Author Topic: MarkAudio Extended Full Range drivers - Post your build here (Read 285520 times)

JoeyGS · « **Reply #480 on:** Mar 22, 2014 at 12:14 PM »

Napaka academic naman yang mga insect na yan....

Quote from: timber715 on Mar 22, 2014 at 12:03 AM

Alam nung dumapo kung kanino yung speakers...after landing sinulat nya letter "J"... Tapos yung barkada nya naman yung tuldok sa taas ng J.... Huhuhu

edrel sison · « **Reply #481 on:** Mar 22, 2014 at 12:16 PM »

i will joey. let me know when is your next session.

deist · « **Reply #482 on:** Mar 23, 2014 at 09:42 AM »

Most likely mid to end of April, isisingit lang sa sked pangtanggal ng stress (or pampadagdag

).

Quote from: edrel sison on Mar 22, 2014 at 08:55 AM

nice meeting you deist! you should be able to complete the build mid april i suppose.

deist · « **Reply #483 on:** Mar 23, 2014 at 09:48 AM »

Pasyal kayo Sta. Rosa,marami-raming pit stop dito. JoeyGS audio room alone worth the travel na

Quote from: Gino on Mar 22, 2014 at 12:14 PM

I do too. I will be watching this build. Edrel-Deist-Timber collaboration. Wow. Did I miss anybody?

Quote from: edrel sison on Mar 22, 2014 at 12:09 PM

thanks Gino. i hope to hear them one of these days on deist's place match with his alpairs.

Gino · « **Reply #484 on:** Mar 23, 2014 at 01:27 PM »

How far are you guys from Nuvali?

JojoD818 · « **Reply #485 on:** Mar 23, 2014 at 10:06 PM »

Quote from: JoeyGS on Mar 21, 2014 at 11:36 PM

If i know mas preferred mo ma-delay para may lechon! Call ako diyan ha...... Promise!

Yun yun eh!

Quote from: timber715 on Mar 22, 2014 at 12:03 AM

Alam nung dumapo kung kanino yung speakers...after landing sinulat nya letter "J"... Tapos yung barkada nya naman yung tuldok sa taas ng J.... Huhuhu

Ah mga vandal insects yan Timbs! May mga ganyan na din ako na-experience dati, ang ginawa ko pinabayaan ko lang sila para mabuo yun pangalan na sinusulat... tapos nilagyan ko ng tsek!

Quote from: Gino on Mar 22, 2014 at 10:23 AM

Those are really delicious irons you made Edrel. Ang kikinis.

Si Edrel pa, automatic na yan.

Quote from: Gino on Mar 22, 2014 at 12:14 PM

I do too. I will be watching this build. Edrel-Deist-Timber collaboration. Wow. Did I miss anybody?

You forgot the insects bro!

Tamang kulit ako ah...

timber715 · « **Reply #486 on:** Mar 23, 2014 at 10:20 PM »

Aba, malapit na pala birthday ah...... Lechon time na!

deist · « **Reply #487 on:** Mar 24, 2014 at 08:56 AM »

Our house is 5 minute drive from NuVali, halos ganun din sa case ni JoeyGS.

Quote from: Gino on Mar 23, 2014 at 01:27 PM

How far are you guys from Nuvali?

Yes, crucial ang role ng insects

Quote from: JojoD818 on Mar 23, 2014 at 10:06 PM

You forgot the insects bro!

timber715 · « **Reply #488 on:** Mar 24, 2014 at 11:28 PM »

Got the chance to start sanding, polishing and cleaning the enclosures.

Di na makakalanding mga insects dito.

Then started cutting some mahogany for the base.

The short piece gets reduced

Then it is split in half.

With a day of rain, it stops me from doing anything else...

Gino · « **Reply #489 on:** Mar 25, 2014 at 09:50 AM »

Mind boggling. How do you split a board that is relatively thin?

JojoD818 · « **Reply #490 on:** Mar 25, 2014 at 12:36 PM »

Quote from: timber715 on Mar 24, 2014 at 11:28 PM

With a day of rain, it stops me from doing anything else...

Sabi ko na kasi eh! Kung hindi insects, rain naman ang magpapatagal sa finishing...

Nakasimangot na siguro si brader JoeyGS hahaha!

Quote from: Gino on Mar 25, 2014 at 09:50 AM

Mind boggling. How do you split a board that is relatively thin?

Antay natin sagot bro, dati kasi tinanong ko yan ang sagot sa akin "so many ways to skin a cat" eh kahoy ang tinatanong ko di naman pusa...

PS: Sensiya na ayaw pa maubos ng kulit ko...

timber715 · « **Reply #491 on:** Mar 25, 2014 at 01:38 PM »

Quote from: Gino on Mar 25, 2014 at 09:50 AM

Mind boggling. How do you split a board that is relatively thin?

With a bandsaw brader...
http://youtu.be/DQLmHrQ71Gw

Gino · « **Reply #492 on:** Mar 25, 2014 at 01:58 PM »

That is some serious machine.

timber715 · « **Reply #493 on:** Mar 25, 2014 at 02:08 PM »

Quote from: Gino on Mar 25, 2014 at 01:58 PM

That is some serious machine.

Seriously expensive... Huhuhu. But a very nice tool to have indeed.

timber715 · « **Reply #494 on:** Mar 25, 2014 at 07:40 PM »

Finally the rain abated... Time to resume what can be done.
The long board goes in

Then comes out

All boards went in including the short ones, which was cut to close to the shape of the speaker and then fastened using 4 screws.

I then added tape to prevent any scratches from happening as the flush trim router bit hits the sides.

Trimed and rounded over, it gets waxed and reinstalled.

Waiting for the feet then it gets delivered... Picked up pala. Heheheh

JoeyGS · « **Reply #495 on:** Mar 25, 2014 at 09:47 PM »

Malapit naaaaaaaa.....

timber715 · « **Reply #496 on:** Mar 27, 2014 at 12:09 AM »

Got the feet squared, shaped and waxed and then installed...

Adding the last pieces...

Ready for pick up na!

JoeyGS · « **Reply #497 on:** Mar 27, 2014 at 04:51 AM »

Great build from our Master Carpenter! Thanks timber!

Hope you have your signature in there ....... Can't wait to pick it up.

Gino · « **Reply #498 on:** Mar 27, 2014 at 02:04 PM »

Bow to the master.

deist · « **Reply #499 on:** Mar 28, 2014 at 08:26 AM »

nice plinths, eksakto lang ang size JoeyGS

Narayan · « **Reply #500 on:** Mar 28, 2014 at 08:54 AM »

Very nice build.

Congrats to both owner and builder.

luis · « **Reply #501 on:** Mar 28, 2014 at 10:26 AM »

Quote from: timber715 on Mar 25, 2014 at 07:40 PM

Finally the rain abated... Time to resume what can be done.
The long board goes in

Then comes out

All boards went in including the short ones, which was cut to close to the shape of the speaker and then fastened using 4 screws.

I then added tape to prevent any scratches from happening as the flush trim router bit hits the sides.

Trimed and rounded over, it gets waxed and reinstalled.

Waiting for the feet then it gets delivered... Picked up pala. Heheheh

wow parang white chocolate with caramel on the edge. ang ganda, ang sarap tignan!

joya · « **Reply #502 on:** Mar 28, 2014 at 10:49 AM »

Quote from: JoeyGS on Mar 27, 2014 at 04:51 AM

Great build from our Master Carpenter! Thanks timber!

Hope you have your signature in there ....... Can't wait to pick it up.

Congrats, tukayo, drooling to hear them sing...

JoeyGS · « **Reply #503 on:** Mar 28, 2014 at 12:49 PM »

Deist and Narayan ..... Thanks

JoeyGS · « **Reply #504 on:** Mar 28, 2014 at 12:50 PM »

Luis ..... That's a sweet way of putting it ...

JoeyGS · « **Reply #505 on:** Mar 28, 2014 at 12:51 PM »

O taga saan ka ba tukayo?

Quote from: joya on Mar 28, 2014 at 10:49 AM

Congrats, tukayo, drooling to hear them sing...

timber715 · « **Reply #506 on:** Mar 28, 2014 at 01:02 PM »

Walang pictures?

Gino · « **Reply #507 on:** Mar 28, 2014 at 01:30 PM »

Aba napickup na.

JoeyGS · « **Reply #508 on:** Mar 28, 2014 at 02:13 PM »

Eh pareho lang naman ..... at di pa naassemble eh .......

At home ......

Quote from: timber715 on Mar 28, 2014 at 01:02 PM

Walang pictures?

Quote from: Gino on Mar 28, 2014 at 01:30 PM

Aba napickup na.

joya · « **Reply #509 on:** Mar 28, 2014 at 09:12 PM »

Quote from: JoeyGS on Mar 28, 2014 at 12:51 PM

O taga saan ka ba tukayo?

Been to your place years ago brader, got the souped-up A50t, pero nakulam ni brader Cal, in short, sold it for brader Jojo's mono amps & LS (...lucky for us to own one). Maybe one of these days Jojo, Cal & I can hear your wonderful pair in action...