Author Topic: Measy FULL HD 1080P Player (Read 251476 times)

MaCMeL · « **Reply #780 on:** May 07, 2011 at 02:17 AM »

How do you set the subs to show always, it's a pain when you're watching TV Series???

bukoy · « **Reply #781 on:** May 07, 2011 at 09:31 AM »

If you gonna download .srt file, better test it first in a computer if its properly syncronized to your movie file, kung match ang subtitle change the file name of the .srt file identical to the filename of your movie in-order that the Measy player could recognize/detect the subtitle file, just sharing

actino · « **Reply #782 on:** May 07, 2011 at 12:45 PM »

Quote from: MaCMeL on May 07, 2011 at 02:17 AM

How do you set the subs to show always, it's a pain when you're watching TV Series???

If file is in mkv format and the subs are in the file as well then you must have the mkv file remuxed to have subtitle always show.

That way whenever you play the mkv file the subtitle will always show up.

MaCMeL · « **Reply #783 on:** May 07, 2011 at 02:16 PM »

Quote from: actino on May 07, 2011 at 12:45 PM

If file is in mkv format and the subs are in the file as well then you must have the mkv file remuxed to have subtitle always show.

That way whenever you play the mkv file the subtitle will always show up.

Thank you for the input, but that will be even more PITA as I have tons of TV Series and if I remuxed it, that will take ages.

I think that there should be an option to set the subs to on or off system wide

Going back to 8.95R again

wacky0510 · « **Reply #784 on:** May 12, 2011 at 09:22 AM »

is it worth upgrading to v9.04 from v8.80? what are the upsides?

kompressor · « **Reply #785 on:** May 12, 2011 at 01:37 PM »

Upgraded to 9.04 but I didn't find the BT client to be stable since it stops from time to time. Is this the same case with 8.80? 8.95R also has the same issue with the BT client where the HDD "disappears" from the selection when adding torrent files and the status in the main page shows "stopped".

Will be forcing again a downgrade to 6.23AW. The BT and samba client of 6.23AW never let me down.

ryudo05 · « **Reply #786 on:** May 14, 2011 at 04:34 PM »

I have bug issues with 8.95R. I just downgraded from 9.04 because some of my HD movies that has 6.0ch audio does not play properly when I just use a regular stereo plug on my TV going to the measy.

But right now, i am a little annoyed with the auto scanning of hard drives whenever I start the player. I tried turning off the auto scan feature but still the player auto scans the hard drive.

Any fix on this one? I have FW 8.80, will it be better than 8.95R?

MaCMeL · « **Reply #787 on:** May 15, 2011 at 10:52 AM »

Quote from: ryudo05 on May 14, 2011 at 04:34 PM

I have bug issues with 8.95R. I just downgraded from 9.04 because some of my HD movies that has 6.0ch audio does not play properly when I just use a regular stereo plug on my TV going to the measy.

But right now, i am a little annoyed with the auto scanning of hard drives whenever I start the player. I tried turning off the auto scan feature but still the player auto scans the hard drive.

Any fix on this one? I have FW 8.80, will it be better than 8.95R?

Why don't you try re flashing the 8.95R again and see if it fixes it. Would you mind sharing you 8.80FW so that I can try it also.

THE Dream · « **Reply #788 on:** May 15, 2011 at 10:55 PM »

Long time..no log.

Still enjoying my Measy Player in Marathon. With the built-in fan, heat is not a problem. I Love the Cover Art too. Upgraded from 6.23AW to FW 9.04

Cheers sir garfield...

kompressor · « **Reply #789 on:** May 16, 2011 at 10:58 PM »

Downgraded to 6.23AW from 9.04 and my BT client is back on happy times. I also managed to get rid of my noisy fan problem by spraying contact cleaner in the fan's bearing area (I guess something got stuck in the sleeve bearing area) and now my unit is noise free. Still, I'll start searching for a same sized ball bearing fan.

Gary,

I guess my warranty is voided eh?

As for me, the most stable FW for overall use is still 6.23AW (I don't have a download link of 8.80 industrial so I can't give my opinions regarding that FW). Tried 8.95R, 9.02 and 9.04 but all my needs still drive me back to 6.23AW. (Subtitles, playback, BT and Samba)

garfield03 · « **Reply #790 on:** May 17, 2011 at 06:33 AM »

Quote from: kompressor on May 16, 2011 at 10:58 PM

Downgraded to 6.23AW from 9.04 and my BT client is back on happy times. I also managed to get rid of my noisy fan problem by spraying contact cleaner in the fan's bearing area (I guess something got stuck in the sleeve bearing area) and now my unit is noise free. Still, I'll start searching for a same sized ball bearing fan.

Gary,

I guess my warranty is voided eh?

As for me, the most stable FW for overall use is still 6.23AW (I don't have a download link of 8.80 industrial so I can't give my opinions regarding that FW). Tried 8.95R, 9.02 and 9.04 but all my needs still drive me back to 6.23AW. (Subtitles, playback, BT and Samba)

as long as your unit still within the 1 yr period. Warranty ako bahala

tatubias · « **Reply #791 on:** May 21, 2011 at 10:28 PM »

hi guys;
i had the player with 8.8 firmware installed, then i decided to updated to 9.4 and it got bricked. now is version 9.05 and i have re installed it too. and it still bricked.

when it stats it shows the HD PLAYER imagen and the it reboots. do some knows how to fix the this issue.

here i have attached some videos so you can see what is happening.

i have updated the firmware to 9.05 and it happends the same that 9.03 and 9.04.

here it is how it is view if you connect to AV rca cables.(no colors)
http://www.youtube.com/watch?v=nhgZXn3QlVU

Uploaded with ImageShack.us

here it is how it starts connected thought HDMI cable. (it has colors)
http://www.youtube.com/watch?v=7uLYsogw6Ds

Here it is the flashing video file. (is is in white and black) connected thougut AV connectos RCA. firmware is 9.05 downloaded today from your site.
http://www.youtube.com/watch?v=_sGojBOssCo

some imagenes.

Uploaded with ImageShack.us

i hope we can get a solution for this.

garfield03 · « **Reply #792 on:** May 21, 2011 at 10:36 PM »

@ tatubias

Try to re-flash using fw 9.04..you know how to force re-flash? If not, give me your email add.

tatubias · « **Reply #793 on:** May 21, 2011 at 10:38 PM »

i have reflashed to 9.03 9.04 and 9.05 and it happends the same.

garfield03 · « **Reply #794 on:** May 21, 2011 at 10:42 PM »

Quote from: tatubias on May 21, 2011 at 10:38 PM

i have reflashed to 9.03 9.04 and 9.05 and it happends the same.

Did you get the right fw? I assume your model is the one with pop-up tray. If all is correct, just bring it to your seller. They fix it for you.

tatubias · « **Reply #795 on:** May 21, 2011 at 10:46 PM »

This is the version that i have. is E8HD

http://www.measy.com.cn/product/showproduct13_en.htm

im in argentina, and my seller is in China, so i would not be possible

garfield03 · « **Reply #796 on:** May 21, 2011 at 10:50 PM »

Quote from: tatubias on May 21, 2011 at 10:46 PM

This is the version that i have. is E8HD

http://www.measy.com.cn/product/showproduct13_en.htm

im in argentina, and my seller is in China, so i would not be possible

ok..its possible you might have corrupt firmware. Try to check on this thread. a few pages back, I uploaded firmware 8.95R. Have it download and re-flash your unit. Give me update...

tatubias · « **Reply #797 on:** May 22, 2011 at 01:04 AM »

Quote from: garfield03 on May 21, 2011 at 10:50 PM

ok..its possible you might have corrupt firmware. Try to check on this thread. a few pages back, I uploaded firmware 8.95R. Have it download and re-flash your unit. Give me update...

I have installed the firmware 8.95 and it worked as it should.

Thank you very much. i will be contacting measy support to let them know the finding so the can release a new version of the firmware.

Thank you very much.

do you know how to make the device boot with AV connectors and not with hdmi. because is it is connected thoug AV connectors you dont get the menu images.

garfield03 · « **Reply #798 on:** May 22, 2011 at 06:35 AM »

@tatubias

Go to video setting under setup and select NTSC or PAL depend on your TV.

MaCMeL · « **Reply #799 on:** May 22, 2011 at 11:02 AM »

Quote from: tatubias on May 21, 2011 at 10:38 PM

i have reflashed to 9.03 9.04 and 9.05 and it happends the same.

I just noticed that there's a new FW (9.05) from the above post, anyone who tried please give a feedback.

tatubias · « **Reply #800 on:** May 23, 2011 at 01:01 AM »

Quote from: 3j on May 22, 2011 at 09:09 PM

FW 9.05 first observation after installation: Great improvement in Audio re: AAC file working now, subtitle problem solve...

fyi.

Could you upload the firmware no commpressed into mega upload or some other site. so i can download. if i down load the one on measy site i dont know if i have some issue when i decompress the file. then when i try to flash the firmware, my media player get BRIKED. the only firmware that worked on my Mediaplayer was the one that garfield uploaded 8.95. and im very interested in the new stuff provided by the new firmwares.

tatubias · « **Reply #801 on:** May 23, 2011 at 01:04 AM »

garfield03;
Does the firmware 8.95 has bittorrent and NAS options?. because i did not fin the BT / Samba option.

Thank you very much.

tatubias · « **Reply #802 on:** May 23, 2011 at 01:08 AM »

Here it is the new stuff provided by the Firmware V9.05.

1. The compatibility is improved better compared with the former edition, which solves the repeat start or remain FULL HDD interface after upgrading

2. Add the function of webpage control platform, Please download Webpage control platform user's manual.

links Measy Site:Firmware 9v.05 E8HD
http://www.measy.com.cn/soft_download/E8HD/V9.05.rar

Webpage control plaform user's manual
http://www.measy.com.cn/soft_download/E8HD/Webpage%20manual.rar

V8.8 force update to over V9.0* for E8HD
http://www.measy.com.cn/soft_download/E8HD/V8.8%20force%20update.rar

NOTE: i did not tested this firmware.

hooyah · « **Reply #803 on:** May 23, 2011 at 03:42 PM »

My few questions lang, pwede ba gamitin ang wifi dongle na nabibili sa CD-R king? should i update my player? and how will i update the system since hindi pa sya connected sa wifi, pwede ba sya ma update like i connect ung Measy sa PC ko? and also how will i make it ready for Download or make it as a BT downloader?

Thanks

garfield03 · « **Reply #804 on:** May 23, 2011 at 06:28 PM »

@hooyah

Yes u can use cdr-king wifi N dongle. the one selling at P 580.00 bucks. No need to upgrade system/firmware. Your unit is BT download ready.

For BT instruction, search this thread.

tatubias · « **Reply #805 on:** May 23, 2011 at 06:32 PM »

Quote from: garfield03 on May 23, 2011 at 06:28 PM

@hooyah

Yes u can use cdr-king wifi N dongle. the one selling at P 580.00 bucks. No need to upgrade system/firmware. Your unit is BT download ready.

For BT instruction, search this thread.

i did test EDUP wifi 802.11 n dongle and it work perfect. ass soon you connected is detected, then you need to go to SETUP --> wireless network and there you can configure.

here you can buy it.

http://www.dealextreme.com/p/300mbps-wifi-high-definition-tv-wireless-card-adapter-71122
or
http://www.focalprice.com/CN162B/300Mbps_WiFi_HighDefinition_TV_Wireless_Card_Adapter_Black.html

or search in google : 300Mbps WiFi High-Definition TV Wireless Card Adapter

hooyah · « **Reply #806 on:** May 24, 2011 at 10:07 AM »

@garfield03, tatubias Thanks sir, planning to buy a 2T HDD then make it as a BT downloader na eh para ndi na ako maglipat-lipat pa ng files

toys4geeks · « **Reply #807 on:** May 24, 2011 at 12:23 PM »

@tatubias,

sir,

were you able to buy and test the 2 URLS you provided below? Did it work with Measy E8HD?

Quote from: tatubias on May 23, 2011 at 06:32 PM

i did test EDUP wifi 802.11 n dongle and it work perfect. ass soon you connected is detected, then you need to go to SETUP --> wireless network and there you can configure.

here you can buy it.

http://www.dealextreme.com/p/300mbps-wifi-high-definition-tv-wireless-card-adapter-71122
or
http://www.focalprice.com/CN162B/300Mbps_WiFi_HighDefinition_TV_Wireless_Card_Adapter_Black.html

or search in google : 300Mbps WiFi High-Definition TV Wireless Card Adapter

kompressor · « **Reply #808 on:** May 24, 2011 at 04:13 PM »

Has anyone tested 9.05's BT/Samba function? I was never happy with 9.04's.

tatubias · « **Reply #809 on:** May 24, 2011 at 05:26 PM »

Quote from: toys4geeks on May 24, 2011 at 12:23 PM

@tatubias,

sir,

were you able to buy and test the 2 URLS you provided below? Did it work with Measy E8HD?

@toysgeek;
I did buy from focal price the wifi dongle. You can buy form focal price or deal extreme they have free shipping around the world. and they are very trust full. you will wait aboyt 20 days until it gets into your home. you can pay though pay pal. or credit card (C.C. in Deal extreme only)