Author Topic: Yamaha Receivers (Read 400939 times)

Courage · « **Reply #3270 on:** Jul 14, 2011 at 10:19 PM »

Quote from: j0hans0n on Jul 12, 2011 at 07:05 PM

Hey guys,

I have an rxv357 receiver, connected to my pc through coaxial cable. and the volume fluctuates while playing mkv movies but not audio files (i need to double check). I also tried it with an eGreat R200 Pro through HDMI and it still happens.

With plain tv audio it is ok as well.

Setup: 2.0 floorstanding speakers

what could be the culprit to my problem?

Thanks.

Fluctuates meaning himihina then lumalakas? Or nawawala and bumabalik yung sound?

j0hans0n · « **Reply #3271 on:** Jul 15, 2011 at 12:38 AM »

Quote from: Courage on Jul 14, 2011 at 10:19 PM

Fluctuates meaning himihina then lumalakas? Or nawawala and bumabalik yung sound?

Sir Courage,

humihina then lumalakas po.

Courage · « **Reply #3272 on:** Jul 15, 2011 at 12:41 AM »

Quote from: j0hans0n on Jul 15, 2011 at 12:38 AM

Sir Courage,

humihina then lumalakas po.

Can you try connecting the R200 via Stereo analog connection to your receiver and try again if mag fluctuate pa?

Cosmic79 · « **Reply #3273 on:** Jul 15, 2011 at 03:51 AM »

Mayroon ako Yamaha 467 also connected sa computer via RCA analog. With movies and music stable naman ang sound. 5.1 or stereo ok naman. Naka enable ba ang DSP parameter mo? Naka turn off sa akin.

j0hans0n · « **Reply #3274 on:** Jul 19, 2011 at 08:56 PM »

Quote from: Cosmic79 on Jul 15, 2011 at 03:51 AM

Mayroon ako Yamaha 467 also connected sa computer via RCA analog. With movies and music stable naman ang sound. 5.1 or stereo ok naman. Naka enable ba ang DSP parameter mo? Naka turn off sa akin.

dsp, if you mean by concert hall, cinema, etc modes. i set it at "Stereo". RCA/Analog from tv is ok. i only have stereo speakers and no 5.1. have you experienced movies through stereo?

Quote from: Courage on Jul 15, 2011 at 12:41 AM

Can you try connecting the R200 via Stereo analog connection to your receiver and try again if mag fluctuate pa?

Sir courage, not necessarily R200pro yung gamit kong player. Since I bought that for my father and i just borrowed it to watch a movie or two. my main player/concern is a pc connected to my tv with a 12 meter coaxial cable for digital audio and 15 meter cable for vga.

Perhaps I need an AVR for my devices? Does volume fluctuate with voltage too? Thanks.

barrister · « **Reply #3275 on:** Aug 06, 2011 at 04:36 PM »

Replacing the RX-V667:

Yamaha RX-V671

With Internet Radio; with Front panel USB Digital Connection for iPod and iPhone; but pre-outs removed.

Reviews:

http://www.audioholics.com/reviews/receivers/yamaha-rx-v671-fl
http://reviews.cnet.com/av-receivers/yamaha-rx-v671/4505-6466_7-34533968.html#reviewPage1

Stagea · « **Reply #3276 on:** Aug 07, 2011 at 05:04 AM »

The Yamaha R-S models are now available through 5th Ave / Avesco, afaik. I saw them on display.

lithium_deuteride · « **Reply #3277 on:** Aug 07, 2011 at 09:31 AM »

Any word if they will sell the RX-AXXXX series here?

Stagea · « **Reply #3278 on:** Aug 07, 2011 at 09:53 AM »

Quote from: lithium_deuteride on Aug 07, 2011 at 09:31 AM

Any word if they will sell the RX-AXXXX series here?

The Aventage (RX-A) models have local equivalents, falling under the RX-V nomenclature.

fredmontano · « **Reply #3279 on:** Aug 07, 2011 at 03:58 PM »

Just bought the rx v371. Pansin ko lang parang oversaturated yung color pagpinapadaan sa avr yung hdmi signal from xtreamer then sa lcd tv via hdmi out.

van_xer · « **Reply #3280 on:** Aug 13, 2011 at 09:28 PM »

Ok ba yamaha avr for infinity primus?

Stagea · « **Reply #3281 on:** Aug 14, 2011 at 03:21 AM »

Quote from: fredmontano on Aug 07, 2011 at 03:58 PM

Just bought the rx v371. Pansin ko lang parang oversaturated yung color pagpinapadaan sa avr yung hdmi signal from xtreamer then sa lcd tv via hdmi out.

That shouldn't be the case, since the rx-v371 does not do video processing.

Stagea · « **Reply #3282 on:** Aug 14, 2011 at 03:36 AM »

Quote from: van_xer on Aug 13, 2011 at 09:28 PM

Ok ba yamaha avr for infinity primus?

Doable, especially with newer Yamahas. Try them together, to see if it works for you.

paramount · « **Reply #3283 on:** Aug 15, 2011 at 10:04 PM »

Hi, I have RX567 and M&S carnivals, question Lang po, why is it when I play audio CDs the SW is deactivated, is there a way para to have it applied in music as well para may knotting bass. Sorry if noob question but hope some answers here... Thanks!

jhelenz · « **Reply #3284 on:** Aug 15, 2011 at 11:11 PM »

Quote from: paramount on Aug 15, 2011 at 10:04 PM

Hi, I have RX567 and M&S carnivals, question Lang po, why is it when I play audio CDs the SW is deactivated, is there a way para to have it applied in music as well para may knotting bass. Sorry if noob question but hope some answers here... Thanks!

anong seting ang ginagamit mo when playing cd's?kapag naka pure direct ka na didisable talaga yung sub.

Stagea · « **Reply #3285 on:** Aug 15, 2011 at 11:22 PM »

Quote from: jhelenz on Aug 15, 2011 at 11:11 PM

anong seting ang ginagamit mo when playing cd's?kapag naka pure direct ka na didisable talaga yung sub.

Or if naka Large yung front L/R.

paramount · « **Reply #3286 on:** Aug 16, 2011 at 06:05 AM »

Thanks, made adjustments on the front L/R, the sub is now working, last question, is it advisable to set all speakers (center and rear) to small as well? Or just leave it as large? Thanks again po...

jhelenz · « **Reply #3287 on:** Aug 16, 2011 at 07:09 AM »

Quote from: paramount on Aug 16, 2011 at 06:05 AM

Thanks, made adjustments on the front L/R, the sub is now working, last question, is it advisable to set all speakers (center and rear) to small as well? Or just leave it as large? Thanks again po...

it depends on your speakers.when i still have my wharf 9cm,i set it to large and my 9.1 rears to small.

Stagea · « **Reply #3288 on:** Aug 16, 2011 at 12:27 PM »

Quote from: paramount on Aug 16, 2011 at 06:05 AM

Thanks, made adjustments on the front L/R, the sub is now working, last question, is it advisable to set all speakers (center and rear) to small as well? Or just leave it as large? Thanks again po...

What sub are you using? Are you using the Carnival 5 Center and Carnival 3 Surrounds?

If so, try putting all your speakers to Small (see if it works better for you). You can start by crossing the Carnival 8s at around 60Hz, and both Carnival 5s and Carnival 3s at 80Hz. You can do tweaks from there (or try the YPAO setup).

paramount · « **Reply #3289 on:** Aug 16, 2011 at 09:24 PM »

Will do and try thanks again! Really appreciate it.

Courage · « **Reply #3290 on:** Aug 16, 2011 at 09:52 PM »

Quote from: paramount on Aug 16, 2011 at 06:05 AM

Thanks, made adjustments on the front L/R, the sub is now working, last question, is it advisable to set all speakers (center and rear) to small as well? Or just leave it as large? Thanks again po...

It depends.. all my speakers are set to small except for the center.. Mas full yung sound nang center ko pag naka large sya vs naka small...Others might find it different though...You can always test and listen...

paramount · « **Reply #3291 on:** Aug 21, 2011 at 08:16 AM »

hi, sorry need one more advice, what is the best set up for sub, normal or reverse, currently i have it as normal in amp and set at 0 in the sub. btw my cross freq is set at 100. is this ok? thanks again.

Stagea · « **Reply #3292 on:** Aug 21, 2011 at 09:15 AM »

Quote from: paramount on Aug 21, 2011 at 08:16 AM

hi, sorry need one more advice, what is the best set up for sub, normal or reverse, currently i have it as normal in amp and set at 0 in the sub. btw my cross freq is set at 100. is this ok? thanks again.

Normal or reverse is just the phase setting of the sub. In the very simplest terms: Set it to where it sounds louder, as that is where it more-or-less runs in-phase with the other speakers.

If you have doubts, run the YPAO setup.

pilyo168 · « **Reply #3293 on:** Aug 24, 2011 at 04:14 PM »

Quote from: Stagea on Aug 21, 2011 at 09:15 AM

Normal or reverse is just the phase setting of the sub. In the very simplest terms: Set it to where it sounds louder, as that is where it more-or-less runs in-phase with the other speakers.

If you have doubts, run the YPAO setup.

Galing naman ikaw lang talaga master ivan nasagot sa lahat ng Q&A dito. Kung may karma rating lang dito higit pa siguro number ng post mo ang thumbs up.

Stagea · « **Reply #3294 on:** Aug 25, 2011 at 03:58 PM »

Quote from: pilyo168 on Aug 24, 2011 at 04:14 PM

Galing naman ikaw lang talaga master ivan nasagot sa lahat ng Q&A dito. Kung may karma rating lang dito higit pa siguro number ng post mo ang thumbs up.

Loko ka Master Marco.

Nagtatry lang po tumulong pag may oras.

timtim15 · « **Reply #3295 on:** Sep 24, 2011 at 04:00 AM »

sirs, can i use the YPAO mic from other yamaha receiver? eg yamaha rxv 1800 to rxv 1400? nawala kasi yung mic ko.

TIA

jhelenz · « **Reply #3296 on:** Sep 25, 2011 at 01:29 AM »

Quote from: timtim15 on Sep 24, 2011 at 04:00 AM

sirs, can i use the YPAO mic from other yamaha receiver? eg yamaha rxv 1800 to rxv 1400? nawala kasi yung mic ko.

TIA

there is no harm in trying.i tried a yamaha rxv 657 ypao mic to a yamaha rxv 1400 gumana naman

kristan · « **Reply #3297 on:** Sep 26, 2011 at 08:46 PM »

Hi,

I'm a noob sa mga receivers.. tanong ko lang kung gumagana yung crossover/subwoofer out kahit analog stereo yung input?

Thanks

Stagea · « **Reply #3298 on:** Sep 26, 2011 at 10:53 PM »

Quote from: kristan on Sep 26, 2011 at 08:46 PM

Hi,

I'm a noob sa mga receivers.. tanong ko lang kung gumagana yung crossover/subwoofer out kahit analog stereo yung input?

Thanks

In most cases, yes. Sa Yamaha AVRs (since asa Yamaha thread tayo), it gets bypassed when you select Direct. For other modes, gumagana siya.

timtim15 · « **Reply #3299 on:** Sep 26, 2011 at 11:02 PM »

Quote from: jhelenz on Sep 25, 2011 at 01:29 AM

there is no harm in trying.i tried a yamaha rxv 657 ypao mic to a yamaha rxv 1400 gumana naman

Sweet! Thank you sir