Topic: 110v avr na plug sa 220v

[lest3rang]

guys ano kaya na damage ng avr ko my tauhan accidentally plug it in 220v outlet at umusok ung avr ko... sobrang excited kc ayun nag ka mali2x na ng saksak....sana may maka help thanks!

[CoolTOYZPH]

Time to contact markcrenz http://www.pinoydvd.com/index.php?action=profile;u=21515

[lest3rang]

heheh ang problema papa ship nanaman...

[lest3rang]

i replaced the broken capacitor and may pumipitik lang... nag on cya briefly then pitik then namamatay cya... ano kaya problema pa

[Nelson de Leon]

Baka relay lang yun pumipitik.

[tony]

picturan mo para makapag comment ako...

[lest3rang]

uu ung relay lang pumipitik... it will turn on for about a sec then will turn off... ok sir will post pic of the avr asap... thanks

[cyberdraven]

boss, sorry to threadjack pero me konting tanong lang po:

1.  Me mga nakikita akong 100V at 110V na amps.  Is it ok to use a 110V stepdown transformer for a 100V rated amplifier?
2.  Paano mo malalaman ang tamang wattage na kailangan mong stepdown transformer if hindi available ung usage ng amp?  Some old school amps are rated 50 watts x 2 @ 8 ohms, 100V.  Is it safe to use 100 watts step down transformer?  or there's a rule of thumb to use the next higher tier, e.g., 125 watts instead of 100 watts?

Thanks in advance.

Paeng

[lest3rang]

its ok sir hehe

[Nelson de Leon]

boss, sorry to threadjack pero me konting tanong lang po:

1.  Me mga nakikita akong 100V at 110V na amps.  Is it ok to use a 110V stepdown transformer for a 100V rated amplifier?
2.  Paano mo malalaman ang tamang wattage na kailangan mong stepdown transformer if hindi available ung usage ng amp?  Some old school amps are rated 50 watts x 2 @ 8 ohms, 100V.  Is it safe to use 100 watts step down transformer?  or there's a rule of thumb to use the next higher tier, e.g., 125 watts instead of 100 watts?

Thanks in advance.

Paeng

Alam ko okay kasi I do that. hehe! may mga built-in tolerances ang mga gears natin. Actually nga, if you measure your outlet, baka magulat ka sa voltage. Hehe! And then imagine your plugging your gears sa outlet na yun.

[tony]

i will use a 500 watt step down traffo at least for that amp....output power ratings do not reflect power consumption of the amp....

[bhenard]

boss, sorry to threadjack pero me konting tanong lang po:

1.  Me mga nakikita akong 100V at 110V na amps.  Is it ok to use a 110V stepdown transformer for a 100V rated amplifier?
2.  Paano mo malalaman ang tamang wattage na kailangan mong stepdown transformer if hindi available ung usage ng amp?  Some old school amps are rated 50 watts x 2 @ 8 ohms, 100V.  Is it safe to use 100 watts step down transformer?  or there's a rule of thumb to use the next higher tier, e.g., 125 watts instead of 100 watts?

Thanks in advance.

Paeng

1)Since most of AVR's and stepdown X-former nowadays have an option for 100v & 110v, pag MIJ amp mo eh di sa 100v na lang, pag U.S made naman no choice, sa 110v mo nalang i-plug kasi wala naman tayong 120v. dito
2)Kung walang nakaindicate na usage ng amps.better use 500w na X-former unless na powered amp yan
na obvious na magkasinlaki ng X-former ng amp sa stepdown X-former mo.

[edison]

i will use a 500 watt step down traffo at least for that amp....output power ratings do not reflect power consumption of the amp....

Yes Sir, agree ako dito 100 percent kasi may mga amp na hi current na ang rating 60 watt per channel pero maximum consumption ay 300watt. Way back din during Pier days, tinitingnan nila yung power consumption at dun nila ibine-base yung gagamitin na power transformer at ang nakapagtataka pati "price"

[nicemusic]

Contact mo si sir markcrenz 09152035008 sya gumawa nung NAD ko na 100volts naisaksak ko sa 220v it took him 2-3 days to fix.