Author Topic: Where Can I Buy a ALUMINUM Casing (for DIY amplifier)? (Read 23022 times)

Ron_21 · « **Reply #30 on:** Nov 04, 2012 at 11:10 AM »

group buy..pati sa kabila

Abad Santos 7 · « **Reply #31 on:** Nov 07, 2012 at 12:57 PM »

Quote from: ASCAS on Oct 26, 2012 at 10:37 PM

What exactly you want? For this 4 choose 1 and I can bring you by first week of January if you are willing to wait.

I think the first 2 (no numbers on the photos) are not pure aluminum.

Cheers.

jlester87 · « **Reply #32 on:** Nov 07, 2012 at 04:05 PM »

Need ko rin ng casing for my diy amps, lalampas kaya ng 2k yung maliit na case about 10" x 4 " 10"?

RXV · « **Reply #33 on:** Nov 10, 2012 at 12:12 AM »

Saan nakukuha ang mga casing na yan? And how much?

Abad Santos 7 · « **Reply #34 on:** Nov 11, 2012 at 09:26 PM »

Quote from: RXV on Nov 10, 2012 at 12:12 AM

Saan nakukuha ang mga casing na yan? And how much?

All these aluminum case are made in China. Prices can range from 1000 to 15000 depending on the
build and finish.

Normally the average price for a decent preamp and amp case can range from 4000 to 8000.

fantom_mayonaise · « **Reply #35 on:** Nov 28, 2012 at 11:36 AM »

sir how much po kaya ito?

Abad Santos 7 · « **Reply #36 on:** Dec 19, 2012 at 09:52 AM »

Quote from: fantom_mayonaise on Nov 28, 2012 at 11:36 AM

sir how much po kaya ito?

900 pesos....+ freight cost.

ndotcom · « **Reply #37 on:** Dec 19, 2012 at 11:17 AM »

Quote from: Abad Santos 7 on Dec 19, 2012 at 09:52 AM

900 pesos....+ freight cost.

sir ano dimensions nyan? thanks...

Abad Santos 7 · « **Reply #38 on:** Dec 19, 2012 at 06:46 PM »

The dimension is 21.2 X 70 X 25.7cm.

BTW, Just to clarify Im not selling this, just giving information about some case
available in my place.

Cheers.

delinsk · « **Reply #39 on:** Jan 04, 2013 at 02:12 PM »

just bought one from sir abad santos (loi) for my kt120 and its very nice well built.....

whirlpool · « **Reply #40 on:** Jan 10, 2013 at 09:50 PM »

Quote from: Abad Santos 7 on Dec 19, 2012 at 06:46 PM

The dimension is 21.2 X 70 X 25.7cm.

BTW, Just to clarify Im not selling this, just giving information about some case
available in my place.

Cheers.

Quote from: delinsk on Jan 04, 2013 at 02:12 PM

just bought one from sir abad santos (loi) for my kt120 and its very nice well built.....

Saan o paano po ba ako makabili ng aluminum casing. Ilipat ko sana dito ang two mono blocks power amp ko with big transformers made by Marco Pilyo. Thanks.

Abad Santos 7 · « **Reply #41 on:** Jan 15, 2013 at 09:03 PM »

If you are into DIY and not in hurry...maybe I can help you...

PM me your requirement.

Cheers.

whirlpool · « **Reply #42 on:** Jan 18, 2013 at 10:35 PM »

Quote from: Abad Santos 7 on Jan 15, 2013 at 09:03 PM

If you are into DIY and not in hurry...maybe I can help you...

PM me your requirement.

Cheers.

You got PM sir

Abad Santos 7 · « **Reply #43 on:** Jan 20, 2013 at 03:25 PM »

DIY ALUMINUM CASE:

DIMENSION = 48cm X 48cm X 19cm
WEIGHT = 17Kg

This is intended for my current CLASS A Power Amp DIY Project.

FONT PANEL:

INTERNAL PART:

BACK VIEW:

HEAT SINK:

forseti · « **Reply #44 on:** Jan 20, 2013 at 03:42 PM »

Parang Accuphase Loi

ATJr. · « **Reply #45 on:** Jan 20, 2013 at 04:01 PM »

wow.....awesome.....

like......

adrianm · « **Reply #46 on:** Jan 21, 2013 at 11:44 AM »

wow, very nice. magkano po kuha nyo?

JojoD818 · « **Reply #47 on:** Jan 21, 2013 at 03:22 PM »

love the VU meters! pwede Honey Badger diyan ah....

ATJr. · « **Reply #48 on:** Jan 21, 2013 at 03:33 PM »

sana standard 3/4 inch spacing yung 5way speaker post para pwede yung ibang designer jacks....

Ron_21 · « **Reply #49 on:** Jan 21, 2013 at 05:36 PM »

how much?

plus shipping.

thanks

Abad Santos 7 · « **Reply #50 on:** Jan 21, 2013 at 07:53 PM »

For the price...just a guestimate

lets say 700~1000 per kilo include na shipping cost
kung group buy.

Sa shipping cost depende sa volume - kung group buy mas mura hati-hati lang...
Pero kung mag isa..medyo mahal ang aabutin...hindi na practical bumili dito.

If you are into Class AB SS - Hindi na kailangan ung ganitong case... may mas mura pa.

Pero kung Class A project - minimum na siguro ito..with 50W Class A.

But if you are into more than 100W Class A- meron dito available 30~40Kg per monoblock.

Baka may magtanong bakit per kilo ang pricing: Un lang ang nakita kong pattern, ung design sa
faceplate lang magkakaiba pero sa main heatsink pare-pareho lang.

Cheers.

Abad Santos 7 · « **Reply #51 on:** Jan 21, 2013 at 07:57 PM »

Quote from: TonyT on Jan 21, 2013 at 03:33 PM

sana standard 3/4 inch spacing yung 5way speaker post para pwede yung ibang designer jacks....

Sir Tony,

Pede naman yatang huwag ng pabutasan ung likod. Ung kay Leslie walang butas lahat un sya
na lang ang bumutas.

Cheers.

Abad Santos 7 · « **Reply #52 on:** Jan 21, 2013 at 09:49 PM »

Disassembled Parts:

Pag Buo Na:

JojoD818 · « **Reply #53 on:** Jan 22, 2013 at 06:39 AM »

mga ilan Kilos yan ganyan sir?

the one with the VU, does it come in black? it is 17Kgs yes?

Weng! · « **Reply #54 on:** Jan 22, 2013 at 07:10 AM »

bought this casing from ATI Research in bangkok for an equivalent of 1400 pesos. the chassis is an anodized aluminum. unfortunately nagsara na ang production line nila long time ago at pinakyaw ang stocks nila by a european who's from diyaudio (ata).

i am also looking for a casing so i can put my charlize class D amp + SMPS.

sana may group buy ng casing dito.

JojoD818 · « **Reply #55 on:** Jan 22, 2013 at 07:12 AM »

ayan group buy na!

Weng! · « **Reply #56 on:** Jan 22, 2013 at 07:26 AM »

Quote from: JojoD818 on Jan 22, 2013 at 07:12 AM

ayan group buy na!

bro jojo, dito ko nilipat ang tube buffer mo.

gusto ko ilipat din ang class D amp sa aluminum casing para uniform tingnan. di kasi bagay ang kahoy na faceplate sa amp.

Abad Santos 7 · « **Reply #57 on:** Jan 22, 2013 at 08:29 AM »

Quote from: JojoD818 on Jan 22, 2013 at 06:39 AM

mga ilan Kilos yan ganyan sir?

the one with the VU, does it come in black? it is 17Kgs yes?

Sir Jojo,

Ung white faceplate i think a less than 5Kg lang yata....

Ung Gold Faceplate, yes its 17Kg. This design gold lang ung nakita ko but
if you want black marami naman choices.

Cheers.

Ron_21 · « **Reply #58 on:** Jan 22, 2013 at 09:30 AM »

magkano kaya tatamaan ng isa

JojoD818 · « **Reply #59 on:** Jan 22, 2013 at 02:36 PM »

Quote from: Abad Santos 7 on Jan 22, 2013 at 08:29 AM

Sir Jojo,

Ung white faceplate i think a less than 5Kg lang yata....

Ung Gold Faceplate, yes its 17Kg. This design gold lang ung nakita ko but
if you want black marami naman choices.

Cheers.

Sir,

I think the 5Kg one would be more practical. I'd love the one with the VU but I reckon it's gonna be expensive.

Plus let's see if we can make a group buy para lahat masaya! What do you say guys? Pili pili na!

Quote from: Abad Santos 7 on Jan 21, 2013 at 09:49 PM

Disassembled Parts:

Pag Buo Na:

Sir is this the 5KG yes? Can we please have the dimensions?