Topic: Measy X5 (RTD 1186) Full 3D HD Player

[raider125jeigh]

how's the quality of the 2D movie, same ng mga 2d ISO's?

same lang ...afais



elms anung full 3d iso mo ang asaken?
para matry ko

[≧◉◡◉≦xrampage≧◉◡◉≦]

same lang ...afais



elms anung full 3d iso mo ang asaken?
para matry ko

Yung mga new 3D may 2D version mga yan so mag play as 2D may mga bluray lang na 3D only wala 2D version like shrek wala na ako maisip na ibang 3D bluray na 3D only. 

Based on what Ive read and comparative shots between 2D-In-3D-Bluray and plain 2D Bluray, not necessarily the same especially the color saturation..BUT...it probably won't be a big deal because a movie is a fast moving sequence of frames as opposed to stationary frame - so I would guess na no big deal.  I was just looking at the comparison screenshots of the latest Resident Evil series (when TF will that series end? - havent even watched a single Resident Evil movie-  hehehe) and the 3D Left-Eye Frame (the frame that plays under 2D mode) looks certainly brighter than the 2D release.

Even amongst Full BD (2D) releases, sometimes iba-iba ang video bitrates so a certain release (CEE, US, EU, Asia, Japan for instance), may look better than another release of the same title...BUT..again no big deal in my opinion basta taken from the same Master source.  Usual exception are the Russian BDs..they usually suck. 

Yan din napansin ko and most ng 2D only has video bitrate than the 3D but 3D has a 2x1080p so parang 2x din yung video bitrate. 

[raider125jeigh]

yung shrek na nahiram ko sa sa samsung before ung last part may 2d playback un...

[≧◉◡◉≦xrampage≧◉◡◉≦]

yung shrek na nahiram ko sa sa samsung before ung last part may 2d playback un...

Depende nga check the youtube not all naman kasi may 2D. Baka mostly ng asia 3D version may 2D kasi di pa uso ang 3D lalo na sa pinas. wahahha 

[raider125jeigh]

Puwede siya pero may mga 3D bluray kasi na  walang option na 2D as in 3D only check mo yung shrek walang 2D yan di mo puwede play as in 2D only.  

Eto link sa youtube.

http://www.youtube.com/watch?v=qmqgPLjSRXo

e kababasa ko lang nito e...hmpf

[raider125jeigh]

Depende nga check the youtube not all naman kasi may 2D. Baka mostly ng asia 3D version may 2D kasi di pa uso ang 3D lalo na sa pinas. wahahha 

ah ok...gud gud gud..
kaya ko din kinuha mga 3d.iso files kasi nplay dun sa x6 ko

sorry po sa OT...

[≧◉◡◉≦xrampage≧◉◡◉≦]

Naguluhan ako di ba dapat mas mataas na version ang X6 sa X5. kaya ayaw ko mag NMT masalimuot lalo na firmware upgrade.

[bulsecoip]

The one connected to the HTiB seemed really sluggish, it seems to boot much more slowly too.  In fact, the browser and Android apps never seem to want to run.  I have a feeling it's because of the extra optical connection to the HTiB.  It moves much faster when I put the HDMI setting to LPCM and the SPDIF setting to LPCM as well.

When I put the SPDIF setting to RAW (HDMI set to LPCM to save bandwidth) and the surround setting to 5.1, the player stalls and you would have to stop the video file from playing.  When I put the SPDIF setting to LPCM, it works fine but can obviously only output in stereo.  I am now trying different combinations/solutions to see how to output DTS via optical to the LG HTiB.  I will also try different firmwares to see if there is one which actually already solves this. 

Any insight from the other users would definitely be appreciated as well. 

@Verbl Kint
any updates on the sluggish boot when connected to the HTiB and also, do you have the solutions on how to output DTS via optical to the LG HTiB?

I'm eyeing to buy Measy X5 to replace my existing NMT. Does anyone knows where i can buy X5 and how much it will cost? Thank you

[toys4geeks]

@Verbl Kint
any updates on the sluggish boot when connected to the HTiB and also, do you have the solutions on how to output DTS via optical to the LG HTiB?

+1 , check mo sir yung LPCM 5.1 if meron yang setting for it?

[garfield03]

I'm eyeing to buy Measy X5 to replace my existing NMT. Does anyone knows where i can buy X5 and how much it will cost? Thank you

Look for garfield03. You can text him at 09178172163

[bulsecoip]

I have HDTV and LG HTiB, if i play a MKV file with TrueHD and DTS-HDMA sounds using the Measy X5, will it produce 5.1 audio in my LG HTiB?

[gui-berlin]

Hi all 

(I read the thread quite carefully but am still not sure about that point...sorry if I am asking a question which was already asked).

I have a 3d ready dlp video projector (the benq w700) which play 3d in frame sequential.




Until now what I am doing is the following:

I play a SBS file in Stereoscopic player with "Software pageflipping" as viewing method (projector in 120 Hertz) and that way can enjoy 3d (well it's not really good since my cpu is not fast enough).

Would the X5 being able to output the 3d on my dlp-link videoprojector?

I would be really thankful for a clear answer (yes/no) 

Thank you very much in advance!

Greetings from Berlin Germany

[Clondalkin]

A Full 3D Bluray is basically frame sequential as far as I know.  I have spent nearly 2 weeks on another NMT that is powered by the same Realtek chipset as that of the Measy X5 and it definitely plays frame sequential if connected to a 3DTV - it is automatically detected as proper 3D signal.  So I guess the only question that needs to be reconfirmed is the capability of your dlp-link projector to actually do frame sequential...For instance, if you have successfully tested a 3D Bluray on your projector, then the Measy X5 should be OK.  If you are talking of SBS encodes, that's another matter.

Cheers!

Would the X5 being able to output the 3d on my dlp-link videoprojector?

I would be really thankful for a clear answer (yes/no) 

[realsteel]

sir garfield03, pa-pm naman ng price ni measy x5 ty

[gui-berlin]

hi there!

Thank you for your answer Clondalkin.

Well, my vp ist 3d/hd ready => 720p and supports frame senquential (in 120hz) and top/bottom 3d. But it is in hdmi 1.3 and therefore doesn't support 3d blueray.

You mentioned the Side by Side 3d and this is actually what I would like to play. Which means there is a conversion from sbs to frame senquential to be output in 120hz from the vp.

I have then active shutter glasses.


And this is this point I'd like to be sure of before ordering "the beast" ;-)

Here are screenshot from the measy website but they never talk about dlp-link (frame senquential 120hz with active shutter glasses).

I sent them an email more than a week ago but so far... no answer 

Gui

[jtahanlangit]

Just picked up my Measy X5 this afternoon.
Setting up with my components and
....movie....testing...movie...setting up..movie 

By the way,can anyone confirm the X5's LAN port if it is performing as it is advertised(GIGABIT)?

[stockHT]

1. nasaan yung parang xmbc interface?
2. how to reset password to access measy via network?



thanks!

[gui-berlin]

Hi all 

Well, I couldn't resist and order a Measy X5.

It came today and I started playing with.

But... I have the weirdest problem...

Nowhere I can see any 3d options....



And it is supposed to be like this:


any idea? Thank you in advance!

Gui

[Columbia]

1st of all, what kind/format of movie did you play?
2nd, what is the firmware version of your Measy?
3rd, try to add almost all the details that you can think of and include that to your post..

[gui-berlin]

Hi Columbia! Thank you for your super quick answer :-)

1: I played: MKV, mp4, Avi and ts files. All of them in Side by Side.

2: The Firmware is the 2.10. It is the one which was installed, I did not upgrade or anything.

3: My X5 is connected to a videoprojector the w700http://www.benq.com/product/projector/w700/specifications => 3d Dlp-link, 720p native which can be setup in top-bottom or frame sequential. (connected to my laptop the 3d works well but my laptop isn't powerful enough...).

The VP is in hdmi 1.3. I tried the video out too.

 

[toys4geeks]

check mo sir yung 3D handshake. Sa Egreat R300(1186 also), found some users who had a similar problem and was isolated sa cable. the PJ is 3D capable and using HDMI 1.4 , HDMI 1.3 , HDMI 1.3 highspeed, spells the difference. so isolate mo with another 3D display, and/or cable.

in a nutshell, the realtek 1186 stock firmware players sense the 3D capability and displays the 3D video settings only if it sees a compatible 3D display.

[Weng!]

connect your X5 directly to the PJ and you will see the 3D option in the menu. you are probably using a non-3D receiver where the X5 detects it as a non-3D display.

[gui-berlin]

no it's already directly connected to the VP 

[toys4geeks]

no it's already directly connected to the VP 

cable sir.

[gui-berlin]

thank you all for answering!

Unfortunately here too with the cable no luck...

I tried 3 different hdmi cables (one certified 1.4 and there is the one which where in the box too)

Uhm....

[Clondalkin]

perhaps you should try a Top-Bottom 720p content because your PJ can't do SBS?

[gui-berlin]

No you're right.

My VP is doing Frame sequential and tob-bottom.

But I guess the kind of file isn't the problem. I suppose as long it won't see my VP as a 3d device it won't work. Arf I wish there would be a way to force the 3d detection...

I wrote an email to measy, to my vendor and even to benq to ask. So far no answer...

But I am starting to fear I will have to send it back...

Pity, this is a great device!

[Weng!]

No you're right.

My VP is doing Frame sequential and tob-bottom.

But I guess the kind of file isn't the problem. I suppose as long it won't see my VP as a 3d device it won't work. Arf I wish there would be a way to force the 3d detection...

I wrote an email to measy, to my vendor and even to benq to ask. So far no answer...

But I am starting to fear I will have to send it back...

Pity, this is a great device!

may i know what is VP sir? is that an abbreviation of Video Projector?

we all call projectors here as PJ.

sorry about asking this but i just want myself or everyone to understand what you mean.

[gui-berlin]

oups yep sorry I didn't know you were calling video prokectors PJ    (it's what I mean with VP)   

[realsteel]

Question here mga sir.

HDTV ko is Toshiba 40PU200 at meron syang built-in media player via USB but when i used my external drive seagate (500gb) to play MKV-DTS file there is no audio coming out from my TV. Will Measy X5 solve this or any NMT? or should I need DTS-capable HDTV? Or I must have both? In short, what do i need to experience DTS audio from my Tosh 40PU200? I dont have 5.1 speakers yet, just using my TV's speakers.

I appreciate your help and suggestions totally new on this home theater experience. Thanks!