Author Topic: JojoD's Tube and Solid State Projects (Read 1210213 times)

JojoD818 · « **Reply #9300 on:** Nov 24, 2013 at 08:55 PM »

Quote from: Gino on Nov 24, 2013 at 02:09 PM

Aba, may timber junior na. Good job.

Bro, idol ko yan si timber eh hehehe... thanks!

Quote from: audiojunkie on Nov 24, 2013 at 06:23 PM

great WIP...
daming clamps... pahiram master...

thanks brader!

kakabili ko lang ulit ng 2pcs kanina, every time na mag earn ng points yun advantage card ko redeem ko agad ng clamps hehehe...

sige ba, ano ba ang i-clamp natin diyan brader?

JojoD818 · « **Reply #9301 on:** Nov 24, 2013 at 08:57 PM »

Quote from: timber715 on Nov 24, 2013 at 07:02 PM

Jojo, brader, sana. Hindi naka glue sa leg frame yung top pa. Kasi may tendency yan mag contract and/expand depending on the climate/temperature. Pag nag expand kasi at walang lugar na pupuntahan yung movement, ang tendency paakyat.... That is the reason why I make my tops separate from the leg assemblies.

Naku naloko na, mga 1mm lang as in maliit lang na space ang meron yun 2 x 4 dun sa table top brader. Kaso dun nga sa pinaka frame naka glue, pero yun dalawang end piece nilagyan ko ng screws.

di bale sa susunod lalagyan ko ng breathing space.

JojoD818 · « **Reply #9302 on:** Nov 24, 2013 at 09:18 PM »

habang nanonood ng boxing...

shave lang konte...

trimmed the sides...

used one of the pallets as guide for the CS...

sanding and it's ready for some sealer... rounded the corners and edges too para kay bunso...

timber715 · « **Reply #9303 on:** Nov 24, 2013 at 09:35 PM »

Nice work brader... Another suggestion for you would be to try a different species of wood. Pine will leave sap on your blades which in essence dull it. Clean your blades or wax the before using in sappy material like pine. Nevertheless, your work is commendable na, susunod di na ako makakabenta ng rack.... Hehehe

Gino · « **Reply #9304 on:** Nov 24, 2013 at 09:41 PM »

Looking really solid.

JojoD818 · « **Reply #9305 on:** Nov 25, 2013 at 12:43 PM »

Quote from: timber715 on Nov 24, 2013 at 09:35 PM

Nice work brader... Another suggestion for you would be to try a different species of wood. Pine will leave sap on your blades which in essence dull it. Clean your blades or wax the before using in sappy material like pine. Nevertheless, your work is commendable na, susunod di na ako makakabenta ng rack.... Hehehe

Thanks brader, magtitingin ako ng ibang wood for another challenge. I like pine kasi very soft, easy to work with kaya perfect for practice. Masipag naman ako maglinis ng tools, I have liters of light machine oil kasi I clean even my drill bits after a drilling session.

I'm not sure what you mean by waxing the blade, I only use oil eh. Wax as in candle wax ba brader?

Salamat brad, naku pang personal and family use only lang ang wood works ko, natutuwa lang ako kasi ang dami bago na techniques na di ko nagawa dati.

Quote from: Gino on Nov 24, 2013 at 09:41 PM

Looking really solid.

Thanks bro, it has to be able to support a small drill press and desk grinder. They will be removable via bolts and tee nuts. Should also be able to attach vices and other tools. Finishing muna konte para gumanda hehehe...

timber715 · « **Reply #9306 on:** Nov 25, 2013 at 03:50 PM »

Wax as in jhonson's floor wax brader, these work very well with blades and tool surfaces like handplane soles and circular saw bottoms. It makes them slide better....

JojoD818 · « **Reply #9307 on:** Nov 26, 2013 at 09:24 AM »

Quote from: timber715 on Nov 25, 2013 at 03:50 PM

Wax as in jhonson's floor wax brader, these work very well with blades and tool surfaces like handplane soles and circular saw bottoms. It makes them slide better....

Ah meron dito niyan! Thanks for the suggestion brader, will definitely try this...

timber715 · « **Reply #9308 on:** Nov 28, 2013 at 01:10 AM »

Wala bang updates? Hehehe

ninjababez® · « **Reply #9309 on:** Nov 28, 2013 at 05:15 AM »

bro jojo na chubby sana ganyan na din ako kagaling next year!!

JojoD818 · « **Reply #9310 on:** Nov 28, 2013 at 01:24 PM »

Quote from: timber715 on Nov 28, 2013 at 01:10 AM

Wala bang updates? Hehehe

Nothing much brader... the good news is pwede ko na ipatong and secure the drill press using bolts and tee nuts...

another good news is nagagamit ko na siyang computer table hahaha... gamitin ko muna habang malinis pa siya kasi magiging working table ko yan...

ang last good news si misis gusto daw ng ganito so gagawa pa ako ng isa pa hehehe...

JojoD818 · « **Reply #9311 on:** Nov 28, 2013 at 01:25 PM »

Quote from: ninjababez® on Nov 28, 2013 at 05:15 AM

bro jojo na chubby sana ganyan na din ako kagaling next year!!

oo naman, ikaw pa bro!

kumusta na ang shopping ng power tools?

JojoD818 · « **Reply #9312 on:** Nov 28, 2013 at 07:01 PM »

pwede pala router panggawa dado at finger joints... (wag muna dovetail, madugo yan)...

ano pa ba pwede gawin with a router?

timber715 · « **Reply #9313 on:** Nov 28, 2013 at 07:05 PM »

Quote from: JojoD818 on Nov 28, 2013 at 07:01 PM

pwede pala router panggawa dado at finger joints... (wag muna dovetail, madugo yan)...

ano pa ba pwede gawin with a router?

Router is my favorite powertool. Sobrang dami mong magagawa with a router.

JojoD818 · « **Reply #9314 on:** Nov 28, 2013 at 07:40 PM »

Quote from: timber715 on Nov 28, 2013 at 07:05 PM

Router is my favorite powertool. Sobrang dami mong magagawa with a router.

Looks like a worthy addition to my tools. Been watching youtube videos regarding joinery with routers.

JojoD818 · « **Reply #9315 on:** Nov 28, 2013 at 10:12 PM »

testing...

ninjababez® · « **Reply #9316 on:** Nov 28, 2013 at 11:27 PM »

Quote from: JojoD818 on Nov 28, 2013 at 01:25 PM

oo naman, ikaw pa bro!

kumusta na ang shopping ng power tools?

window shopping muna bro, pero definitely ace hardware ang bagsak ko.
wala ibang hardware store kaya installment

ninjababez® · « **Reply #9317 on:** Nov 28, 2013 at 11:28 PM »

Quote from: JojoD818 on Nov 28, 2013 at 10:12 PM

testing...

bro naloko ako nung vinyl akala ko iba ibang wood na dinikit tulad ng ginagawa ni bro slim

JojoD818 · « **Reply #9318 on:** Nov 28, 2013 at 11:33 PM »

Quote from: ninjababez® on Nov 28, 2013 at 11:27 PM

window shopping muna bro, pero definitely ace hardware ang bagsak ko.
wala ibang hardware store kaya installment

mapapamahal ka nga lang pero convenient sa iyo yun then why not, importante may tools.

Quote from: ninjababez® on Nov 28, 2013 at 11:28 PM

bro naloko ako nung vinyl akala ko iba ibang wood na dinikit tulad ng ginagawa ni bro slim

hahaha yun sobrang vinyl yun ginawa ko mouse pad...

audiojunkie · « **Reply #9319 on:** Nov 29, 2013 at 12:25 AM »

Quote from: JojoD818 on Nov 24, 2013 at 08:55 PM

Bro, idol ko yan si timber eh hehehe... thanks!

thanks brader!

kakabili ko lang ulit ng 2pcs kanina, every time na mag earn ng points yun advantage card ko redeem ko agad ng clamps hehehe...

sige ba, ano ba ang i-clamp natin diyan brader?

Kunting wood working lang brader....

timber715 · « **Reply #9320 on:** Nov 29, 2013 at 12:50 AM »

Brader since you watch youtube, look for the woodwhisperer or Marc Spagnolo. Not only does he do good work, he often has technical explanations that go with it, quite educational in the proper way.
Also if you can find David Marks, galing din yan. Pero kung simple lang type mo, try mo woodworking for mere mortals.

JojoD818 · « **Reply #9321 on:** Nov 29, 2013 at 01:36 AM »

Quote from: audiojunkie on Nov 29, 2013 at 12:25 AM

Kunting wood working lang brader....

Nakaka addict din brader, kung ano-ano naiisip ko gawin...

ninjababez® · « **Reply #9322 on:** Nov 29, 2013 at 01:38 AM »

mga bro ano tawag dun sa gamit na pang pakinis ng wood?
yun parang naliha na after mo gamitin yung tool.

JojoD818 · « **Reply #9323 on:** Nov 29, 2013 at 01:42 AM »

Quote from: timber715 on Nov 29, 2013 at 12:50 AM

Brader since you watch youtube, look for the woodwhisperer or Marc Spagnolo. Not only does he do good work, he often has technical explanations that go with it, quite educational in the proper way.
Also if you can find David Marks, galing din yan. Pero kung simple lang type mo, try mo woodworking for mere mortals.

Putch kanina ko pa pinapanood si Steve Ramsey ng woodworking for mere mortals ang kuleeet!!!

Try ko yan iba later brad... looks like need ko din pala ng router table para makapag finger joints... yun din pala planer thicknesser nakuha din attention ko...

Hay wala na new phone at g-shock for Christmas, puro power tools na lang!

JojoD818 · « **Reply #9324 on:** Nov 29, 2013 at 01:43 AM »

Quote from: ninjababez® on Nov 29, 2013 at 01:38 AM

mga bro ano tawag dun sa gamit na pang pakinis ng wood?
yun parang naliha na after mo gamitin yung tool.

bro, random orbital sander...

frootloops · « **Reply #9325 on:** Nov 29, 2013 at 01:52 AM »

Pwede ba mas mahaba dyan brad para patungan ng gears? Okay yan hindi masyado mababa...hirap kasi tumungo pag mababa eh.

Galing!

ninjababez® · « **Reply #9326 on:** Nov 29, 2013 at 02:42 AM »

ito ba yun bro?

Quote from: JojoD818 on Nov 29, 2013 at 01:43 AM

bro, random orbital sander...

JojoD818 · « **Reply #9327 on:** Nov 29, 2013 at 04:29 AM »

Quote from: frootloops on Nov 29, 2013 at 01:52 AM

Pwede ba mas mahaba dyan brad para patungan ng gears? Okay yan hindi masyado mababa...hirap kasi tumungo pag mababa eh.

Galing!

Realm ni brader timber yan pag patungan ng gears!

Brad pag nahihihrapan na tumungo isa lang ibig sabihin niyan... apir tayo!

JojoD818 · « **Reply #9328 on:** Nov 29, 2013 at 04:31 AM »

Quote from: ninjababez® on Nov 29, 2013 at 02:42 AM

ito ba yun bro?

yan na nga brader, ang maganda sa kanya yun mga nabibili sandpaper sakto tatlo ang magagawa mo at may kasama pambutas para dun sa air vents...

frootloops · « **Reply #9329 on:** Nov 29, 2013 at 04:57 AM »

Quote from: JojoD818 on Nov 29, 2013 at 04:29 AM

Realm ni brader timber yan pag patungan ng gears! Brad pag nahihihrapan na tumungo isa lang ibig sabihin niyan... apir tayo!

May arthritis ka na rin?

Remote lang katapat nyan!