na-set mo na ba yung max volume nya?
How do you do that? The only thing I've set on the AVR so far with regard to volume is to set the levels per channel. I have so far set it to the maximum (+12) for FR FL and center.
You need to calibrate your system so that the channel levels are set up properly. The simplest way to do that is by running Audyssey MultEQ on your AVR.
Is your problem "weak dialogue?" Can you describe where exactly you have located the center speaker?
I'll try to find time to run Audyssey. Its not just weak dialogue. As mentioned, this is more apparent on divx/xvid .avi files which only has stereo sound. Tried watching American Idol and volume was weak compared to when I connected the same NMT to my HTIB (both through coax). Since it was in stereo, center channel was not used. But I do have the same problem to a lesser degree on 5.1 DTS files. Still weaker on my Denon than on my HTIB. Similar problem even when connected to a DVD player via coaxial cable.
Don't have the same problem for 2 channel audio listening though. Volume seems fine when listening to audio CDs. Even mp3s played from the NMT sounds ok.
try calibrating it using audyssey .
also how do you connect your source to the receiver?
NMT is connected via HDMI for video and coaxial for audio. Tried using a PS3 which is connected via HDMI for video and optical for audio with the same results. DVD player I used was connected via component and coaxial.
Problem is actually not that bad. Just find it weird that I have to crank it up to maximum to get audible to desireable volume. Action scenes and explosion scenes are still quite loud though that I have to lower the volume. My parents' sala is much larger than my current room and just uses an old entry level onkyo avr (3 series) with b&w 302s and as far as I remember, we don't crank it up that high.