Topic: LED 86C HTP Projector

[qguy]

The best right now is Led86+ at 10,999....

1.The brightness may not be enough in a bright setting.
2. It has no zoom, so placement may be an issue as you need to move the projector closer/farther to get the desired screen size. 
3. ideally, the projector should be dead center from the screen in terms of height, not recommended yung naka tilt yung projector upwards or downwards.


for a 90 inch screen. my projector is 110 inches away from the screen. 

[LouPah]

The best right now is Led86+ at 10,999....

1.The brightness may not be enough in a bright setting.
2. It has no zoom, so placement may be an issue as you need to move the projector closer/farther to get the desired screen size. 
3. ideally, the projector should be dead center from the screen in terms of height, not recommended yung naka tilt yung projector upwards or downwards.


for a 90 inch screen. my projector is 110 inches away from the screen. 

Plus one here!!!

[crazyhog]

LED 86/+ wala bang keystone?


Sent from my iPhone using Tapatalk

[DPT]

LED 86/+ wala bang keystone?


Sent from my iPhone using Tapatalk

Manual keystone. EG tilting the glass.

[LouPah]

LED 86/+ wala bang keystone?

Mayron nman, kaya lang cgurado ako na hindi mo magagamit dahil lalabo ang image. Kailangan dead center ang set-up mo between projector and screen.

[espionage]

Hello guys need your advise. Which is best buy, Unic LED86+ 2800Lumens = ₱ 10,999.00 or Unic LED86 2700 Lumens + M8S Amlogic S812 4K Mini Smart Android TV Box = ₱ 9,999.00 + ₱ 2,699.00 = ₱ 12,698.00. Thanks in advance

[LouPah]

AFAIK, Led 86+ has a built-in Android system, so price wise this would be the best buy. But for me I don't like a projector with android integration. Paano pag nagha-hung yong android? damay pati projector mo!

I have Led 86 with MXIII Android 4.4, Amlogic S802 2.0GHz Quad core, Octa-Core Mali-450 GPU. Kodi is already pre-installed and updated to the latest Jarvis version. I think same specs with  M8S Amlogic S812 4K Mini Smart Android TV Box.

So if the use of the projector is stationary, I opted with the second choice, but if you plan to use the projector from one place to another, better choose Led 86+ since you won't need any external player coz it's already an android projector. But still the final choice is yours. Good luck... 

[espionage]

Thanks a lot Sir LouPah 

[kontador]

 

[mightbeyou]

AFAIK, Led 86+ has a built-in Android system, so price wise this would be the best buy. But for me I don't like a projector with android integration. Paano pag nagha-hung yong android? damay pati projector mo!

I have Led 86 with MXIII Android 4.4, Amlogic S802 2.0GHz Quad core, Octa-Core Mali-450 GPU. Kodi is already pre-installed and updated to the latest Jarvis version. I think same specs with  M8S Amlogic S812 4K Mini Smart Android TV Box.

So if the use of the projector is stationary, I opted with the second choice, but if you plan to use the projector from one place to another, better choose Led 86+ since you won't need any external player coz it's already an android projector. But still the final choice is yours. Good luck... 

sir, is there any local distributor for this.. thanks..

Sent from my SM-J700F using Tapatalk

[kontador]

sir, is there any local distributor for this.. thanks..

Sent from my SM-J700F using Tapatalk

meron ata dati sa lazada try mong mag search

[LouPah]

 

Great screen shots! Ano ang movie source and player ang gamit mo bro?

[LouPah]

sir, is there any local distributor for this.. thanks..

Sent from my SM-J700F using Tapatalk

Now available at Lazada.....http://www.lazada.com.ph/unic-led86-2700-lumens-portable-projector-white-1258543.html

[mightbeyou]

[quote name="mightbeyou" post=2389477 timestamp=1461943322]
sir, is there any local distributor for this.. thanks..

Sent from my SM-J700F using Tapatalk


[/quote]

Now available at Lazada.....http://www.lazada.com.ph/unic-led86-2700-lumens-portable-projector-white-1258543.html

sorry sir just another query.. i know from the nomenclature itself 86+ and 86 are different.. but is that already a significant difference in case i opt to purchase the one from lazada which is 86 only.. thanks..

Sent from my SM-J700F using Tapatalk

[kontador]

Great screen shots! Ano ang movie source and player ang gamit mo bro?


Measy Media Player(NMT), bluray rip 1080p

[LouPah]

Got the Unic UC50 DLP Micro projector, nakkwotan lang ako sa sobrang liit neto. UC50 has advertised as 800 lumens (50 ANSI), and only has 854x480 resolution, palm size. I was able to compare it with my huge LED86C. Look what happened.....https://youtu.be/oGGi80CmsCE

[swensonb]

good day my fellow LED86 users
its been a while and ask ko lang kung nagkaron naba ng alikabok sa loob ng screen ng pj nyo and kung may guide kung pano linisin at i maintain ? yung sakin kasi meron na sa bandang sulok konti pa lang naman

regards
swensonb

[LouPah]

good day my fellow LED86 users
its been a while and ask ko lang kung nagkaron naba ng alikabok sa loob ng screen ng pj nyo and kung may guide kung pano linisin at i maintain ? yung sakin kasi meron na sa bandang sulok konti pa lang naman

regards
swensonb

It's different model but this is an LCD projector and similar to our LED86. Hope will help.   https://youtu.be/Gr-9E0_3MnA 

[roamantiko]

gud pm po. may question lang ako,

kung walang keystone ang projector, wala naman issue kung hindi dead center naka tutok ang projector sa screen? para walang issue sa focus? like naka mount sa ceiling, or wall mount which is hindi naman dead center ang project sa screen. correct me if I'm wrong..

[LouPah]

Kung walang keystone ang projector, wala nmang issue basta you are clever enough to position between projector and screen. Kailangan talaga naka-dead center ang lens ng projector sa screen, kc kung hindi, magging trapezoid yung image output mo, at very distracting yon kung mannood ka.
Sa totoo lang itong Led86 ay mayrong keystone kuno, pro useless lang kc mapihit mo lang ng konti blur na ung image either top or bottom so the tendency is kailangan naka-dead center parin ito.

[aRujoN]

Which of the two models has a certified higher lumens rating? LED86 or RD806?  Is the rd806 3500 lumens rating accurate?

[roamantiko]

Kung walang keystone ang projector, wala nmang issue basta you are clever enough to position between projector and screen. Kailangan talaga naka-dead center ang lens ng projector sa screen, kc kung hindi, magging trapezoid yung image output mo, at very distracting yon kung mannood ka.
Sa totoo lang itong Led86 ay mayrong keystone kuno, pro useless lang kc mapihit mo lang ng konti blur na ung image either top or bottom so the tendency is kailangan naka-dead center parin ito.

ah okay, so mahirap pala kung walang way to set it dead center, kasi plano ko bumili para ilagay sa master's bedroom namen, eh kung deadcenter, eh di parang nasa same height ko yung projector kung nakaupo sa kama.  haha..

so kung uc46 ang bilin ko, since may keystone correction yun, wala akong issue kung I-wall mount ko na malapit na sa ceiling?

[LouPah]

Which of the two models has a certified higher lumens rating? LED86 or RD806?  Is the rd806 3500 lumens rating accurate?

I can't say nothing about RD806 since I don't owned it. The only way to measure the accuracy of a lumen ratings of a projector is to measure it, but who cares? All manufacturers including branded projectors are able to exaggerate their given lumen ratings. Now back to your question on which has a certified higher lumens? I think its RD806 with 3500 lumens, Led86 has only 2800 lumens according to the specs. given. But I find my Led86 is bright enough for my needs, remember not always the brighter is best, in terms of projector's picture quality.

[LouPah]

I can't say nothing about RD806 since I don't owned it. The only way to measure the accuracy of a lumen ratings of a projector is to measure it, but who cares? All manufacturers including branded projectors are able to exaggerate their given lumen ratings. Now back to your question on which has a certified higher lumens? I think its RD806 with 3500 lumens, Led86 has only 2800 lumens according to the specs. given. But I find my Led86 is bright enough for my needs, remember not always the brighter is best, in terms of projector's picture quality.

ah okay, so mahirap pala kung walang way to set it dead center, kasi plano ko bumili para ilagay sa master's bedroom namen, eh kung deadcenter, eh di parang nasa same height ko yung projector kung nakaupo sa kama.  haha..

so kung uc46 ang bilin ko, since may keystone correction yun, wala akong issue kung I-wall mount ko na malapit na sa ceiling?

Yes, tama ko dyan. Mukhang marami din nman happy sa performance ng uc46. Kung wala nga l;ang akong Led86 ito na bbilhin ko eh, but since mayron na I opted with Uc50 pra ma-try ko rin nman ang dlp projector.

[roamantiko]

Yes, tama ko dyan. Mukhang marami din nman happy sa performance ng uc46. Kung wala nga l;ang akong Led86 ito na bbilhin ko eh, but since mayron na I opted with Uc50 pra ma-try ko rin nman ang dlp projector.

ah okay, naka-order na ko ng UC46 last Saturday and dumating kahapon. not expecting too much on this projector pero sobrang not bad na yung performance for the price. may issue lang ako, kasi may dumi na nakikita sa pag-project ng image.. so mukhang kelangan kong buksan para linisin. pero intayin ko na lang yung 7days bago ko buksan. sobrang laking tulong din ng wifi ready ng unit.

normal bang medyo blurred yung corners at pag maliwanag ang scene sobrang wash out? ngayon kasi naka project lang sa white wall not sure kung dahil dun kaya ganun, magDDIY pa lang ako ng screen.

sorry to hi-jack this thread. pero I'm looking forward to upgrade soon with LED86.   

[LouPah]

ah okay, naka-order na ko ng UC46 last Saturday and dumating kahapon. not expecting too much on this projector pero sobrang not bad na yung performance for the price. may issue lang ako, kasi may dumi na nakikita sa pag-project ng image.. so mukhang kelangan kong buksan para linisin. pero intayin ko na lang yung 7days bago ko buksan. sobrang laking tulong din ng wifi ready ng unit.

normal bang medyo blurred yung corners at pag maliwanag ang scene sobrang wash out? ngayon kasi naka project lang sa white wall not sure kung dahil dun kaya ganun, magDDIY pa lang ako ng screen.

sorry to hi-jack this thread. pero I'm looking forward to upgrade soon with LED86.   

Yes! that is normal for a cheap lcd projector because of the plastic lens they're using, instead of glass lens. Also one reason is maybe you are using the keystone. Try keystone dial into zero and project dead center of the screen.
Hindi talaga maganda and factory picture settings ng maga ito, Kalikutin mo picture settings sa user's mode, lower or higher the brightness, contrast, sharpness and color, with your own liking. Kung white wall ang gamit mo ngayun, konti lang ang difference yan sa totong ordinary projector screen.

[roamantiko]

Yes! that is normal for a cheap lcd projector because of the plastic lens they're using, instead of glass lens. Also one reason is maybe you are using the keystone. Try keystone dial into zero and project dead center of the screen.
Hindi talaga maganda and factory picture settings ng maga ito, Kalikutin mo picture settings sa user's mode, lower or higher the brightness, contrast, sharpness and color, with your own liking. Kung white wall ang gamit mo ngayun, konti lang ang difference yan sa totong ordinary projector screen.

ah okay, thanks sir lou.. yup, napansin ko nga sa pagkalikot ng keystone napalinaw kahit papano yung corners. mukhang kahit may keystone eh bali wala kasi nagiging blurred lang yung corners so dead center parin ang bato dapat sa screen. kaya pag nagupgrade ako to led86 eh no problem kahit walang keystone.

at ginamitan ko din ng calibration galing youtube kaya natimpla ko ng swak na swak sa gusto ko, at talagang natuwa na ko sa bato ng kulay. laking bagay talaga ng wifi niya for wireless connection from phone.

naka white wall din kame, iniisip ko kung kukulayan ko ng gray tapos lalagyan ng border na black felt paper, malaking bagay ba natutulong ng black border?

[LouPah]

Black border is a must talaga for a screen. Pero dapat talaga dark paint wall ang environment mo tapos white screen lang ang nakalitaw para to improve the contrast of the projected image, pero if no other way to paint darker your environment, lagyan mo nlang ng black border. I've already tried light gray paint, pero di ko cya type kc dumidilim ang image, Yes gumaganda ang contrast but I don't like the overall image quality. Pero try mo din kanya-kanya nman tau ng taste dba?

By the way, Led86 has also a keystone but same with your uc46 na useless nga, kc konting pihit lang blur na ung image. Ang walang keystone ay ang UC50 pero perfect ung focus nya for the entire screen. Kaya ng mas gusto ko image quality ng UC50 kaysa led86 ko eh...

[roamantiko]

iniisip ko din mag DIY ng BOC, mukhang mas maganda ang output nun kesa sa white wall or plywood.

ay ganun? so kahit parehong deadcenter ang tutok ng led86 at uc50, mas maganda pa rin ang quality ni uc50? kahit 720p na yung native reso ng led86?

[LouPah]

ay ganun? so kahit parehong deadcenter ang tutok ng led86 at uc50, mas maganda pa rin ang quality ni uc50? kahit 720p na yung native reso ng led86?

Tompak! hinde washout ang image ng uc50 mas maganda kc contrast at mas intense ang color brightness dahil nga dlp ito. Ang Led86 is more brighter but bright in terms of white color only, kaya nagging wash-out ang image output nya. In bright environment tapos hd video source mo, talo ang uc50, but in dark environment halos same lang ang brightness ng dalawa, but you have to consider also the image size, syempre si uc50 is only 800 lumens, you can't go bigger than 60" image size. Led86 is 2800 lumens, you can go up to 120 image size.

I made a video comparison between uc50 & led86....https://youtu.be/oGGi80CmsCE