Author Topic: ONKYO AVR (Read 538623 times)

Onkyo606 · « **Reply #1380 on:** Apr 28, 2010 at 02:58 AM »

Quote from: Beefy on Apr 27, 2010 at 10:49 PM

SQ? I can't really say since I haven't compared it to a different receiver of the SAME wattage. If I remember correctly, the 507 is 75watts/ch. It's probably ok for satellites.

I replaced it with a denon 1910 which to me, sounded "cleaner/softer" to the ear and had more impact/punch than the 507. Probably due to the higher wattage.

the 507 is not comparale to the 1910 actually as 1910 is already in the middle of the pack, this is actually pitted agains 606/607 and yammy 663, the four more or less have the same features wiht plus or minueses over the other

for a starter, the 507 is not a bad receiver specially if your not into those upscaling thing, even using floor staders or bs, the 507 will not dissapoint, you just need to get speakers that has a higehr sensitivity, atleast the way i understood thing as people are saying 90db sensitivity are easiser to drive( iwould have to leave response to further query on this to our HT gurus as as i can not go deeper in the explanation anymore). if your room is not that big and is working on a budget, then 507 is the way to go but if you have an extra juice to extract, you may want to consider the 606, 607 price range is from around 30k to 32 k perhaps. the post above for sale the 605 is actaully a very good option,the 507 would only cost as much. by the way, if you will try to reaserach, you would see that the Onkyo605 is one of the most sough after eceiver when it was relased getting 5 start rating and product of the year award from hat hifi magazine. you might want to pm or call the seller and give it an audition.

good luck on yor hunt

Beefy · « **Reply #1381 on:** Apr 28, 2010 at 12:31 PM »

Based on my experience, speaker sensitivity doesn't really matter when matching components. Even if one speaker has a higher sensitivity over the other, I'd still pick an amp that will overpower or at least match the maximum RMS rating of the driver to get the most out of it.

Every speaker has it's own distinct sound. Speaker A (sensitivity 92db) may sound louder vs Speaker B (senistivity 86db) off a 75 watt amp but, louder doesn't necessarily equate to being better.

Levijones · « **Reply #1382 on:** Apr 28, 2010 at 04:00 PM »

Quote from: Beefy on Apr 27, 2010 at 10:49 PM

SQ? I can't really say since I haven't compared it to a different receiver of the SAME wattage. If I remember correctly, the 507 is 75watts/ch. It's probably ok for satellites.

I replaced it with a denon 1910 which to me, sounded "cleaner/softer" to the ear and had more impact/punch than the 507. Probably due to the higher wattage.

Hi Beefy, may I ask what speakers you were driving with the 507, which sounded better with the 1910? The 1910 is rated at 90 watts per channel (versus 75 watts for the 507). Looks like the 15-watt difference does have some impact.

Beefy · « **Reply #1383 on:** Apr 28, 2010 at 06:56 PM »

I'm using energy speakers rated at 100 watts RMS. The 15 watt difference had a really noticable difference, but then again, it was a different receiver. I could have given a better conclusion if I changed to a higher wattage AVR of the same brand.

Levijones · « **Reply #1384 on:** Apr 28, 2010 at 08:46 PM »

^^ I see.. ok got it. Thank you.

Blu-devil · « **Reply #1385 on:** Apr 28, 2010 at 11:58 PM »

Will the 608 Matrix Hi-Def audio from 5.1 to 7.1 The 605 could not, can the 608?

Beefy · « **Reply #1386 on:** Apr 29, 2010 at 12:53 AM »

The 608's aren't out yet locally. Are you talking about the Dolby PLIIx? I don't see why not

Blu-devil · « **Reply #1387 on:** Apr 30, 2010 at 11:09 PM »

The 605 has dplIIx but cannot matrix lossless audio. I believe THX Select2 can add surround back channels to lossless audio.

Blu-devil · « **Reply #1388 on:** May 01, 2010 at 09:16 PM »

I have an Onkyo TX-SR605 in mint condition. Tel/ txt 0916 239 6349

nogie · « **Reply #1389 on:** May 02, 2010 at 12:25 PM »

Now that my stash of AVRs are almost gone, i just took a bite on the older onkyo 875 over the newer but lower model onkyo rc-180. Im always a believer that older but higher model would perform better than the new but lower models. The 875 is only a few bucks expensive than rc-180. I guess I wouldnt need the new dolby PLz because most of my movies are encoded in DTS, DD & lossless codecs thru blu-ray disc. Kaya lang darating pa lang one-month from now. Excited na ako.

Onkyo606 · « **Reply #1390 on:** May 02, 2010 at 09:46 PM »

Quote from: nogie on May 02, 2010 at 12:25 PM

Now that my stash of AVRs are almost gone, i just took a bite on the older onkyo 875 over the newer but lower model onkyo rc-180. Im always a believer that older but higher model would perform better than the new but lower models. The 875 is only a few bucks expensive than rc-180. I guess I wouldnt need the new dolby PLz because most of my movies are encoded in DTS, DD & lossless codecs thru blu-ray disc. Kaya lang darating pa lang one-month from now. Excited na ako.

being an owner of the HT RC180, the best feature I like about this is actually the Audyssey DSX, although magastos nga lang because you need to get at least 7 speakers, 5 of them sa front namely the front, the front wide and the center. at syempre it cost lower

with reference sa binanggit ni brader raul(nogie) the 875 is mean becasue of the power it has not to mention its ULTRA2 THX certified versus mine that is a tad lower, select 2 certified only.

congrats sir raul sa bagong padating

nogie · « **Reply #1391 on:** May 02, 2010 at 11:29 PM »

^ I'm inclined to get the RC-180 pero nakatsamba yong brod ko ng open box na 875 na halos parehas ang presyo. I'm always longing for this mean receiver if I can get it at the right price. Ayun nakatsamba sa wakas. I hope i made the right decision.

Onkyo606 · « **Reply #1392 on:** May 02, 2010 at 11:43 PM »

Quote from: nogie on May 02, 2010 at 11:29 PM

^ I'm inclined to get the RC-180 pero nakatsamba yong brod ko ng open box na 875 na halos parehas ang presyo. I'm always longing for this mean receiver if I can get it at the right price. Ayun nakatsamba sa wakas. I hope i made the right decision.

you will never go wrong with the 875 brader raul. this is where preference would come in, i have been fascinated with the dsx set up since hearing it so i made the right decision i getting the 180, in your case, you have always been fascinated by the pwoer of the amp side and the less compliction so the 875 suite your preference well., the 875 packs power and has some features that are not present sa 180 plus i like the fascia design, it looks meaner that the new models of onkyo 180, 807 up to the TOTL 5007 all look the same and i like the way 875 looks way better than the rest

dips15 · « **Reply #1393 on:** May 06, 2010 at 03:48 PM »

When will the 08 models come out? It was recently released in the US and I think, Singapore. Some AV stores don't have stocks of the 607 anymore and are suggesting to wait for the 608. Hopefully will be released in our market soon.

Blu-devil · « **Reply #1394 on:** May 07, 2010 at 12:23 AM »

I'm looking to pick up the 608 when I visit Hong Kong next month, possibly also the Optoma HD66 3D Projector.

dips15 · « **Reply #1395 on:** May 08, 2010 at 08:38 AM »

Quote from: Blu-devil on May 07, 2010 at 12:23 AM

I'm looking to pick up the 608 when I visit Hong Kong next month, possibly also the Optoma HD66 3D Projector.

Are AVRs cheaper in HK?

gunslinger · « **Reply #1396 on:** May 08, 2010 at 05:39 PM »

Di ko na na-antay yung 08 models. Pulled the trigger and got the HK160 instead. Sana hindi ako magsisi. hehehehe

phipsi1 · « **Reply #1397 on:** May 10, 2010 at 08:02 PM »

Quick technical question to all. The Onkyo 807 was benchmarked and these were the following results:

HT Labs Measures
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 105.5 watts
1% distortion at 122.0 watts

Since my RX speakers are a 6-ohm load, what could I assume would be the wpc output for five channels driven continuously for 6 ohms?

Blu-devil · « **Reply #1398 on:** May 17, 2010 at 10:18 PM »

Quote from: dips15 on May 08, 2010 at 08:38 AM

Are AVRs cheaper in HK?

Basically anywhere is cheaper than Philippines. Prices here are a joke. 38k for an Onkyo 607.

pchin · « **Reply #1399 on:** May 17, 2010 at 10:36 PM »

Quote from: Blu-devil on May 17, 2010 at 10:18 PM

Basically anywhere is cheaper than Philippines. Prices here are a joke. 38k for an Onkyo 607.

Very true!

HK is an AV shopping paradise.

avshop · « **Reply #1400 on:** May 17, 2010 at 11:42 PM »

Quote from: pchin on May 17, 2010 at 10:36 PM

Very true!

HK is an AV shopping paradise.

You just have to worry about warranty issues.

avshop · « **Reply #1401 on:** May 17, 2010 at 11:44 PM »

Quote from: Blu-devil on May 17, 2010 at 10:18 PM

Basically anywhere is cheaper than Philippines. Prices here are a joke. 38k for an Onkyo 607.

I can sell you an Onkyo 607 for only 29k. Brand new with 1 year local warranty.

pchin · « **Reply #1402 on:** May 17, 2010 at 11:54 PM »

Quote from: avshop on May 17, 2010 at 11:42 PM

You just have to worry about warranty issues.

That's also true... there's pro & con for each situation. For some buyers the added cost for peace of mind is certainly worth it.

dips15 · « **Reply #1403 on:** May 18, 2010 at 07:18 AM »

Quote from: Blu-devil on May 17, 2010 at 10:18 PM

Basically anywhere is cheaper than Philippines. Prices here are a joke. 38k for an Onkyo 607.

Where did anyone quote 38k for the 607? Note that most prices initially given by shops are SRP. They would be subject to 10-20 percent discount at most audio video shops. The 606 and the 607 has always been at the 28-30k range @ cash.

Weng! · « **Reply #1404 on:** May 18, 2010 at 07:59 AM »

Quote from: dips15 on May 08, 2010 at 08:38 AM

Are AVRs cheaper in HK?

yes, way way cheaper.

got a denon 2308 from HK when it just came out (sep. '08) at 26k equiv while it cost 43k at that time sa mga suking tindahan

nogie · « **Reply #1405 on:** May 18, 2010 at 08:25 AM »

^
How about the vultures waiting at the airport? How are you going to hide that humongous box when you enter the vultures den?

dips15 · « **Reply #1406 on:** May 18, 2010 at 10:14 AM »

Quote from: GneW on May 18, 2010 at 07:59 AM

yes, way way cheaper.

got a denon 2308 from HK when it just came out (sep. '08) at 26k equiv while it cost 43k at that time sa mga suking tindahan

Wow that's definitely worth looking at. Magkano kaya ang 608 sa kanila?

wacksy1021 · « **Reply #1407 on:** May 18, 2010 at 10:17 PM »

available na ba sa pinas yung mga bagong models sirs?

Blu-devil · « **Reply #1408 on:** May 18, 2010 at 11:33 PM »

Wife is buying me the Onkyo 608 in Hong Kong in return I buy her an iPad. I would rather purchase a HK model TBH. My HK 605 came with full Asia warranty. From what I have experienced, Philippines warranties are not worth wiping your butt crack with. Just need to confirm that the 608 will matrix Loss less audio.

dips15 · « **Reply #1409 on:** May 19, 2010 at 12:25 AM »

Quote from: Blu-devil on May 18, 2010 at 11:33 PM

Wife is buying me the Onkyo 608 in Hong Kong in return I buy her an iPad. I would rather purchase a HK model TBH. My HK 605 came with full Asia warranty. From what I have experienced, Philippines warranties are not worth wiping your butt crack with. Just need to confirm that the 608 will matrix Loss less audio.

You have any idea how much the 608 will be in HK? How do you plan to ship it back to manila? Di ba medyo mabigat yan for air freight? Am thinking about going to HK too.