Hi!
What about pre-amps?
Thanks!
Hi Sir, here are the additional price list:
PRE-AMPS:SC-3EXVacuum Tube Component : 2 x 12AU7(ECC82), 4 x 12AX7(ECC83), 1 x 5AR4(GZ34)
Frequency Response : 5Hz ~ 50kHZ ± 0.5dB
Total Harmonic Distortion : 0.01%
Signal to noise ratio : 95dB
Input Impedance : 100K ohms
Output Impedance : 1 k ohm
Line Inputs : 6: CD, LD Tape tuner, Aux1/2
Circuitry : Class A
Dimensions : 210 x 200 x 440 mm
Weight : 9.5kg
SRP: 40,000VC-100iSPECIFICATIONS - LINE PRE-AMPLIFIERFrequency Response: 5Hz~150kHz ±1dB
Power Requirement: 220VAC±5%, 50/60Hz
THD: 0.15% (1kHz)
Power Consumption: 30W
S/N Ratio: 98dB
Dimension: 440 x 369 x 104 mm
Input Impedance: 47kΩ
Weight: 10kg
Output: 2V (15V Max)
SPECIFICATIONS - PHONO PRE-AMPLIFIERInput Sensitivity: 3mV
RIAA: ±0.25dB
Input Impedance: 47kΩ
Total Gain: 40dB
SRP: 50,000SC-6LSA compact-sized linestage preamplifier with full-sized features. Designed to drive power amps like the Cayin 860 and 800MK, it's tube compliment consists of two 12AX7EH, two 12AU7EH and one 5AR4. The huge capsuled toroidal power transformer prevents magnetic leakage to give very quiet performance and full dynamic music reproduction. Cayin's first dedicated high-end preamp, built to the same exacting standards that apply to their integrated and power amps. Yet again Cayin comes through with a gorgeous, hand-made piece - the same classic tube sound and classic tube look.
Technical specification Tube Preamplifier
Frequency range: 10 Hz – 100 kHz ± 0.5 dB
Total harmonic distortion (THD): < 0.01%
Signal-to-noise ratio: 95 dB
Input Impedance: 250 kohm
Output Impedance: 3 k ohm
Vacuum tube: 2 x 12AU7(ECC82), 2 x 12AX7(ECC83) 1 x 5AR4(GZ34)
Dimensions (W x H x D): 210 x 160 x 320
Weight: 7 kg
Input Terminals: Aux, Tuner, Phono, CD
Output terminals: Pre-out, Rec-out
Circiut: Class A
Body colour: chrom
Front plate: Silver
SRP: 65,000SC-10Frequency Response: 10Hz~60kHz ±0.5dB
Line Inputs: Auxillary, Tape, Tuner, CD
THD: 0.25%
Circuitry: Class A
S/N Ratio: 97dB
Dimension: 445 x .370 x 180 mm
Input Impedance: 100K
Weight: 16kg
Output Impedance: 820Ω
Tube Components: 4 x 6922EH
2 x 5AR4
SRP: 160,000SC-8LSSPECIFICATIONS
Frequency response: 10Hz~40kHz ±0.5dB
THD: 0.25%
Output: 2v (8v Max.)
Input sensitivity: 500mV
S/N ratio: 92dB
Input impedance: 100k Ω
Out impedance: 600 Ω
Dimension: 460mm×290mm×215mm
Weight: 14kg
Tube: 5Z3P×1, 6SN7GT×2, 6SL7GT×1, 6L6GC×1, 300B×2
SRP: 275,000Phono StageMC-1 Step-up for MC cartridge The VAS MC-One Step-Up Transformer is a simple, efficient tube driven step-up transformer. This top of the line component features point-to-point hand wiring and state-of-the-art transformer technology - all this in a new, heavy-duty chassis. The MC-One Step-up Transformer matches gain and impedance of phono cartridge. Separate input for High Impedance (100 Ohm) and Low Impedance (47 Ohm) and gold input and output jacks increased dynamic range with a dead quiet noise floor!
SRP: 18,000PHONO-ONE MM/MC Phono StagePhono One vacuum tube preamplifier was developed for the decerning Vinyl lover. Premium Mundorf and Realcap capacitors and hand made pint to point construction is found, just like our tube amplifiers.
Technical:
• MM & MC operation
• Vacuum Tube Design, Hand made.
• Weight 10.5 Kg.
• Silver finish.
• Dimensions:290mmx120mmx310mm (WxHxD)
SRP: 60,000