Author Topic: Measy FULL HD 1080P Player (Read 251199 times)

tatubias · « **Reply #810 on:** May 25, 2011 at 09:32 PM »

hi guys i finally decided to buy a new tv. and connect the device using hdmi.

i have also installed a 2Tbytes hard drive Western Digital WD20EARS Sata/ 64mb Cache. I installed the hard drive, the i formated and was detected.

i have installed firmware 8.95. what i have realize is that it does NOT have bit torrent client. do some one know how to enable?

I have realize also that when i see you tube o others web content the image flick. It goes into black very quick and then it cames ok again. This is constant. any idea what could it be?

tatubias · « **Reply #811 on:** May 25, 2011 at 10:08 PM »

Quote from: garfield03 on May 22, 2011 at 06:35 AM

@tatubias

Go to video setting under setup and select NTSC or PAL depend on your TV.

The NTSC or PAL options some time appears. it seems to be related with the tv you connect to the device.

finaly i decided to buy a lcd with hdmi to forget those issues. today i will try to apply firmware 9.05 again.

i will let you know the update.

tatubias · « **Reply #812 on:** May 26, 2011 at 01:14 AM »

Quote from: tatubias on May 25, 2011 at 10:08 PM

The NTSC or PAL options some time appears. it seems to be related with the tv you connect to the device.

finaly i decided to buy a lcd with hdmi to forget those issues. today i will try to apply firmware 9.05 again.

i will let you know the update.

i did re installed firmware 9.05 and it did not start. i have sent a mail to the support i hope they can fix this issue on my device. now i have again 8.95 running.

tatubias · « **Reply #813 on:** May 26, 2011 at 11:55 PM »

Quote from: tatubias on May 25, 2011 at 09:32 PM

hi guys i finally decided to buy a new tv. and connect the device using hdmi.

i have also installed a 2Tbytes hard drive Western Digital WD20EARS Sata/ 64mb Cache. I installed the hard drive, the i formated and was detected.

i have installed firmware 8.95. what i have realize is that it does NOT have bit torrent client. do some one know how to enable?

I have realize also that when i see you tube o others web content the image flick. It goes into black very quick and then it cames ok again. This is constant. any idea what could it be?

i have installed firmware 8.95. what i have realize is that it does NOT have bit torrent client. do some one know how to enable?
It Seems That is not supported for what i was able to read in this firmware

I have realize also that when i see you tube o others web content the image flick. It goes into black very quick and then it cames ok again. This is constant. any idea what could it be?
It is not flicking anyloger, itmay be somthing with the configuration of the video mode

Im still not able to flash the player to a 9.x version

tatubias · « **Reply #814 on:** May 27, 2011 at 08:20 AM »

@Garfield
hey i still have intalle 8.95fw the news does not work on my e8hd.

i was able to acces to bittorrent does it works? is it stable? because i have added 3 movies with a lot of seeds and it does not down load much.

samba is incredible slow?

thankyou

tatubias · « **Reply #815 on:** May 27, 2011 at 09:36 PM »

Little hacks.

i was able to access the e8dh device though telnet.

1 - connect to your network the e8hd.
2 - configure it, so you can access

3 - go to the CMD and run telnet (E8HD IP)
user: root
pass: (it does not have password)

As you can see is a Linux Venus 2.6.12.6-VENUS

There you can access to all configuration files.

as an example i edit the resolv.conf file to update DNS ips.

to edit files you user vi command.

toys4geeks · « **Reply #816 on:** May 28, 2011 at 07:41 AM »

+1! yodaman!

I guess from here you can set the name ng SMB share sa .conf nya!

Quote from: tatubias on May 27, 2011 at 09:36 PM

Little hacks.

i was able to access the e8dh device though telnet.

1 - connect to your network the e8hd.
2 - configure it, so you can access

3 - go to the CMD and run telnet (E8HD IP)
user: root
pass: (it does not have password)

As you can see is a Linux Venus 2.6.12.6-VENUS

There you can access to all configuration files.

as an example i edit the resolv.conf file to update DNS ips.

to edit files you user vi command.

tatubias · « **Reply #817 on:** May 28, 2011 at 09:13 AM »

Samba configuration files are:

/usr/local/bin/package/samba/conf # ls

smb_anonymous_head.conf smb_user_head.conf

/usr/local/bin/package/samba/conf # cat smb_anonymous_head.conf
[global]
security=share
log file=/usr/local/samba/var/log.%m
max log size=2000
domain logons=Yes
dns proxy=No
use sendfile=yes
guest account=root
encrypt passwords=yes
passdb backend=smbpasswd
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=8192 SO_RCVBUF=8192
read raw=yes
write raw=yes
oplocks=yes
max xmit=65535
dead time=15
getwd cache=yes
lpq cache=30
read prediction=yes
client NTLMv2 auth=yes
/usr/local/bin/package/samba/conf #

-------------------------------------------

/usr/local/bin/package/samba/conf # cat smb_user_head.conf
[global]
security=user
log file=/usr/local/samba/var/log.%m
max log size=2000
domain logons=Yes
dns proxy=No
use sendfile=yes
guest account=root
encrypt passwords=yes
passdb backend=smbpasswd
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=8192 SO_RCVBUF=8192
read raw=yes
write raw=yes
oplocks=yes
max xmit=65535
dead time=15
getwd cache=yes
lpq cache=30
read prediction=yes
client NTLMv2 auth=yes
/usr/local/bin/package/samba/conf #

--------------------------

One is used to config the login with anonymous user and the other is used as smb user.

tatubias · « **Reply #818 on:** May 28, 2011 at 09:19 AM »

here it is the smb.conf

/usr/local/bin/package/samba/conf # cat /tmp/smb/smb.conf
[global]
security=share
log file=/usr/local/samba/var/log.%m
max log size=2000
domain logons=Yes
dns proxy=No
use sendfile=yes
guest account=root
encrypt passwords=yes
passdb backend=smbpasswd
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=8192 SO_RCVBUF=8192
read raw=yes
write raw=yes
oplocks=yes
max xmit=65535
dead time=15
getwd cache=yes
lpq cache=30
read prediction=yes
client NTLMv2 auth=yes
[HDD]
path=/tmp/hdd/volumes/HDD1
hide dot files=yes
hide files=/.*/lost+found/
guest ok=yes
writable=yes
force create mode=0775
force directory mode=0775
/usr/local/bin/package/samba/conf #

tatubias · « **Reply #819 on:** May 28, 2011 at 09:50 AM »

Tutorial how to install FTP Server: E8HD

it is supposed that you have an hd installed on the system. this is the way i did. The software fot this example will be located on the hard drive. its better if you install it on the internal memory of the system.

Tutorial:

cd /tmp/hdd/volumes/HDD1
mkdir ftp
cd ftp
wget http://rtd1261.wikidot.com/local--files/files/ftpscript.zip
unzip ftpscript.zip

Make a backup of the config file if you make a mistake on the original
cp /tmp/hdd/volumes/HDD1/ftp/bftpd.conf /tmp/hdd/volumes/HDD1/ftp/bftpd.conf.original

Edit the configuration file:
vi /tmp/hdd/volumes/HDD1/ftp/bftpd.conf

Replace the following lines.

PATH_BFTPDUTMP="/var/tmp/bftpdutmp" to PATH_BFTPDUTMP="/tmp/hdd/volumes/HDD1/ftp/bftpdutmp"
MOTD_GLOBAL="/var/tmp/ftpmotd" to MOTD_GLOBAL="/tmp/hdd/volumes/HDD1/ftp/ftpmotd"
PATH_FTPUSERS="/var/tmp/ftpusers" to PATH_FTPUSERS="/tmp/hdd/volumes/HDD1/ftp/ftpusers"

To start ftp server:
/tmp/hdd/volumes/HDD1/ftp/bftpd -d -c /tmp/hdd/volumes/HDD1/ftp/bftpd.conf

if you want the ftp server start every time the media player starts add the following.

Edit init the startscript

vi /etc/inetd.conf

and replace ftp line by:

ftp stream tcp nowait root /tmp/hdd/volumes/HDD1/ftp/bftpd -d -c /tmp/hdd/volumes/HDD1/ftp/bftpd.conf

Reboot Media player.

you can access with root user and no password.

If you want to edit the login path of the root user you can modify ROOTDIR as i did in the example. Edit /tmp/hdd/volumes/HDD1/ftp/bftpd.conf

user root {
ANONYMOUS_USER="yes"
ROOTDIR="/tmp/hdd/volumes/HDD1"
}

sonnyboipunx · « **Reply #820 on:** May 28, 2011 at 02:52 PM »

^

sorry guys for a noob question, whats all about that configuration?
and by the way, dont update on 9.05 fw, its crap!

tatubias · « **Reply #821 on:** May 29, 2011 at 05:57 AM »

Quote from: sonnyboipunx on May 28, 2011 at 02:52 PM

^

sorry guys for a noob question, whats all about that configuration?
and by the way, dont update on 9.05 fw, its crap!

firmware 9.05 yes it does all of that. but if you like to play with the device you can make it do more things. as an example you can be able to add an other torrent clients that is more stable an fast.

and the MOST IMPORTANT THING. if i install any 9.x firmware my device DONT WORK. so im waiting until a new firmware is out and test it.

raider125jeigh · « **Reply #822 on:** May 29, 2011 at 09:53 PM »

guys any feedback on this Measy A1HD Full 1080P Media Player

P2200 lang e... mas ok kaya to kesa sa H1055 plus

parang gusto ko kasi may optical out... please ung mga bumili na feedback

garfield03 · « **Reply #823 on:** May 29, 2011 at 10:24 PM »

Quote from: raider125jeigh on May 29, 2011 at 09:53 PM

guys any feedback on this Measy A1HD Full 1080P Media Player

P2200 lang e... mas ok kaya to kesa sa H1055 plus

parang gusto ko kasi may optical out... please ung mga bumili na feedback

Bro..please re-post sa A1HD thread. Thanks!

MaCMeL · « **Reply #824 on:** May 30, 2011 at 09:25 PM »

Hi Guys

I have an issue.. I forgot to bring the measy remote. Can I control the E8HD via the webpage control panel? If not; can I use a harmony one to control it?

shauntot · « **Reply #825 on:** Jun 02, 2011 at 09:30 AM »

Quote from: MaCMeL on May 30, 2011 at 09:25 PM

Hi Guys

I have an issue.. I forgot to bring the measy remote. Can I control the E8HD via the webpage control panel? If not; can I use a harmony one to control it?

same question, anyone nakagamit ng harmony remote with our measy?

garfield03 · « **Reply #826 on:** Jun 02, 2011 at 12:36 PM »

Quote from: MaCMeL on May 30, 2011 at 09:25 PM

Hi Guys

I have an issue.. I forgot to bring the measy remote. Can I control the E8HD via the webpage control panel? If not; can I use a harmony one to control it?

The problem is without the remote. You can't see what ip address of the Measy. So web control is not possible. Sorry!

paolorenzo · « **Reply #827 on:** Jun 02, 2011 at 01:14 PM »

Quote from: garfield03 on Jun 02, 2011 at 12:36 PM

The problem is without the remote. You can't see what ip address of the Measy. So web control is not possible. Sorry!

For the more techie ones, and have the right router features, you should be able to see all IP addresses and device names on the router's DHCP table... Baka makita nyo yung Measy dun, with the corresponding IP address...

tatubias · « **Reply #828 on:** Jun 02, 2011 at 07:06 PM »

Quote from: garfield03 on Jun 02, 2011 at 12:36 PM

The problem is without the remote. You can't see what ip address of the Measy. So web control is not possible. Sorry!

to solve that you can do the following.

connect you windows pc to the networkg
go to Start --> Run
type CMD then click en OK

[/URL

run in the cmd screen ipconfig There you can see what it your ip.

example:
c:\>ipconfig

Windows IP Configuration

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.11 ( this is your pc)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1 ( this is the internet router)

Ethernet adapter {E2974172-532D-4F50-840E-C9087DCB5D56}:

Media State . . . . . . . . . . . : Media disconnected
....
...
--------------
[URL=http://imageshack.us/photo/my-images/534/96237127.jpg/]

If you see Default Gateway That is the ip of your internet router probably the media player it is in the same network.

so you will need to to some ping tests to verify which ip is the correct one.

example. in the command line windows type. ping 192.168.0.2

c:\ping 192.168.0.2

Pinging 192.168.0.2 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.0.2:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

c:\>

-----------
As you can see in that output you do not have any connectivity. let see an example that it has.

c:\>ping 192.168.0.15

Pinging 192.168.0.15 with 32 bytes of data:

Reply from 192.168.0.15: bytes=32 time=5ms TTL=64
Reply from 192.168.0.15: bytes=32 time=1ms TTL=64
Reply from 192.168.0.15: bytes=32 time=1ms TTL=64
Reply from 192.168.0.15: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.0.15:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 5ms, Average = 2ms

c:\>

Here you can see that a device has response to you request. but you still dont know if its your media player or other computer. you you can do the next test to check if it is the correct one.

type telnet 192.168.0.15
the windows goes black and then appears a login screen
Venus login:

If That happens it means that that is you Media player you can use that ip to access to it.

en the windows explorer type \\192.168.0.15\ and you will be able to see it.

you will need to repet this procedure until you get the ip of the media player, you will need to ping secuencialy untill you get the correct ip

ping 192.168.0.2
ping 192.168.0.3
ping 192.168.0.4
ping 192.168.0.5
..
...
ping 192.168.0.60

probably will be located in the first 10 or 20 ips.

tatubias · « **Reply #829 on:** Jun 02, 2011 at 07:22 PM »

Quote from: paolorenzo on Jun 02, 2011 at 01:14 PM

For the more techie ones, and have the right router features, you should be able to see all IP addresses and device names on the router's DHCP table... Baka makita nyo yung Measy dun, with the corresponding IP address...

An other possibility is lke paolo is telling us. you can access into the router web interface and then search for the ips connected into your device. there you will be able to see your computers and others that are connected in your network. also you will be able to see your media player listed.

MaCMeL · « **Reply #830 on:** Jun 02, 2011 at 09:29 PM »

Quote from: garfield03 on Jun 02, 2011 at 12:36 PM

The problem is without the remote. You can't see what ip address of the Measy. So web control is not possible. Sorry!

Hi garfield...
That is not an issue as I can easily get it's ip address with an app I have on my iphone. So my question remains.. is the play/pause/browse file possible with the web control? I am asking this because I am currently on 8.95R and as I understand that the web control is available only in the latest 9.05?

tatubias · « **Reply #831 on:** Jun 02, 2011 at 11:44 PM »

Quote from: MaCMeL on Jun 02, 2011 at 09:29 PM

Hi garfield...
That is not an issue as I can easily get it's ip address with an app I have on my iphone. So my question remains.. is the play/pause/browse file possible with the web control? I am asking this because I am currently on 8.95R and as I understand that the web control is available only in the latest 9.05?

It supposed that 9.05 have that possibility. i have not installed yet it does not work on my device.

actino · « **Reply #832 on:** Jun 03, 2011 at 06:19 AM »

FW9.05:
- still cannot output AAC 5.1 properly.
- Center channel audio is still missing.
- Subtitles working properly.

So far it is either convert audio of all films or stay with 8.95

Please fix the AAC multi channel audio. Thanks.

tatubias · « **Reply #833 on:** Jun 03, 2011 at 06:24 PM »

I will be testing non official Firmwares this weekend. i will let you know if some one work with my e8hd

tatubias · « **Reply #834 on:** Jun 03, 2011 at 06:44 PM »

Quote from: actino on Jun 03, 2011 at 06:19 AM

FW9.05:
- still cannot output AAC 5.1 properly.
- Center channel audio is still missing.
- Subtitles working properly.

So far it is either convert audio of all films or stay with 8.95

Please fix the AAC multi channel audio. Thanks.

Please report the bugs at [email protected] so they can fix them and relase a new firmware.

d1towatchout4 · « **Reply #835 on:** Jun 03, 2011 at 09:55 PM »

Guys, any of you know anyone who sells Measy E8DVR? The one that records TV shows and also plays movies and stuff?

Please let me know as I am interested in buying... Thanks.

garfield03 · « **Reply #836 on:** Jun 03, 2011 at 11:58 PM »

Quote from: d1towatchout4 on Jun 03, 2011 at 09:55 PM

Guys, any of you know anyone who sells Measy E8DVR? The one that records TV shows and also plays movies and stuff?

Please let me know as I am interested in buying... Thanks.

I Had a few units E9DVR. same feature just physically different. Give you PM.

d1towatchout4 · « **Reply #837 on:** Jun 04, 2011 at 05:05 PM »

yes please, will wait for your pm. or better yet, email me pls at [email protected]

ricardoabm · « **Reply #838 on:** Jun 05, 2011 at 03:05 AM »

Hi

I have a E8HD and I experience dreadful speed when using samba to transfer files (200 to 500 KB/s) and bt is totally unstable. I´m using FW 9.05. My device uses the rtd1073 chipset.

Does any one have the same problem?

I tried the ftp tutorial but my devide does not have the folder volumes inside /tmp/hdd. Does FTP improve speed?

tks

garfield03 · « **Reply #839 on:** Jun 05, 2011 at 11:43 AM »

Quote from: d1towatchout4 on Jun 04, 2011 at 05:05 PM

yes please, will wait for your pm. or better yet, email me pls at [email protected]

email sent