Author Topic: Speaker DIY'ers (Read 307611 times)

kranoz · « **Reply #1260 on:** Mar 26, 2015 at 10:18 AM »

Hi, guys.

I'm planning on doing DIY speakers in the future.

I'm thinking on using Bamboo plywood, is this a good idea?
Anyone knows kung saan may nabibiling bamboo plywood?

Tia!

mykel18 · « **Reply #1261 on:** Mar 26, 2015 at 11:02 AM »

Bamboo is what DeVore Fidelity uses on their speakers.

deist · « **Reply #1262 on:** Mar 26, 2015 at 11:31 AM »

Definitely better than other types of plywood in terms of stiffness. As to the source of bamboo plywood, I'm also looking for one. Hintay tayo ng replies from other members, baka may alam sila.

Quote from: kranoz on Mar 26, 2015 at 10:18 AM

Hi, guys.

I'm planning on doing DIY speakers in the future.

I'm thinking on using Bamboo plywood, is this a good idea?
Anyone knows kung saan may nabibiling bamboo plywood?

Tia!

kayee · « **Reply #1263 on:** Mar 31, 2015 at 07:37 AM »

sir try this "south sea veneer corp" contact number #893-330-346 di pa ako naka pag inquire but they are making a bamboo type tiles for flooring....baka meron sila na big sizes sir...

RXV · « **Reply #1264 on:** Mar 31, 2015 at 10:00 AM »

Nice to see this in action

Gino · « **Reply #1265 on:** Mar 31, 2015 at 10:04 AM »

I like to see YOURS in action. What happened to it?

camoteque · « **Reply #1266 on:** Mar 31, 2015 at 10:39 AM »

Quote from: kayee on Mar 31, 2015 at 07:37 AM

sir try this "south sea veneer corp" contact number #893-330-346 di pa ako naka pag inquire but they are making a bamboo type tiles for flooring....baka meron sila na big sizes sir...

South Sea Veneer is a locator of ours in Mabalacat. I think what they do have is only veneer slices and not the ply type. They have beautiful real wood veneers though. Only that they do not sell veneer pieces but they contract veneering for furniture manufacturers and other customers.

Below is a open baffle I made which was veneered by them

RXV · « **Reply #1267 on:** Mar 31, 2015 at 11:07 AM »

Quote from: Gino on Mar 31, 2015 at 10:04 AM

I like to see YOURS in action. What happened to it?

Haha oo nga e Gino, hindi ko na naasikaso

Tinatapos ko pa car audio ko. Subukan ko nang tapusin after

Gino · « **Reply #1268 on:** Mar 31, 2015 at 11:51 AM »

Switch channel ka pala. What's is going into the car? Fancy false floor in the trunk or straight installation?

RXV · « **Reply #1269 on:** Mar 31, 2015 at 08:25 PM »

Quote from: Gino on Mar 31, 2015 at 11:51 AM

Switch channel ka pala. What's is going into the car? Fancy false floor in the trunk or straight installation?

Hindi naman. Pinagsabay lang haha. Experimental full range din sa car hehe. Fancy trunk installation

Gino · « **Reply #1270 on:** Apr 01, 2015 at 09:36 AM »

I'm thinking using an APPJ in the car. Then do a radical floor mounted 4" full range speakers. Boxes will be false floors on the driver and passenger sides. My friend did this with his separates and the path lengths it produced were long enough to to create a deep center image. Sound reflects off the windshield practically doubling the path lengths.

RXV · « **Reply #1271 on:** Apr 01, 2015 at 01:35 PM »

Wow, that would be a very challenging project. Hirap nun.

I also opted to use tubes for my car audio, but I decided against it. Mas maraming hassle e kesa benefits. At baka masira ang tubes sa intense vibration, sayang lang

Gino · « **Reply #1272 on:** Apr 01, 2015 at 03:39 PM »

They survived tanks, planes, and Allied bombs he he. But yeah, the last thing you want to do in a car is maintain the amp.

hobbymaster2003 · « **Reply #1273 on:** Apr 09, 2015 at 11:02 AM »

hi mga master...i need a full range speaker na mga 2.5"-3" lang diameter...parang mga bose...anybody can point me the right direction would be greatly appreciated. thanks in advance mga bossing.

tony · « **Reply #1274 on:** Apr 09, 2015 at 11:17 AM »

Quote from: hobbymaster2003 on Apr 09, 2015 at 11:02 AM

hi mga master...i need a full range speaker na mga 2.5"-3" lang diameter...parang mga bose...anybody can point me the right direction would be greatly appreciated. thanks in advance mga bossing.

dami nyan sa Raon...tyaga langsa paghahanap....

hobbymaster2003 · « **Reply #1275 on:** Apr 27, 2015 at 01:19 PM »

mga master...baka meron kayong alam na meron tannoy hpd 385 dual concentric speakers 15"...let me.know lang mga bossing...and let me know the price.

tony · « **Reply #1276 on:** Apr 27, 2015 at 05:04 PM »

^post ka sa marketplace, under looking for...

rochie · « **Reply #1277 on:** Apr 27, 2015 at 05:42 PM »

Quote from: hobbymaster2003 on Apr 09, 2015 at 11:02 AM

hi mga master...i need a full range speaker na mga 2.5"-3" lang diameter...parang mga bose...anybody can point me the right direction would be greatly appreciated. thanks in advance mga bossing.

kung hanap mo 8inches meron ako, alnico magnet.

DTNS · « **Reply #1278 on:** Apr 28, 2015 at 02:38 PM »

Quote from: mykel18 on Mar 26, 2015 at 11:02 AM

Bamboo is what DeVore Fidelity uses on their speakers.

Audioengine also uses bamboo in some of their speakers.

camoteque · « **Reply #1279 on:** May 12, 2015 at 11:31 AM »

A money-is-no-object

Audio Nirvana project that I'm doing right now will utilize this ebony wood veneer:

Ply laminated with this veneer

I got this solid wood that I will use for the framing of the baffle.

Our inspiration

remington · « **Reply #1280 on:** May 12, 2015 at 11:38 AM »

maganda sigurado finish nyan!!!!eye and ear candy

camoteque · « **Reply #1281 on:** May 12, 2015 at 11:45 AM »

Quote from: remington on May 12, 2015 at 11:38 AM

maganda sigurado finish nyan!!!!eye and ear candy

Sana nga! Ha ha.

shrek7 · « **Reply #1282 on:** May 12, 2015 at 08:28 PM »

Ganda naman nyan sir! Anong design ng enclosure? Same din po ba sir sa GR?

camoteque · « **Reply #1283 on:** May 12, 2015 at 10:04 PM »

Quote from: shrek7 on May 12, 2015 at 08:28 PM

Ganda naman nyan sir! Anong design ng enclosure? Sale din po ba sir sa GR?

May konting difference lang sa 5.6mk2 like volume adjustment to compensate for doubling of panel where the AN sits. Also, I will try a downfiring port as requested by owner. If this will not work well, I can simply close the bottom port and go back to the original design.

Parang kensington ang itsura with maybe a minor variation.

shrek7 · « **Reply #1284 on:** May 13, 2015 at 07:10 AM »

Wow! Nice! I am excited to see the final product!

camoteque · « **Reply #1285 on:** May 21, 2015 at 10:24 AM »

AN speaker cabinet starting to have a face

remington · « **Reply #1286 on:** May 21, 2015 at 10:31 AM »

WOW naman

hexited na sa magiging finish

camoteque · « **Reply #1287 on:** May 21, 2015 at 10:38 AM »

Quote from: remington on May 21, 2015 at 10:31 AM

WOW naman hexited na sa magiging finish

Bro marami pa idea ang may-ari. Baka may magbago pa.

RXV · « **Reply #1288 on:** May 21, 2015 at 10:51 AM »

Wow, now THAT is a piece of art.

camoteque · « **Reply #1289 on:** May 22, 2015 at 07:52 PM »

Using manual planers to shape the baffle framings of this AN cabinet. The hardwood is very hard to work on.

Some more routing and planing to do.