Topic: CUSTOM SPEAKERS OF NIRVBKR, SIMPLY THE BEST!!!

[iiinas]

pag nagkapangalan na, balik ko yung grill for rebadging ha?   

[anchit]

nung narinig ko to napaisip ako bigla mag tube eh!


mga boss, tatakbo na tong speakers ni sir anthony using dared tube amps? meron sa sulit na 8k lang eh.

[John E.]

nung narinig ko to napaisip ako bigla mag tube eh!


mga boss, tatakbo na tong speakers ni sir anthony using dared tube amps? meron sa sulit na 8k lang eh.

nice bro! go go go!  dumadami ang tubero dito

[anchit]

nice bro! go go go!  dumadami ang tubero dito

tatakbo ba yan sa cheap dared tube amp? o kelangan dyan at least cayin? hehe kasi kung 8k lang yung dared at 5k ang speakers aba pwede na yan, CDP na lang kulang at tatakbo na.

[reynold]

tatakbo ba yan sa cheap dared tube amp? o kelangan dyan at least cayin? hehe kasi kung 8k lang yung dared at 5k ang speakers aba pwede na yan, CDP na lang kulang at tatakbo na.

Hahaha, aayaw-ayaw ka pa nung tinatanong kita kung gusto mo mag-separate audio set-up ha... ngayon magtu-tubo ka pa, hehehe 

Yakang-yaka ng dared yang speaker ni Anthony, mataas naman ang sensitivity nyan e

Go Go Go!!!

[anchit]

Hahaha, aayaw-ayaw ka pa nung tinatanong kita kung gusto mo mag-separate audio set-up ha... ngayon magtu-tubo ka pa, hehehe 

Yakang-yaka ng dared yang speaker ni Anthony, mataas naman ang sensitivity nyan e

Go Go Go!!!

haha dati kasi masaya nako sa HTIB eh, langya nung nakita ko tong PDVD naiba eh.

[macdon]

tatakbo ba yan sa cheap dared tube amp? o kelangan dyan at least cayin? hehe kasi kung 8k lang yung dared at 5k ang speakers aba pwede na yan, CDP na lang kulang at tatakbo na.

You can use a dared mp5 amp with the clones, lalo na kung near field listening kalang......however, speakers in nature always needs ample power to sound their best. With ample power, speakers will always bring out the best of their capabilities and you'll have more flexibility as well as headroom.

The dared's 13watts is ok, but I doubt if it could reveal the magic of the clones.

I also have the dared mp5, but since I only use it for computer use, so near field lang sya

For the clones, minimum of 40-50watts cguro.......but if you have higher wattage, then the more the merrier 

[pupuek]

<x>
Genesis (beginning)
Katharos (Greek for clarity)
Apollo (God of music)

<x> Series

[anchit]

You can use a dared mp5 amp with the clones, lalo na kung near field listening kalang......however, speakers in nature always needs ample power to sound their best. With ample power, speakers will always bring out the best of their capabilities and you'll have more flexibility as well as headroom.

The dared's 13watts is ok, but I doubt if it could reveal the magic of the clones.

I also have the dared mp5, but since I only use it for computer use, so near field lang sya

For the clones, minimum of 40-50watts cguro.......but if you have higher wattage, then the more the merrier 

got it! so sir ano yung most affordable tube amp na kaya yung clone ni anthony? thanks!

[iiinas]

got it! so sir ano yung most affordable tube amp na kaya yung clone ni anthony? thanks!

tingnan mo mga amx na push pull. mga 16-20k mga 30watter na sya.

[praktikal]

sa palagay ko ok na match sa "G-Spot" speakers ni Anthony ang 4 watter ng AMX. try nyo dalhin ang speakers sa AMX 

[macdon]

For those who wish to try tubes, a tube integrated amp (power & preamp in one chassis) would be the cheapest option. For branded, locally made AMX comes to mind as the cheapest brand, then up the ladder we have those chinese brands like Cayin, Bada, Dared & Xindak. Of course, any preowned of those brands should also be considered.

One feature that you would probably want in a tube integrated amp is a pre-out for expansion. With a pre-out, you can connect a solid state power amplifier in the future for a hybrid setup or possibly add a powered subwoofer to compliment your bookshelf speakers. Then again, having 2 pre-outs would be heaven!

Now, for those who would prefer jumping to the next level should probably consider "separates" - a tube preamp and a solid state power amp. Having this setup would lessen your upgrade bug in the future & should last you for years if not decades
For a 2ch solid state poweramp, consider preowned as a cheaper option. Poweramps have no moving parts, so they truly last for decades. There's always a poweramp for sale in our market section or you could also find some in the pier.

For a tube preamp, here's where the DIY rules because they will always be cheaper & will sound similar or sometimes better than branded preamps. Besides, branded preamps are always more expensive than poweramps.
The best advantage with having a DIY preamp made is that you could always have it custom done to your specs. You choose how many inputs you like, choose how many pre-outs and you can even add a phono section inside the chassis if you think you might like to try a turntable down the road.
Jojod's custom aikido preamp ranks as one of the best options out there when it comes to DIY preamps, then there is also the Tono Violin made locally as well.
There are many sources for DIY tube preamps around our community & they will always sound similar or better compared to branded preamps....at lower costs of course

If in the future you wanna change the sound of your preamp - just change the tubes to a different brand & you'll get a different flavor   
 

[CMac]

For those who wish to try tubes, a tube integrated amp (power & preamp in one chassis) would be the cheapest option. For branded, locally made AMX comes to mind as the cheapest brand, then up the ladder we have those chinese brands like Cayin, Bada, Dared & Xindak. Of course, any preowned of those brands should also be considered.

One feature that you would probably want in a tube integrated amp is a pre-out for expansion. With a pre-out, you can connect a solid state power amplifier in the future for a hybrid setup or possibly add a powered subwoofer to compliment your bookshelf speakers. Then again, having 2 pre-outs would be heaven!

Now, for those who would prefer jumping to the next level should probably consider "separates" - a tube preamp and a solid state power amp. Having this setup would lessen your upgrade bug in the future & should last you for years if not decades
For a 2ch solid state poweramp, consider preowned as a cheaper option. Poweramps have no moving parts, so they truly last for decades. There's always a poweramp for sale in our market section or you could also find some in the pier.

For a tube preamp, here's where the DIY rules because they will always be cheaper & will sound similar or sometimes better than branded preamps. Besides, branded preamps are always more expensive than poweramps.
The best advantage with having a DIY preamp made is that you could always have it custom done to your specs. You choose how many inputs you like, choose how many pre-outs and you can even add a phono section inside the chassis if you think you might like to try a turntable down the road.
Jojod's custom aikido preamp ranks as one of the best options out there when it comes to DIY preamps, then there is also the Tono Violin made locally as well.
There are many sources for DIY tube preamps around our community & they will always sound similar or better compared to branded preamps....at lower costs of course

If in the future you wanna change the sound of your preamp - just change the tubes to a different brand & you'll get a different flavor   
 

one of the most educating posts i've read regarding tubes fyi's. very simple with ample references. 

[iiinas]

one of the most educating posts i've read regarding tubes fyi's. very simple with ample references. 

yan si sir macdon. guru! 

[nerveblocker]

yan si sir macdon. guru! 

yan si sir macdon...mangku!

[iiinas]

yan si sir macdon...mangku!

bwahaha! ayos doc, rhyme!

[markcrenz]

yan si sir macdon. guru! 

sana yung mga guru natin sa iskul ganyan din kagagaling!

sir anthony magkano speaker "stands" na katulad ng kay sir macdon? for the finished box only, ako na maglalagay ng sub & amp. i'm contemplating on imitating his setup (wala bang copyright yan sir mac?) at baka may iba pang proac clone owners na interesado rin sa ganung stands.

[macdon]

yan si sir macdon. guru! 

Ngek
Natutunan ko lang yan po sa mga ibang guru natin dito - pinapasa ko lang yung info 

yan si sir macdon...mangku!

Among other things doc.......among other things

[macdon]

sana yung mga guru natin sa iskul ganyan din kagagaling!

sir anthony magkano speaker "stands" na katulad ng kay sir macdon? for the finished box only, ako na maglalagay ng sub & amp. i'm contemplating on imitating his setup (wala bang copyright yan sir mac?) at baka may iba pang proac clone owners na interesado rin sa ganung stands.

Brader - go lang sir Walang copywright yan Natatawa nga kami ni brader Anthony nung ginawa ko yung drawing - mukang bote ng alak or ketchup bottle yung itsura eh

[John E.]

yan si sir macdon...mangku!

magaling and effective!

[John E.]

Ngek
Natutunan ko lang yan po sa mga ibang guru natin dito - pinapasa ko lang yung info 

nakupo isa talaga si sir macdon sa original gurus natin dito eto kitang kita yung class picture nila!

[John E.]

got it! so sir ano yung most affordable tube amp na kaya yung clone ni anthony? thanks!

Its AMX EL84 sonatina 15watter amp and yes its hooked up with my 9.4 Wharf 86db sentivity..
so far, very satisfied with the music it produce especially when amp is already warm...

thanks sir..

eto bro anchit another members amx 15 watter driving a 9.4

[pupuek]

How would the PROAC clones compare to the Aurum Cantus F5000R which is in the same price range?

[diy_master]

sana yung mga guru natin sa iskul ganyan din kagagaling!

sir anthony magkano speaker "stands" na katulad ng kay sir macdon? for the finished box only, ako na maglalagay ng sub & amp. i'm contemplating on imitating his setup (wala bang copyright yan sir mac?) at baka may iba pang proac clone owners na interesado rin sa ganung stands.

compute ko nalang, medyo katuwaan lang namin ni sir macdon yung speaker stand na active 8inc sub.

[diy_master]

mga sir, naka group of 10 na ako both pinoy and none pinoy member. now last group buy for 5 na before maging 6k na. pls call me sa 357 7990 or 0921 4697091. tia

[iiinas]

mga sir, naka group of 10 na ako both pinoy and none pinoy member. now last group buy for 5 na before maging 6k na. pls call me sa 357 7990 or 0921 4697091. tia

bilis ah. congrats sir anthony, aba, last 5 for 5k. bili na bili na!

[macdon]

mga sir, naka group of 10 na ako both pinoy and none pinoy member. now last group buy for 5 na before maging 6k na. pls call me sa 357 7990 or 0921 4697091. tia

No worries braders - even at 6k, its still a great bargain But to those who are on the fence deciding if they're gonna buy this, well here's your chance to save 1k 

Ang tanong, bakit kaya matatapos na ang promo.........does this mean may bagong lalabas?

Hmmmm.......do I smell 2 kinds of floor standers, a center, a sub.........and possibly a proac tablette clone? 

Abangan ang susunod na kabanata.........

[lakambini]

mga sir, naka group of 10 na ako both pinoy and none pinoy member. now last group buy for 5 na before maging 6k na. pls call me sa 357 7990 or 0921 4697091. tia

SIR

please post pics of the speaker,
tnx

[John E.]

No worries braders - even at 6k, its still a great bargain But to those who are on the fence deciding if they're gonna buy this, well here's your chance to save 1k 

Ang tanong, bakit kaya matatapos na ang promo.........does this mean may bagong lalabas?

Hmmmm.......do I smell 2 kinds of floor standers, a center, a sub.........and possibly a proac tablette clone? 

Abangan ang susunod na kabanata.........

looking forward ako sa FS sana sa EB dalin ni anthony

[iiinas]

grill off


the velo tweeter


th 5" oem woofer


the terminals

here it is @lakambini, my proac clones from sir anthony.