Author Topic: Need help in connecting pb1000 to htib.... (Read 11043 times)

bongchillog · « **Reply #30 on:** Sep 15, 2015 at 11:17 AM »

Thanks po markrenz
Subukan ko din na ipalit nalang ang pb1000
Or splicing muna para mapakinggan ko kung ano mas ok

qguy · « **Reply #31 on:** Sep 15, 2015 at 02:42 PM »

yeah, madali na mag test ng with or without the HTIB "subwoofer"

Quote from: markcrenz on Sep 15, 2015 at 11:01 AM

I don't think you would lose the upper bass response, kayang-kaya ng pb1000 yun with its 10" driver. Keeping the passive woofer (you're right q, htib's have woofers, those pathetic boxes cannot subwoof!) might present more problems with upper bass boom or cancellation.

Sabagay madali lang i-test which is better, just splice a length of wire para ikabit sa pb1000, then listen with and without the passive woofer.

bongchillog · « **Reply #32 on:** Sep 15, 2015 at 08:41 PM »

Quote from: qguy on Sep 15, 2015 at 02:42 PM

yeah, madali na mag test ng with or without the HTIB "subwoofer"

Ok..

Meron bang nabibiling parang box or y connector na may female plug with banana type?
para putol na lang then connected with banana connectors para hinidi panget tingnan ang splice...

markcrenz · « **Reply #33 on:** Sep 16, 2015 at 08:14 AM »

Please post a diagram ng planned connections mo.

bongchillog · « **Reply #34 on:** Sep 16, 2015 at 04:39 PM »

Quote from: markcrenz on Sep 16, 2015 at 08:14 AM

Please post a diagram ng planned connections mo.

Ganito sir

sorry for the pic, madalian lang

but as per qguy rca ang madaling hanapan ng y connector..
kaya baka rca na lang bilhin ko, unless may available na ganyan on banana plug sana

markcrenz · « **Reply #35 on:** Sep 16, 2015 at 06:48 PM »

hanap ka na lang ng banana plugs na pwede piggyback. simpler and reusable pa.

bongchillog · « **Reply #36 on:** Sep 16, 2015 at 07:58 PM »

Quote from: markcrenz on Sep 16, 2015 at 06:48 PM

hanap ka na lang ng banana plugs na pwede piggyback. simpler and reusable pa.

sana makahanap ako ng ganito..

thanks sir marcrenz

Nelson de Leon · « **Reply #37 on:** Sep 16, 2015 at 08:00 PM »

Quote from: markcrenz on Sep 16, 2015 at 06:48 PM

hanap ka na lang ng banana plugs na pwede piggyback. simpler and reusable pa.

Parang may for sale ka nito ah!

bongchillog · « **Reply #38 on:** Sep 16, 2015 at 08:08 PM »

may nabibili po ba?

at kanino sir nelson?

mas ok yong lower image para iwas short

Nelson de Leon · « **Reply #39 on:** Sep 16, 2015 at 08:56 PM »

Quote from: bongchillog on Sep 16, 2015 at 08:08 PM

may nabibili po ba?

at kanino sir nelson?

mas ok yong lower image para iwas short

Alam ko sir si Don King Markcrenz may for sale na ganyan. Yun nasa lower picture is ok provided na kasukat ng width ng terminals yun banana plugs niyo.

bongchillog · « **Reply #40 on:** Sep 16, 2015 at 10:45 PM »

Ok will pm

qguy · « **Reply #41 on:** Sep 17, 2015 at 06:24 AM »

You would need 6 of these if your using banana plugs.

markcrenz · « **Reply #42 on:** Sep 17, 2015 at 07:52 AM »

Quote from: Nelson de Leon on Sep 16, 2015 at 08:00 PM

Parang may for sale ka nito ah!

Wala, kung mayroon I would have offered it immediately. DEECO sells it, looks like the 2nd pic.

Quote from: qguy on Sep 17, 2015 at 06:24 AM

You would need 6 of these if your using banana plugs.

Oo nga 6 of that plus housing pa for temporary use lang nakakapanghinayang.

Nelson de Leon · « **Reply #43 on:** Sep 17, 2015 at 07:57 AM »

Hardwire niyo muna. Then kung talagang ok, dun na lang lagyan ng splitter. I'm sure yun TS would prefer without the HTiB sub as long as he runs his PB1000 na walang cut-off, following the xover of the HTiB.

bongchillog · « **Reply #44 on:** Sep 17, 2015 at 11:49 AM »

Thanks sa suggestio. Sir nelson...
Try ko din hardwire muna..

I'll just need two pairs of piggy tail...

Cut the wire then put banana type with piggy tail - htib end
Another end with banana wire - htib sub end

Htib end to pb1000 - first pair
Htib sub end to pb1000 piggy back - 2nd pair

markcrenz · « **Reply #45 on:** Sep 17, 2015 at 03:10 PM »

Bro if you had just snipped the wires off the passive woofer and connected it to the PB1000 you would have been spending time enjoying it na.

qguy · « **Reply #46 on:** Sep 17, 2015 at 04:46 PM »

LIKE

Quote from: markcrenz on Sep 17, 2015 at 03:10 PM

Bro if you had just snipped the wires off the passive woofer and connected it to the PB1000 you would have been spending time enjoying it na.

qguy · « **Reply #47 on:** Sep 17, 2015 at 04:48 PM »

5 days na ub, ako di ko kaya yan, di ko matitiis, pipilitin ko kabit in 5 minutes hehehehehe

bongchillog · « **Reply #48 on:** Sep 17, 2015 at 05:44 PM »

Final na kasi gusto ko para pulido agad ang gawa hehe..
makakahintay naman ako..

Already ordered open type banana connector
piggy back type. meron pala is anya..

will post pics pag ok na

bongchillog · « **Reply #49 on:** Sep 21, 2015 at 08:22 PM »

the banana plugs

piggy back

sounds great with 2 subs

ano ba dapat settings ng low pass filter ng pb1000?

qguy · « **Reply #50 on:** Sep 21, 2015 at 10:51 PM »

Medjo dangerous yung piggy back, baka mag dikit na yan, If I were you, direct mo na yung speaker wire sa terminal ng SVS subwoofer or just use one set of banana plugs.

As for the crossover setting, experiment, start with the lowest setting and adjust to taste.

bongchillog · « **Reply #51 on:** Sep 22, 2015 at 01:39 AM »

I like the piggy back...
Neat na neat tingnan...

Im planning to insulate it nalang or at least hindi naka piggy back sa likod ng pb1000
Ill just another pair nalang.

Nakuha ko na desired level ng lpf

Around 8:30oclock settings..

Nelson de Leon · « **Reply #52 on:** Sep 22, 2015 at 02:06 AM »

May sariling xover setting ata ang sub output ng HTiB pero you can still adjust to taste or preference.

bongchillog · « **Reply #53 on:** Sep 22, 2015 at 02:15 AM »

Quote from: Nelson de Leon on Sep 22, 2015 at 02:06 AM

May sariling xover setting ata ang sub output ng HTiB pero you can still adjust to taste or preference.

Wala syang sariling crossoever settings sir.
Parang volume lang..

Pero ang laki talaga ng ginanda ng setup lalo may 3d sound mode sya.
Sobrang baba ng bass response

Nelson de Leon · « **Reply #54 on:** Sep 22, 2015 at 02:19 AM »

Quote from: bongchillog on Sep 22, 2015 at 02:15 AM

Wala syang sariling crossoever settings sir.
Parang volume lang..

Pero ang laki talaga ng ginanda ng setup lalo may 3d sound mode sya.
Sobrang baba ng bass response

I think meron yan sir built-in, otherwise may mga voices etc na lalabas sa HTiB sub.

bongchillog · « **Reply #55 on:** Sep 22, 2015 at 11:33 AM »

Ah ok sir... Fixed siguro..
Non adjustable sya...

bongchillog · « **Reply #56 on:** Sep 23, 2015 at 04:16 PM »

Succesfully insulated the banana plugs via shrink tube..

Question:
if i use wireless sublink like this

http://www.amazon.com/Dayton-Audio-WS-12-Transmitter-Subwoofers/dp/B00A4V22G0/ref=cm_cr_pr_product_top?ie=UTF8

Can i use LFE in in the sub? since the amplification of the line is already filtered?
it is also available locally..

Nelson de Leon · « **Reply #57 on:** Sep 23, 2015 at 05:09 PM »

Quote from: bongchillog on Sep 23, 2015 at 04:16 PM

Succesfully insulated the banana plugs via shrink tube..

Question:
if i use wireless sublink like this

http://www.amazon.com/Dayton-Audio-WS-12-Transmitter-Subwoofers/dp/B00A4V22G0/ref=cm_cr_pr_product_top?ie=UTF8

Can i use LFE in in the sub? since the amplification of the line is already filtered?
it is also available locally..

I think so sir. Link lang naman yan. Pero may wires ka pa din na gagamitin. Yun power cables mo. It will only lessen the wires pero hindi siya eliminated.

bongchillog · « **Reply #58 on:** Sep 23, 2015 at 06:27 PM »

Quote from: Nelson de Leon on Sep 23, 2015 at 05:09 PM

I think so sir. Link lang naman yan. Pero may wires ka pa din na gagamitin. Yun power cables mo. It will only lessen the wires pero hindi siya eliminated.

Ok sir..
thanks po.
pag isipan ko muna connection.
Gusto ko ilagay sa gilid ng sofa. tamang tama may saksakan. bilhan ko na lang ng sariling servo avr