Author Topic: Alvin's Movieworld 2.40 CIH SETUP (Update 07/11/09 post#287) (Read 36051 times)

ricky · « **Reply #30 on:** Mar 23, 2006 at 11:43 PM »

bro i just noticed na yung back wall mo is the same as yung side wall sa set-up ng pinoy big brother confession room

Kato · « **Reply #31 on:** Mar 24, 2006 at 12:54 AM »

Quote from: ricky on Mar 23, 2006 at 11:43 PM

bro i just noticed na yung back wall mo is the same as yung side wall sa set-up ng pinoy big brother confession room

baka si Big Brother nga talaga si Alvinthx2?

Munskie · « **Reply #32 on:** Mar 24, 2006 at 09:54 AM »

pioneer si sir alvin...he's the very first one to rent out dvd's here in angeles city..way before nauso mga p*****d titles. He really knows stuff.....kaya yung mga diffusers are really rare sa atin...lalo na DIY....

MAtZTER · « **Reply #33 on:** Mar 24, 2006 at 10:23 AM »

Awesome jaw dropping high end gears!

Congrats! Galing ng HT room!

ronjet · « **Reply #34 on:** Mar 25, 2006 at 03:07 AM »

Quote from: alvinthx2 on Mar 23, 2006 at 06:30 PM

Here's a link that I found (DIY diffusors)

http://www.digitalaudiorock.com/cgi-bin/qrd.cgi

thanks for the link sir alvin.

EHMBU · « **Reply #35 on:** May 27, 2006 at 09:27 PM »

wowowowow!!!! mukhang dedicated ata ang room mo sir alvin??! nice gears!!! ILOVEIT!!!!

Abad Santos 7 · « **Reply #36 on:** May 27, 2006 at 09:48 PM »

Quote from: alvinthx2 on Mar 22, 2006 at 06:43 PM

Thank you everyone. Yes I am from Pampanga, Will try to get link on the net on how to DIY RPG diffusors.

Also: the room ration that I used: 2.35, 1.6, 1

Reverberation time is around .35 seconds using a reverberation meter

Where exactly in Pampanga??? Maybe I could pay a visit 1 day and see the set-up in person. I am also in Pampanga...very inspiring....

Cheers.

mika888 · « **Reply #37 on:** May 28, 2006 at 09:07 PM »

Nice set-up..... congrats!

sanction214 · « **Reply #38 on:** May 29, 2006 at 12:03 AM »

I guess this would be my first post...i've been viewing other set-up too...wheeew!ganito pala ka astig set-up mga members dito...i'm from cebu city btw..looking for a site that would generate answers to my curiousity kung ano ba talaga ang HT...newbie palang ako sa pag set-up....just bought jbl scs 200.5...pero mukang ang layo ng agwat...ang gaganda ng mga gadgets nyo...brands that i'm not really aware of..i guess i would be browsing pinoydvd more often...more power!
kakaingit na set up!

alvinthx2 · « **Reply #39 on:** May 30, 2006 at 05:22 PM »

I have sold my scaler and krell processor. In a few days(crossing my fingers), I will have the Anthem AVM50 as my processor/scaler. It has the latest Gennum VPX chip that rivals the quality of Silicon Optix HQV. I am also installing a Sony Vpl vw100 1080p sxrd projector by mid june for a client. oo nga pala, I will also be having Toshiba's hd dvd player next week.

alvinthx2 · « **Reply #40 on:** Jun 10, 2006 at 08:35 AM »

Just got hold of my Anthem avm50 yesterday. Waiting for my hd dvd player(maybe tuesday). will calibrate the setup today and post some pictures when they are ready

Munskie · « **Reply #41 on:** Jun 10, 2006 at 09:00 AM »

can't wait sir alvin....can't wait to see what the toshiba hd-dvd can do. Magkanu yepu ikwa ing toshiba yu? ampo pu shipping? pa pm namu pu... thanks. Congrats on your new toys.

alvinthx2 · « **Reply #42 on:** Jun 13, 2006 at 06:27 PM »

The amount of detail over dvd might be around 30% increase in resolution. Dvd playback is already outstanding using the built in Gennum Vpx processor. Just got to watch Apollo 13 (hd dvd) again a few minutes ago.

Munskie · « **Reply #43 on:** Jun 15, 2006 at 12:51 PM »

wow!! unang una to...hd dvd in the ht gallery (locally)....

congrats

jojitv · « **Reply #44 on:** Jun 15, 2006 at 06:58 PM »

This is definitely one of the nicest I've seen so far. Great new toys. Congrats sir.

dayday · « **Reply #45 on:** Jun 16, 2006 at 01:27 PM »

Anthem avm50 -- is this available locally?

alvinthx2 · « **Reply #46 on:** Jun 16, 2006 at 04:43 PM »

Yes. I believe 3 units arrived last week. I was fortunate to get 1 unit. I ordered it 3 weeks ago

dieselsy · « **Reply #47 on:** Jun 17, 2006 at 12:45 PM »

wow

congrats on your new gears!sarap puro hi end .... i met one of your friend joseph,he bot my amp and saw white audio lab amp.

..sarap ciguro manuod dyan

.mre power sir..

alvinthx2 · « **Reply #48 on:** Jun 18, 2006 at 07:08 AM »

Thank you to all for your kind words

Meridian-Audio · « **Reply #49 on:** Jun 18, 2006 at 04:17 PM »

Nice set-up sir.. Jaw dropping talaga..
San mo pala nakuha Anthem & HD-DVD mo sir?
Oo nga pala one of my client using Toshiba HD-DVD XA1 mga 2weeks na & last night bigla nalang nag freeze picture.Problema lang kc dito sa toshiba HD-DVD medyo matagal lang cya mag start meron kcing ROM na kailangan nyang read muna. Kailangan ko bang update software nun sir? 2 times kc nag freeze picture nya.
Kaw sir have u encountered na ba this kind of problem sa Toshiba HD-DVD mo?

alvinthx2 · « **Reply #50 on:** Jun 19, 2006 at 08:04 AM »

Yes, there is a version 1.2 firmware update available that would take 30 minutes to update. I have experience the same with Apollo13 hd dvd. The units are actually linux based 2.5 p4 units. They act like computers that have to boot their OS before you see the picture. There are issues with these machines but it is all worth it when you see REAL HD material.

alvinthx2 · « **Reply #51 on:** Jun 19, 2006 at 08:15 AM »

as to where I got the units:

Avm50 from Audible Illusions

Hd-A1 shipped by my friend from the USA. It is quite heavy pala, mable maga 20 lbs, so medyo mahal shipping.

dayday · « **Reply #52 on:** Jun 19, 2006 at 04:03 PM »

"Audible Illusions"-- where is this please? Thanks

alvinthx2 · « **Reply #53 on:** Jun 19, 2006 at 10:07 PM »

Audible Illusions is at 50d Timog ave. QC besides closed Lexus ktv, 3743620

Meridian-Audio · « **Reply #54 on:** Jun 19, 2006 at 10:13 PM »

Quote from: alvinthx2 on Jun 19, 2006 at 08:15 AM

as to where I got the units:

Avm50 from Audible Illusions

Hd-A1 shipped by my friend from the USA. It is quite heavy pala, mable maga 20 lbs, so medyo mahal shipping.

Hi alvin,
Ganda set-up mo ha. Mas okey cguro kung gamit ka Vidikron Projector as your main display.

Meron kmi 2 recent project using AVM 30, MCA20, & MCA 30, & Paradigm reference speaker as well as Vidikron PJ.
Kc my boss is also a part of Anthem distro here in manila kaya nga I was asking if wer did u get ur anthem.

heheh.. Thumbs up ako sa set up mo sir.. Ganda!!

alvinthx2 · « **Reply #55 on:** Jun 20, 2006 at 08:08 AM »

Actually , I will try it with a Sony Ruby projector next week. The Pj is not mine, it is for a client. still waiting for the holy grail of 1080p projector which is rumored to be released this fall. Actually I am impressed with the quality of the PT ae900 for the price. I have already calibrated it for d65 and the pq is very close to what I have seen several times its price. Almost all high quality PJ have very good D65 color temperature therefore accurated greyscale tracking but if you can tweak the panny 900 or thge Sanyo z4 to track greyscale then you arein for a treat.

ricky · « **Reply #56 on:** Jun 20, 2006 at 09:18 AM »

Sir alvinthx,for me your system is perfect na as it is

and yes the panny pj's are really reasonable pjs to own esp the ae 900

Value for money talaga at a fraction of other high priced units.

when My brother(classmate of ashley btw) saw my ae500 pa ha in action, he told me ok na daw for the price compared to his RANCO unit which cost him $20t

for me its a positive review talaga. Same as you im waiting for the 1080p PJ to come out before thinking of upgrading my ae500. Hope to see your gears in action one of the coming days

Munskie · « **Reply #57 on:** Jun 20, 2006 at 11:21 AM »

Quote from: ricky on Jun 20, 2006 at 09:18 AM

Sir alvinthx,for me your system is perfect na as it is and yes the panny pj's are really reasonable pjs to own esp the ae 900 Value for money talaga at a fraction of other high priced units. when My brother(classmate of ashley btw) saw my ae500 pa ha in action, he told me ok na daw for the price compared to his RANCO unit which cost him $20t for me its a positive review talaga. Same as you im waiting for the 1080p PJ to come out before thinking of upgrading my ae500. Hope to see your gears in action one of the coming days

maybe the successor to panny ae900 will be native 1080p...

what will it be called panny ae1100???

alvinthx2 · « **Reply #58 on:** Jun 20, 2006 at 12:28 PM »

Also guessing, siguro Panasonic 1080? There is a rumor that it will be the Sony "PEARL" with a price of 6000 dollars MSRP. Maybe the street price will be in the range of 4500US. Baka ito kaya ko na.

slowhand · « **Reply #59 on:** Jun 20, 2006 at 12:54 PM »

Panasonic AE1100 1080p for $3.5K will be unveiled at CEDIA, or so the rumors go...