New Firmware update from Cocktail Audio
To download firmware update, please visit
http://www.cocktailaudio.com/firmware.htmlFirmware Release Note for R1656 ① Release date : May 11th of 2012
② Version of updated firmware : R1656
③ Updated contents to R1656 from previous version R1644
1 Audio codec compatibility improved
1-1) Supports Apple Lossless Audio Codec(ALAC), AIFF, AIF, m4a
1-2) Supports high resolution FLAC file(24bit/192Khz) properly
1-3) Supports high resolution WAV file(24bit/192Khz) properly
1-4) Cleared the bug that some MP3 files make X10 dead
※ note :
① X10 does NOT support high resolution WMA file
② X10 does NOT support Multichannel audio file
2 Audio output re-definition for high resolution audio file CPU of X10
Amp(Speaker Out) : Max 48Khz
DAC(Line Out) : Max 192Khz
SPDIF(Optical) : Max 96Khz
※ This new firmware(R1655) supports 96Khz sampling rate output through SPDIF(Optical) Audio format Play back resolution Resolution for each output
LINE OUT SPDIF(Optical) Speaker OUT
WAV up to 24bit/192Khz Max 192Khz Max 96Khz Max 48Khz
FLAC up to 24bit/192Khz (downmixing)
3 Extension of My Playlist function
※ note :
① Previous firmware(R1644) supported My Playlist function by the unit of Song only.
② If you have never tried My Playlist function or don't know about it, please refer to the number 4
My Playlist function of the Firmware Release Note for R1644 at our website(
http://www.cocktailaudio.com)
This new Firmware(R1655) lets you run My Playlist function by the unit of Album, Artist, Genre or Discography also like below.
① Place the cursor on the list of Album, Artist, Discography or Genre.
② Press BLUE key of remote control.
③ The selected Album will be played after showing [Creating Playlist 'My Playlist'] like left screen.
④ "My Playlist" will be created automatically at the Playlist of the main screen.
4 Improvement WebInterface
4-1) Web Server re-installation
※ If there is already 'My Playlist', pressing Blue key will show you
[ Play Next/Play Last ] like left screen.
* Play Next : to add on next position.
* Play Last : to add on last position.
As WebInterface is updated, you must reinstall Web Server at SETUP like below to apply improvement.
① Go to Network Service at SETUP menu.
② Set Web Server as ON.
③ Select Reinstall and select OK and confirm it with OK button.
④ It will take around 10 ~ 15 seconds to complete re-installation.
※ note : For user's guide of WebInterface, you may see it at SUPPORT/FIRMWARE/R1644 Release Note of
http://www.cocktailaudio.com4-2) Improved contents
4-2-1) WebInterface works properly based on Safari(Browser for iPad or Mac)
4-2-2) You can play by the unit of Album, Genre, Artist, Playlist, iRadio(Favorite list) also.
4-2-3) Others
* Web Remote works more smoothly
* More languages like Italian, French, Polish are added at config.
5 Function to check information on Music DB Play icon
You can check Music DB information by pressing INFO key of remote control. You can get information like the number of track, genre, album, artist and not converted track in the Music DB.
press INFO key
6 Function of Setup Assistant (Setup Wizard)
This function is valid for only '1st booting up after X10 purchasing' and ' 1st booting after factory reset run'
※ Caution(to distributors or dealers) : If you run any function after factory reset run, this Setup Wizard
will NOT work during 1st booting by users. So, X10 must be power OFF without any function run after
factory reset.
① OSD language ② Audio ripping format ③ Network ④ Time setting
press OK press OK press OK
※ note :
① You will be asked about HDD format in case only that the installed HDD is NOT formatted.
② If you want to set up after completing booting up, you may skip each step by pressing RETURN key.
7 Others
* Audio file compatibility is improved.
* UPnP compatibility is improved
* FLAC, OGG file seek function is improved
* Polish OSD language is updated
* Italian, Polish, French are added to WebInterface language config.
* Much code updating work was done for general system stabilization.
Thank you very much !!!!!!!