Topic: Yamaha Receivers

[cookies]

Hi sir,
May problema po itong yamaha rx-v595 A ko, baka meron kayong alam na service center or repair shop dito sa Paranaque or La Pinas area. Previously ayaw gumana yung left main channel, i had it repaired by an electronic shop, pero lalong lumaki ang sira.
I hope you can recommend one good repair shop for Yamaha receivers.

Salamat po.

[Cosmic79]

Hi sir,
May problema po itong yamaha rx-v595 A ko, baka meron kayong alam na service center or repair shop dito sa Paranaque or La Pinas area. Previously ayaw gumana yung left main channel, i had it repaired by an electronic shop, pero lalong lumaki ang sira.
I hope you can recommend one good repair shop for Yamaha receivers.

Salamat po.

Try to inquire at 5th Avenue if they can repair your Yamaha. They are the distributor of Yamaha products. However, sa pagka alam ko wala ata silang branch sa Paranaque. Nearest would be the Ayala Park Square branch.

5TH Avenue: PARK SQUARE - I
Stall P09 Park Square-1 Ayala Center, Makati
Telephone Number: + 63 (2) 817-8756 to 58
Email Address: [email protected]

[olrac]

hi im using an old yamaha RX-V795 and would like to ask if it is possible to use YPAO mic for calibration.  Ive been searching the net but cant find any exact results if i can use YPAO with RX-V795.

Thanks.

[barrister]

hi im using an old yamaha RX-V795 and would like to ask if it is possible to use YPAO mic for calibration.  Ive been searching the net but cant find any exact results if i can use YPAO with RX-V795.

No, you can't use the YPAO mic on an RX-V795.

The unit must be YPAO-capable before a YPAO mic can be used.  The RX-V795 is not YPAO-capable, and is not capable of any type of automatic calibration via omnidirectional microphone.

It was only in November 2003 that YPAO was introduced by Yamaha, when the $4,500 flagship Yamaha RX-Z9 featured it for the first time.

The RX-V795 is a 1998 model.

[olrac]

thanks sir barrister...just need to do some manual calibration then

[jackryan]

what is the difference between the Aventage 2000 versus the Aventage 2010? TIA!

[Courage]

what is the difference between the Aventage 2000 versus the Aventage 2010? TIA!

Major is 7.2 ang RX-A2000 then 9.2 na ang RX-A2010

A2010 is 10 watts Higher( 130watts vs 140watts)
On A2010 you have the option to turn off yung OSD sa TV sa A2000 wala
A2010 is a little heavier than A2000

Rest are same

[≧◉◡◉≦xrampage≧◉◡◉≦]

Lols bat mo quote ulet. 

[Courage]

Lols bat mo quote ulet. 

Oo nga no, didnt know why ha ha ha delete ko na lang..

[socko888]

hello peeps,

I bought a YHT S401BL sound bar with integrated receiver+subwoofer from Amazon. The problem is ayaw mag power on yung receiver. The unit is 120v 60hz and i plugged it into a 110v power source from AVR. I'm not sure if this is a factor. Can anyone tell me what seems to be the problem, if I can fix it myself, and which center here in Manila can fix it properly? Thanks.

[jackryan]

Major is 7.2 ang RX-A2000 then 9.2 na ang RX-A2010

A2010 is 10 watts Higher( 130watts vs 140watts)
On A2010 you have the option to turn off yung OSD sa TV sa A2000 wala
A2010 is a little heavier than A2000

Rest are same

thanks bro... is the capability to use 9.2 channels all using the internal powered amp of the RX-A2010? I don't understand fully the indication that I need to use an external amp to enable 9.2.

[jackryan]

hello peeps,

I bought a YHT S401BL sound bar with integrated receiver+subwoofer from Amazon. The problem is ayaw mag power on yung receiver. The unit is 120v 60hz and i plugged it into a 110v power source from AVR. I'm not sure if this is a factor. Can anyone tell me what seems to be the problem, if I can fix it myself, and which center here in Manila can fix it properly? Thanks.

it should work... maybe the unit is broken.

have you checked for any fuse in the unit itself?

[Courage]

thanks bro... is the capability to use 9.2 channels all using the internal powered amp of the RX-A2010? I don't understand fully the indication that I need to use an external amp to enable 9.2.

Yes for RX-A2010... Kabit ka lang nang 9 speakers and you're good to go...

Sa RX-A2000, it has Pre-Out for the additional 2 channels where you can connect a 2 channel amp...

The additional 2 channels nga pala is for Presence speakers/channel..

[socko888]

it should work... maybe the unit is broken.

have you checked for any fuse in the unit itself?

thanks for prompt response mr. jackryan. the unit itself is closed. so i didn't risk it. i brought it to audioworld yesterday since i concluded that i cannot do anything about it myself. ill be posting again on my experience with audioworld

[jackryan]

Yes for RX-A2010... Kabit ka lang nang 9 speakers and you're good to go...

Sa RX-A2000, it has Pre-Out for the additional 2 channels where you can connect a 2 channel amp...

The additional 2 channels nga pala is for Presence speakers/channel..

thanks bro...

btw, are those units sold on ebay reliable?

[Courage]

thanks bro...

btw, are those units sold on ebay reliable?

Base on my experience ok naman sila.. I buy only from Top Rated Sellers..

[≧◉◡◉≦xrampage≧◉◡◉≦]

Yes for RX-A2010... Kabit ka lang nang 9 speakers and you're good to go...

Sa RX-A2000, it has Pre-Out for the additional 2 channels where you can connect a 2 channel amp...

The additional 2 channels nga pala is for Presence speakers/channel..

Ano ba kuya A2000 ba or A2010? Nasa 40k na langbudget ko. 

[Courage]

Ano ba kuya A2000 ba or A2010? Nasa 40k na langbudget ko. 

Hindi naman malayo ang dalawa eh.. Unless gusto mo mag 9.2 without using an external amp then go with 2010, yung A2000 7.2 pero capable naman mag 9.2 kung gusto mo...

Thats the reason i choose A2000 instead of the 2010, very negligible ang difference.. mas mura pa... Features wise and power.. almost same..

[raider125jeigh]

Ano ba kuya A2000 ba or A2010? Nasa 40k na langbudget ko. 

a2010 na bilhin mo.....

[≧◉◡◉≦xrampage≧◉◡◉≦]

Hindi naman malayo ang dalawa eh.. Unless gusto mo mag 9.2 without using an external amp then go with 2010, yung A2000 7.2 pero capable naman mag 9.2 kung gusto mo...

Thats the reason i choose A2000 instead of the 2010, very negligible ang difference.. mas mura pa... Features wise and power.. almost same..

Sa ebay ba nung nag purchase ka di na niverify yung shipping address mo kasi iba ung shipping and billing adress mo di ba? Medyo mabigat na kasi ung 58k+ na budget for the receiver di ko naman kasi need yung 9.2  na feature niya. Baka ang kunin ko si yung A2000 

a2010 na bilhin mo.....

Puwede din nangungulam ka talaga pero di ko naman kasi need yung 9.2 na feature sayang din lang. 

[sientobente]

Question po, I'm eyeing the RX771, medyo takot pa kasi ako umorder abroad. What features will I lose if I go for this model vs higher end ones? I'm not really bothered with the watt/rms thing since an external amp is already planned plus 7.2 channels is already good for me. is the ypao version upgraded like higher end audysseys?

[≧◉◡◉≦xrampage≧◉◡◉≦]

Question po, I'm eyeing the RX771, medyo takot pa kasi ako umorder abroad. What features will I lose if I go for this model vs higher end ones? I'm not really bothered with the watt/rms thing since an external amp is already planned plus 7.2 channels is already good for me. is the ypao version upgraded like higher end audysseys?

Brader alam ko yun yung YPAO ung ang katapat ng audysseys ng onkyo with yamaha di ko lang alam kung may version venrsion din ang YPAO. Try to compare the model at yamaha site may compare models naman dun. Mas mabilis mo makikita ang pag kakaiba ng mga per model. 

[sientobente]

Brader alam ko yun yung YPAO ung ang katapat ng audysseys ng onkyo with yamaha di ko lang alam kung may version venrsion din ang YPAO. Try to compare the model at yamaha site may compare models naman dun. Mas mabilis mo makikita ang pag kakaiba ng mga per model. 

I've gone through it na brader, and the difference i see(771 vs a1010) is the wattage and the number of hdmi inputs(6 vs , did i miss anything else? dac is the same burr-brown. upscales to 1080p, 3D ready etc.

I saw that the ypao of the a2010 has reflected sound control while the lower models doesnt. ano pa kaya?

[≧◉◡◉≦xrampage≧◉◡◉≦]

I've gone through it na brader, and the difference i see(771 vs a1010) is the wattage and the number of hdmi inputs(6 vs , did i miss anything else? dac is the same burr-brown. upscales to 1080p, 3D ready etc.

I saw that the ypao of the a2010 has reflected sound control while the lower models doesnt. ano pa kaya?

Ah okay pero sa tingin ko ala ka na namiss and sa tingin ko get the a1010 para if ever matag la upgrade yan. 

[♡ lvcdg23™ ✌]

I've gone through it na brader, and the difference i see(771 vs a1010) is the wattage and the number of hdmi inputs(6 vs , did i miss anything else? dac is the same burr-brown. upscales to 1080p, 3D ready etc.

I saw that the ypao of the a2010 has reflected sound control while the lower models doesnt. ano pa kaya?

Brader suggestion ko lang is to get the highest position model you can get para wala nang what ifs saka hindi kana mag-iisip mag-upgrade

[≧◉◡◉≦xrampage≧◉◡◉≦]

Brader suggestion ko lang is to get the highest position model you can get para wala nang what ifs saka hindi kana mag-iisip mag-upgrade

Max your budget na. 

[raider125jeigh]

Max your budget na. 

max your budget elmer

[≧◉◡◉≦xrampage≧◉◡◉≦]

max your budget elmer

max na 45k brader baka kunin ko is RX-A2010 di ko naman kasi need ang 9.2. 

[raider125jeigh]

max na 45k brader baka kunin ko is RX-A2010 di ko naman kasi need ang 9.2. 

malay mo ...in the near future...

[≧◉◡◉≦xrampage≧◉◡◉≦]

malay mo ...in the near future...

Matagal pa un brader saka wala naman movie na naka original 9.2 audio. Saka maliit lang yung room ko para sa setup na 9.2. magkaron man siguro ako ng room na mas malaki meron na lalabas na mas maganda sa RX-A2010 or A3000 and mas affordable na.