Author Topic: Measy FULL HD 1080P Player (Read 251173 times)

d1towatchout4 · « **Reply #750 on:** Apr 30, 2011 at 04:38 PM »

Quote from: terminator on Apr 29, 2011 at 05:03 PM

Very good, thank you!

Hi Sir,

So far the firmware is showing improvement. BT works, but stops from time to time. I hope you can address this. Also, I can't use the "Eject" Functionality for the USB drives.

Thanks.

garfield03 · « **Reply #751 on:** Apr 30, 2011 at 07:45 PM »

Good News...

New Firmware 9.04 fixed subtitle issue.

MaCMeL · « **Reply #752 on:** May 01, 2011 at 12:24 AM »

Quote from: garfield03 on Apr 30, 2011 at 07:45 PM

Good News...

New Firmware 9.04 fixed subtitle issue.

Any feedback for those who upgraded?

actino · « **Reply #753 on:** May 01, 2011 at 07:44 AM »

Has the issue with multi channel AAC audio been fixed with V9.04?

Thanks

sonnyboipunx · « **Reply #754 on:** May 01, 2011 at 02:58 PM »

at last!!!!

to those who tried it pls give some feedbacks, maybe will try it tomorrow if ok already, tanx a lot guys!

emer090765 · « **Reply #755 on:** May 02, 2011 at 06:26 AM »

Quote from: sonnyboipunx on May 01, 2011 at 02:58 PM

at last!!!!

to those who tried it pls give some feedbacks, maybe will try it tomorrow if ok already, tanx a lot guys!

sir have tried last night, upgraded successful to fw 9.04, so far BT/SAMBA works okay tried dowloading movies and it went okay, one area that i have noticed is that when you are playing a movie with AAC audio codec format measy player is not stable. While playing the movie with AAC -Codec and tried to pause for awhile and then if you are going to resume it the center channel sound is missing. What I have tried after that is to reset the player and it goes back again but then again if you tried to stop or pause the movie the center channel will not work again.
So far other codec works perfectly. I hope measy will take a look in this

sonnyboipunx · « **Reply #756 on:** May 02, 2011 at 03:11 PM »

Quote from: emer090765 on May 02, 2011 at 06:26 AM

sir have tried last night, upgraded successful to fw 9.04, so far BT/SAMBA works okay tried dowloading movies and it went okay, one area that i have noticed is that when you are playing a movie with AAC audio codec format measy player is not stable. While playing the movie with AAC -Codec and tried to pause for awhile and then if you are going to resume it the center channel sound is missing. What I have tried after that is to reset the player and it goes back again but then again if you tried to stop or pause the movie the center channel will not work again.
So far other codec works perfectly. I hope measy will take a look in this

ok thats good, the only thing im concern is the Bt/ Samba and subtitles, but better if they fix that bug, tanx a lot man, will try it later!

argydapogi · « **Reply #757 on:** May 03, 2011 at 08:39 AM »

mga sir, pwede bang magpaturo kung paano mag download ng movies? nag upgrade na ako ng FW at gumagana na ang subtitles. di ko pa kasi na try mag download ng movie. thanks!

d1towatchout4 · « **Reply #758 on:** May 03, 2011 at 09:21 PM »

Quote from: argydapogi on May 03, 2011 at 08:39 AM

mga sir, pwede bang magpaturo kung paano mag download ng movies? nag upgrade na ako ng FW at gumagana na ang subtitles. di ko pa kasi na try mag download ng movie. thanks!

[/quote

(1) Go to one of the torrent download sites, like kickasstorrents.com ishohunt.com
(2) Search for the movie that you want, and download the torrent file.
(3) Attach your Measy to your Router (assuming you do have one).
(4) Go to Settings => Network => Wired Network Setup and configure it.
(5) Once you're done with the configuration, take note of the IP address of your Measy
(6) Go to your PC's browser, and type the IP address of Measy.
(7) Click the Bit Torrent Module
( Click add torrent
(9) Browse for the torrent file that you've downloaded, and select it.
(10) Measy should now download the movie. You will see this in the "BT" folder of your HDD in Measy.

I hope this helps.

swimteam · « **Reply #759 on:** May 04, 2011 at 12:05 AM »

Quote from: terminator on Apr 29, 2011 at 12:13 PM

Hello my friend, we are planning to add the Transmission 2.2 at the weekend, Next Monday, we will send the link to download.

Wish you all have a great weekend!!

I'm really excited with the inclusion of Transmission in upcoming firmwares (better torrent management and hopefully more stable). It has always been on the top 2 of my wishlist of features for the E8HD.

The other wish is for better movie management (perhaps an integration of xbmc?

)

Thank you sir terminator (and to sir garfield for the support) and goodluck to Measy development

jaime4i · « **Reply #760 on:** May 04, 2011 at 09:04 AM »

thanks for the updated firmware... currently downloading the firmware and ill update my Measy tonight.

argydapogi · « **Reply #761 on:** May 04, 2011 at 09:14 PM »

Quote from: d1towatchout4 on May 03, 2011 at 09:21 PM

Quote from: argydapogi on May 03, 2011 at 08:39 AM
mga sir, pwede bang magpaturo kung paano mag download ng movies? nag upgrade na ako ng FW at gumagana na ang subtitles. di ko pa kasi na try mag download ng movie. thanks!

[/quote

(1) Go to one of the torrent download sites, like kickasstorrents.com ishohunt.com
(2) Search for the movie that you want, and download the torrent file.
(3) Attach your Measy to your Router (assuming you do have one).
(4) Go to Settings => Network => Wired Network Setup and configure it.
(5) Once you're done with the configuration, take note of the IP address of your Measy
(6) Go to your PC's browser, and type the IP address of Measy.
(7) Click the Bit Torrent Module
( Click add torrent
(9) Browse for the torrent file that you've downloaded, and select it.
(10) Measy should now download the movie. You will see this in the "BT" folder of your HDD in Measy.

I hope this helps.

thank you sir for the details instructions, i'll try it now and see if i could download one.

kompressor · « **Reply #762 on:** May 05, 2011 at 09:54 AM »

Gary,

My unit's (purchased from you) cooling fan is very noisy (grinding). Is it included in the warranty? If not, I hope you guys sell a same sized ball-bearing type cooling fan with the same connector.

garfield03 · « **Reply #763 on:** May 05, 2011 at 09:56 AM »

Quote from: kompressor on May 05, 2011 at 09:54 AM

Gary,

My unit's (purchased from you) cooling fan is very noisy (grinding). Is it included in the warranty? If not, I hope you guys sell a same sized ball-bearing type cooling fan with the same connector.

Check mo baka Yung wire Ng fan inside sumasabit Lang.

kompressor · « **Reply #764 on:** May 05, 2011 at 10:10 AM »

Quote from: garfield03 on May 05, 2011 at 09:56 AM

Check mo baka Yung wire Ng fan inside sumasabit Lang.

That was the first thing I checked and I made sure that the wire was wrapped around the fan's body. Nababawasan yung tunog pag kinakatok yung fan.

Sleeve bearing type ba or ball bearing type yung nakalagay na fan sa kanya?

terminator · « **Reply #765 on:** May 05, 2011 at 11:25 AM »

Quote from: swimteam on May 04, 2011 at 12:05 AM

I'm really excited with the inclusion of Transmission in upcoming firmwares (better torrent management and hopefully more stable). It has always been on the top 2 of my wishlist of features for the E8HD.

The other wish is for better movie management (perhaps an integration of xbmc? )

Thank you sir terminator (and to sir garfield for the support) and goodluck to Measy development

Oh my God, my dear friend! May God Bless you!
Today, I will send you the link to test the new FW for E8HD.

terminator · « **Reply #766 on:** May 05, 2011 at 01:48 PM »

Quote from: swimteam on May 04, 2011 at 12:05 AM

I'm really excited with the inclusion of Transmission in upcoming firmwares (better torrent management and hopefully more stable). It has always been on the top 2 of my wishlist of features for the E8HD.

The other wish is for better movie management (perhaps an integration of xbmc? )

Thank you sir terminator (and to sir garfield for the support) and goodluck to Measy development

As promised, I am back with the new FW for E8HD, we add the web-page control FW. Please download and test from the link:
http://www.sendspace.com/file/t6x08r

d1towatchout4 · « **Reply #767 on:** May 05, 2011 at 02:11 PM »

Thanks for this, Sir.

d1towatchout4 · « **Reply #768 on:** May 05, 2011 at 03:08 PM »

Terminator, how do you install this?

jaime4i · « **Reply #769 on:** May 05, 2011 at 04:41 PM »

upgraded my Measy...
Is it possible to read the subtitle file --- .srt ?

terminator · « **Reply #770 on:** May 05, 2011 at 07:06 PM »

Quote from: d1towatchout4 on May 05, 2011 at 03:08 PM

Terminator, how do you install this?

Hello my friend, if you need upgrade the FW, Please press "download" at this page, and check.
http://www.measy.com.cn/download/showdownload42_en.htm

terminator · « **Reply #771 on:** May 05, 2011 at 07:07 PM »

Quote from: jaime4i on May 05, 2011 at 04:41 PM

upgraded my Measy...
Is it possible to read the subtitle file --- .srt ?

Yes, why not?

terminator · « **Reply #772 on:** May 05, 2011 at 07:08 PM »

Quote from: terminator on May 05, 2011 at 07:07 PM

Yes, why not?

In the movie "terminator" I can say "I AM BACK", and with new FW! haha...

d1towatchout4 · « **Reply #773 on:** May 05, 2011 at 07:34 PM »

SIr, I'm referring to this firmware that you uploaded: http://www.sendspace.com/file/t6x08r

How do you install that firmware?

jaime4i · « **Reply #774 on:** May 06, 2011 at 05:48 AM »

Quote from: terminator on May 05, 2011 at 07:07 PM

Yes, why not?

im watching harry potter last night. when i try to press the subtitle in the remote, the screen says no subtitle. but i have a subtitle file in happy potter main folder .srt

beginner · « **Reply #775 on:** May 06, 2011 at 06:25 AM »

Make sure the movie file has the same name as the srt file and they have to be in the same folder. (i.e. Harry.Potter.2006.1080p.mkv should have an associated srt file Harry.Potter.2006.1080p.srt)

jaime4i · « **Reply #776 on:** May 06, 2011 at 07:16 AM »

Quote from: beginner on May 06, 2011 at 06:25 AM

Make sure the movie file has the same name as the srt file and they have to be in the same folder. (i.e. Harry.Potter.2006.1080p.mkv should have an associated srt file Harry.Potter.2006.1080p.srt)

thank you sir

hunaqua · « **Reply #777 on:** May 06, 2011 at 06:10 PM »

Quote from: terminator on May 05, 2011 at 07:08 PM

In the movie "terminator" I can say "I AM BACK", and with new FW! haha...

Thank you my Friend!

Transmissionbt (4gb) 1.5Hr
Bt (4gb) 4 Hr

emer090765 · « **Reply #778 on:** May 06, 2011 at 08:47 PM »

Quote from: hunaqua on May 06, 2011 at 06:10 PM

Thank you my Friend!

Transmissionbt (4gb) 1.5Hr
Bt (4gb) 4 Hr

sir I'm just curious with your speed, what is your internet speed? And what is the fw you have loaded with your measy? is it the new fw 9.04?

d1towatchout4 · « **Reply #779 on:** May 06, 2011 at 10:34 PM »

Quote from: hunaqua on May 06, 2011 at 06:10 PM

Thank you my Friend!

Transmissionbt (4gb) 1.5Hr
Bt (4gb) 4 Hr

How do you install the firmware that our friend, Terminator, sent? It is not the usual "install.img" that we get to see, so I'm not sure how to install it.

Thank you, my Friend for helping.