Author Topic: ONKYO AVR (Read 535058 times)

popejerico · « **Reply #4200 on:** Feb 07, 2019 at 01:25 PM »

Anyone experienced Check SP wiring? First time mangyari sa kin to while watching netflix. Lakas ang volume then namatay pagbukas nag check sp na. Then nicheck wala namang prob sa speaker wires. Nihigpitan ko na lang. Now so far mukhang di na lumalabas pero still observing

popejerico · « **Reply #4201 on:** Feb 07, 2019 at 05:09 PM »

Quote from: popejerico on Feb 07, 2019 at 01:25 PM

Anyone experienced Check SP wiring? First time mangyari sa kin to while watching netflix. Lakas ang volume then namatay pagbukas nag check sp na. Then nicheck wala namang prob sa speaker wires. Nihigpitan ko na lang. Now so far mukhang di na lumalabas pero still observing

I was able to fix it. Meron ngang nagdikit na wire not sa ampli itself but on my left front channel. Hehe

mhacman · « **Reply #4202 on:** Feb 07, 2019 at 08:04 PM »

Quote from: popejerico on Feb 07, 2019 at 05:09 PM

I was able to fix it. Meron ngang nagdikit na wire not sa ampli itself but on my left front channel. Hehe

best to use banana plugs for safety's sake... or if AVR/speaker only has the spring clip, either you sold the wire strands or use an interconnects intended for spring clips (forgot how it's called)

buti yun lang naging issue mo, sir... =))

popejerico · « **Reply #4203 on:** Feb 07, 2019 at 10:39 PM »

Yung mga nakakabit sa avr lahat naka banana plugs. Yung sa fronts ang hindi pero bibili na tom lol.

DOM · « **Reply #4204 on:** Aug 08, 2019 at 02:44 PM »

hello onkyo user
good day

rz730 set to bi amp (height speaker LR) and bi wire sa speaker
pag kabitan ko ng external multi channel power amp, then use pre out ng height speaker LR and front speaker LR , ang effect nun naka bi amp and bi wire pa din?

rz730 processor
mc5501 power amp

Onkyo606 · « **Reply #4205 on:** Feb 08, 2020 at 01:13 PM »

Just want to revive this thread.

My close to 9 years old Onkyo 809 acted up a couple of days back. Suddenly lost audio.Tried all possible fixes I can do as video is normal but without sound using all sources including FM tuner. I was forced to do the hard reset twice but still no sound. I tried doing Audyssey set up but its not working anymore.

It looks like it needs serious repair already that will cost me a lot.

Sent from my INE-LX2 using Tapatalk

mhacman · « **Reply #4206 on:** Feb 09, 2020 at 12:04 AM »

wow! close to 9yrs shouldn't be bad at all... have it still diagnosed and estimated sir, malay mo hindi naman pala ganun kamahalan ipa-ayos..

goodluck with the repairs, sir! balitaan mo kami =)

Onkyo606 · « **Reply #4207 on:** Feb 09, 2020 at 02:42 AM »

Quote from: mhacman on Feb 09, 2020 at 12:04 AM

wow! close to 9yrs shouldn't be bad at all... have it still diagnosed and estimated sir, malay mo hindi naman pala ganun kamahalan ipa-ayos..

goodluck with the repairs, sir! balitaan mo kami =)

Never gave me any problem except when I needed to replace the HDMI cables. I got it for 41k when it was being sold locally for around 70k I think. The sad part is I can not afford to buy an equivalent model anymore,which I believe is the RZ 8 series

Sent from my INE-LX2 using Tapatalk

Weng! · « **Reply #4208 on:** Feb 09, 2020 at 01:42 PM »

my 9-yr old onkyo 818 broke down last dec. the sound setting keeps on scrolling and won't stop. mabuti nalang nagamit ko ang denon 2308 na lampas ng 5 yrs ng nakatago sa cabinet. pansin ko na mas maganda ang sound ng denon kesa onyo kaso hindi pa capable to process dolby truHD at dts.

i sent the 818 for repair in cebu. mabuti naayos naman, pinalitan lang ang mga tac switches na nag stuck.

also, a friend informed me na may 818 recall sa US na pwede mag avail ng discounted 8 and 9 series models. i still have until march 2020 to decide if i'm going to avail this offer. onkyo only needs the serial no and no need to return the receiver.

Onkyo606 · « **Reply #4209 on:** Feb 09, 2020 at 04:08 PM »

Good news for you Weng.

All 809s manufactured from 2009 to 2012 was acknowledged by Onkyo to be problematic, having the same problem of losing sound. Onkyo offered I think to repair for free(to be sent to the US) up until Dec 2018. Sad that the RZ 840 is at least 60k something I cant shell out anymore.

Sent from my INE-LX2 using Tapatalk

Weng! · « **Reply #4210 on:** Feb 09, 2020 at 05:47 PM »

bro tirso,

try to log on your 809's serial no and see if it is included in the trade-in program.

https://care.onkyousa.com/na/003_2012.php?country=USA

Onkyo606 · « **Reply #4211 on:** Feb 09, 2020 at 06:40 PM »

Quote from: Weng! on Feb 09, 2020 at 05:47 PM

bro tirso,

try to log on your 809's serial no and see if it is included in the trade-in program.

https://care.onkyousa.com/na/003_2012.php?country=USA

Thank you!! Will try this.

Sent from my INE-LX2 using Tapatalk

Onkyo606 · « **Reply #4212 on:** Feb 10, 2020 at 10:29 AM »

Quote from: Weng! on Feb 09, 2020 at 05:47 PM

bro tirso,

try to log on your 809's serial no and see if it is included in the trade-in program.

https://care.onkyousa.com/na/003_2012.php?country=USA

Not found ang lumalabas.

Sent from my INE-LX2 using Tapatalk

JoeyGS · « **Reply #4213 on:** Feb 24, 2020 at 02:19 PM »

I have a friend who just had his 809 repaired in Toyama .... changed the problematic HDMI board and update the firmware .... Repair cost is P14k. With the stock HDMI board, the sound chip overheats.

At first, the cost seemed too much but when we heard the sound after the repair and it's like it was upgraded to the next level. The amp became more controlled and still authoritative. We enjoyed watching concerts with this amp. Also, the HDMI board does not run hot as it used to.

Quote from: Onkyo606 on Feb 10, 2020 at 10:29 AM

Not found ang lumalabas.

Sent from my INE-LX2 using Tapatalk

JoeyGS · « **Reply #4214 on:** Feb 24, 2020 at 02:21 PM »

Also, another tip on the 809, don't let dust gather on the HDMI board as this also causes it to malfunction. The HDMI board is located on top next to the casing grill.

Onkyo606 · « **Reply #4215 on:** Feb 24, 2020 at 04:03 PM »

in my case di ko alam kung hdmi board. wala akong issue with the video for all sources. yung cd player ko naka connect sa coaxial cable pero wala ding audio kahit sa direct or pure audio setting, yung ipad naka connect sa rca ports sa harap wala ding tunog. after doing the reset ayaw ng tumuloy ng audyssey

Sent from my INE-LX2 using Tapatalk

yygoob · « **Reply #4216 on:** Feb 27, 2020 at 01:33 PM »

san yang toyorama? had my 5009 fix sa onkyo service center sa may west ave...napagana yung receiver pero hindi completely na ayos nawala ang audysey ....at only a few hdmi were working....now it would turn on but no sound...worth pa ba ipaayos ito? thanks

Onkyo606 · « **Reply #4217 on:** Feb 27, 2020 at 03:05 PM »

Quote from: yygoob on Feb 27, 2020 at 01:33 PM

san yang toyorama? had my 5009 fix sa onkyo service center sa may west ave...napagana yung receiver pero hindi completely na ayos nawala ang audysey ....at only a few hdmi were working....now it would turn on but no sound...worth pa ba ipaayos ito? thanks

Yan yung Toyama yan ang service center ng Onkyo. Yung isang kaibigan ni refer ako sa tech na Toyama na magaling daw gumawa 4k ang singil sa akin labor and materials baka sa Sunday ko pa home service.

Sent from my INE-LX2 using Tapatalk

Onkyo606 · « **Reply #4218 on:** Feb 27, 2020 at 03:07 PM »

Kahit high end unit nagkaka problema din.Tama si Mike C I should only get the cheapest that does the job.

Sent from my INE-LX2 using Tapatalk

JoeyGS · « **Reply #4219 on:** Mar 02, 2020 at 09:36 AM »

The HDMI boars also handle the audio I/O of the receiver. In the case of my friend, wala din problema yung video. Nawala din yung audio niya and after the board replacement and firmware upgrade ok na yung unit niya.

Quote from: Onkyo606 on Feb 24, 2020 at 04:03 PM

in my case di ko alam kung hdmi board. wala akong issue with the video for all sources. yung cd player ko naka connect sa coaxial cable pero wala ding audio kahit sa direct or pure audio setting, yung ipad naka connect sa rca ports sa harap wala ding tunog. after doing the reset ayaw ng tumuloy ng audyssey

Sent from my INE-LX2 using Tapatalk

kontador · « **Reply #4220 on:** Mar 02, 2020 at 02:10 PM »

Quote from: Onkyo606 on Feb 27, 2020 at 03:05 PM

Yan yung Toyama yan ang service center ng Onkyo. Yung isang kaibigan ni refer ako sa tech na Toyama na magaling daw gumawa 4k ang singil sa akin labor and materials baka sa Sunday ko pa home service.

Sent from my INE-LX2 using Tapatalk

bga issue, palit hdmi board , reballing or change the chipset with DTS logo on top
palit hdmi board very expensive just buy a second hand avr with upgraded features
reballing without changing the chipset just a temporarily fix it will only last 1 to 2 years

Onkyo606 · « **Reply #4221 on:** Mar 02, 2020 at 04:36 PM »

Quote from: kontador on Mar 02, 2020 at 02:10 PM

HDMI board replacement around 15k daw. The RZ 840, which is the current equivalent of the 809 is around 63k. Both I can not afford at the moment.

Sent from my INE-LX2 using Tapatalk

Pipo_1925 · « **Reply #4222 on:** Mar 08, 2020 at 12:01 AM »

Mga sir,

Question regarding no sound using ARC sa Onkyo 393. Ang connection ko is Receiver(ARC) to TV(ARC). Naka on yung ARC sa amp and yung audio ko sa tv is ARC rin ang pinili ko. hdmi 2.0 cable ang gamit ko.

Jason_10 · « **Reply #4223 on:** May 01, 2020 at 10:06 PM »

^have you enabled the ARC feature sa TV audio settings? sometimes its the hdmi connection. try to use another cable to isolate.

van_xer · « **Reply #4224 on:** Jul 11, 2020 at 04:01 PM »

My 686 sddenly sparked and stop.working my burnt smell after
It was plugged in a voltage regulator tho
Where can i have this fixed thanks guys

Pipo_1925 · « **Reply #4225 on:** Jul 11, 2020 at 04:29 PM »

Quote from: van_xer on Jul 11, 2020 at 04:01 PM

My 686 sddenly sparked and stop.working my burnt smell after
It was plugged in a voltage regulator tho
Where can i have this fixed thanks guys

Onkyo Service Center

G/F The West Wing Building, 107 West Ave, Quezon City, 1105 Metro Manila
(02) 8374 8669

Or try mo sa nearest electrician na kilala mo bro

van_xer · « **Reply #4226 on:** Aug 10, 2020 at 09:28 PM »

Copyq

silent_loud21 · « **Reply #4227 on:** Feb 03, 2021 at 11:17 AM »

I have plan on buying a second hand onkyo trsr602 receiver, only problem it doesn't have a remote control.
Is it possible all the function can be done manually on the panel.

synchro_01 · « **Reply #4228 on:** Feb 03, 2021 at 02:03 PM »

Quote from: silent_loud21 on Feb 03, 2021 at 11:17 AM

I have plan on buying a second hand onkyo trsr602 receiver, only problem it doesn't have a remote control.
Is it possible all the function can be done manually on the panel.

Setting it up yes but its a pain to do so using the front panel controls. Better get a replacement from Lazada. Its just around 300 bucks. Just adjusting the volume while you are comfortable in your chair will make the investment worth it. Onkyo remotes will work with different models. Just get the one that is within the model range (6xx series)

Julia · « **Reply #4229 on:** Aug 08, 2021 at 10:40 PM »

Good Evening po! My Onkyo TX-NR609 had this check SP wire message sa panel. Have removed all the speaker cables and still when I power on, same check SP wire message. Any DIY you would recommend?

TIA!