Topic: Yamaha Receivers

[oReOsHaKe]

IMHO, I won't go this FAR for a receiver, You can get separates with almost same amount but has more flexibility for future upgrades...

I concur with you...  ... pero kung manalo ako sa lotto, why not... 

[kane]

IMHO, I won't go this FAR for a receiver, You can get separates with almost same amount but has more flexibility for future upgrades...

tama mga bro, seps is the way to go.  But if money is no object, di sige.  Then get tons of power amps.   

[Mo®pHeOu$]

yamaha has a new flagship receiver. RX-Z11.  Its 11.2, will be available by november. I think its around $5000. Lupit!!

WOW!!!!    $5000!!! 

That's too much for me!   

[rodel5]

mga sir ask lang.bkit nag sha shutdown yamaha avr ko,pero on ko lang ok na naman.nakalagay speaker line ata or wire.tnx

[kingkydoo]

mga sir ask lang.bkit nag sha shutdown yamaha avr ko,pero on ko lang ok na naman.nakalagay speaker line ata or wire.tnx

Sir, anong nangyari sa AVR niyo?

[kane]

sa mga naka yamaha receivers, ano po setting nyo for LFE,  is it just the sub, fronts, or both?  Ano din yung cross over settings.  thanks!

[ericag_ph]

I use LFE=sub only.  Sub is already too powerful, so no need for "both".  Both means LFE will go to fronts and the sub.
I set fronts (L+R+C) to "small" If I set LFE=sub.
Set fronts to "Large", if setting LFE=both or fronts
Receiver:  RXV-2095
Sub = Velodyne CHT12r

If you set to LFE=fronts only, then no LFE will go to your sub.  Do this only if you don't have a sub.

sa mga naka yamaha receivers, ano po setting nyo for LFE,  is it just the sub, fronts, or both?  Ano din yung cross over settings.  thanks!

[barrister]

sa mga naka yamaha receivers, ano po setting nyo for LFE,  is it just the sub, fronts, or both?  Ano din yung cross over settings.  thanks!

LFE -- subwoofer only
x-over -- 60 hz, all speakers set to "small".

[kane]

thanks guys!

[Kobe Bryant]

kmusta ang performance and price ng RV1800 vs sa mga new onkyo's 705 and 805?

thanks po

[scaglietti]

sir, sa yamaha receivers na may speaker a/b terminals,  possible ba na different configurations per speakers?  like yung speaker a is set to large, lfe=fronts, speaker b set to small and lfe=sub.  may nakapag try na ba?  thanks!

[trackers888]

kmusta ang performance and price ng RV1800 vs sa mga new onkyo's 705 and 805?

thanks po

Up ko lang ang tanung mga Sir, may naka RXV1800 na ba dito?

[lgas]

gud day to all, just want to ask opinion about my yamaha rxv457, set with wharfedale diamond 9.5, studio acoustic center, and audiophile surround, with custom sub....i love listening music most of the time, and i've encounter sometimes when im listening, the sound just slow down, then i try to touch my amp, and its hot..i was thinkin that maybe it just slowing down everytime when its getting hot..the 2nd thing is, im not using a voltage regulator, so mybe the voltage went down, coz our house is next to a water supplier which had three 3 submersible motor...so please, i need an advise....should i buy a voltage regulator? is these one of the yamaha's feature, slowing down when its hot to prevent damage?....

thnx very much..


genus t. salas from cebu



by the way, in one outlet with 3 plug sockets, is where i plug my sub, my dvd, and my amp

my sub is customise, two 150 watts in individual buffles with sub circuits, using an integrated amplifier yamaha 85 watts rms to drive my sub speakers.....its where my yamaha av recievers sub out is connected...advise please guys........

[Reymer]

gud day to all, just want to ask opinion about my yamaha rxv457, set with wharfedale diamond 9.5, studio acoustic center, and audiophile surround, with custom sub....i love listening music most of the time, and i've encounter sometimes when im listening, the sound just slow down, then i try to touch my amp, and its hot..i was thinkin that maybe it just slowing down everytime when its getting hot..the 2nd thing is, im not using a voltage regulator, so mybe the voltage went down, coz our house is next to a water supplier which had three 3 submersible motor...so please, i need an advise....should i buy a voltage regulator? is these one of the yamaha's feature, slowing down when its hot to prevent damage?....

thnx very much..


genus t. salas from cebu



by the way, in one outlet with 3 plug sockets, is where i plug my sub, my dvd, and my amp

my sub is customise, two 150 watts in individual buffles with sub circuits, using an integrated amplifier yamaha 85 watts rms to drive my sub speakers.....its where my yamaha av recievers sub out is connected...advise please guys........

The 457 is a lower model, maybe its having a hard time driving your Diamond 9.5 and other Speakers, specially at high volume. Pls check your speakers' impedance, shouldnt be lower than 6ohms. Also, provide proper ventilation to prevent heat build-up. Try to use exhaust fans and see if the problem recurs.

[2fast2furious]

Up ko lang ang tanung mga Sir, may naka RXV1800 na ba dito?

wala pa siguro. walang sumasagot. mahal ksi eh. hehehe...

[Reymer]

wala pa siguro. walang sumasagot. mahal ksi eh. hehehe...

Masyadong mahal dito sa atin, 69k  .

[MAtZTER]

The 457 is a lower model, maybe its having a hard time driving your Diamond 9.5 and other Speakers, specially at high volume. Pls check your speakers' impedance, shouldnt be lower than 6ohms. Also, provide proper ventilation to prevent heat build-up. Try to use exhaust fans and see if the problem recurs.

I agree. Also, impedance ratings arent always totally accurate. Speakers may ( & usually) dip down to 4 ohms or lower and that causes stress to the receiver cuz more current is needed. With the limited budget receiver engineers have, lower model receivers are naturally compromised on parts & are not built for low impedance loads, thats why they heat up like that.

For reference, THX select class receivers are torture tested at 4 ohms and the pricey THX ultra receivers are torture tested at 3.2 ohms before they pass their certification. For power amps, no problem at all since they have space for heat sinks & have beefier power supplies.

[defjam]

sir ano po ba ang ok na receiver for dvd and ps3?ung entry level lang po na 5.1 na.kasi planning to set up palang e.and san ba ok bumili na mura?

[Marl☆1]

Well, might as well post this on the Yamaha AVR thread - the Yamaha RZ-z11  11.2ch just bagged the top flagship receiver inthe Audioholics 2007 Product of the Year Awards.

Award: Flagship A/V Receiver
Yamaha RX-Z11 11.2CH A/V Receiver



Yamaha RX-Z11As if 7.1 channels weren’t enough, Yamaha stepped up to the plate with 11 all packed into one oversized chassis that will certainly have you breaking a sweat to install. The new RX-Z11 sports all of the latest processing features and connectivity including THX Ultra2 Plus, HDMI 1.3a, Dolby TrueHD and DTS-HD decoding, deep color and 1080p 24fps. Yamaha completely revamped their YPAO system to include an 8 point calibration system to ensure every seat is a good seat in the theater room. Weighing in at over 70lbs and with 11 channels of high current amplification, the RX-Z11 certainly has enough brawn and brains to serve as the center piece of even the most sophisticated home theater installations. As a bonus to all of you Macintosh lovers, you can even operate the entire receiver off of your iPhone.

To see the other A/V items who cut the grade and received awards, click HERE.

[MAtZTER]

baka 50% off na yung Z-9! 

[athos45]

Happy New Year, guys. I need help. I''m planning to set up a HT. Can I still use my RX-V795a Amp, or is this model outdated already? If I do upgrade my reciever what's the best "money for value" Yamaha Amps out there na mas bago? And how much could i sell my Yamaha Amp if i plan to upgrade? Thanks in advance.

[Reymer]

Happy New Year, guys. I need help. I''m planning to set up a HT. Can I still use my RX-V795a Amp, or is this model outdated already? If I do upgrade my reciever what's the best "money for value" Yamaha Amps out there na mas bago? And how much could i sell my Yamaha Amp if i plan to upgrade? Thanks in advance.

For a 5.1 setup, you can still use your 795a. Of course, if budget permits, it will be better if you upgrade to a newer avr (better processors/features). IMO, you can try the RX-V861 or the lesser 661. Ive seen 995's being sold for 9-10k at the marketplace, maybe your 795a will be lower .

[MAtZTER]

Nope, its not outdated yet. The new HD surround formats can be connected through your 5.1 analog inputs, even with no HDMI. Try power amping your setup as an upgrade. You will hear the  sonic differences of HD more with a well powered setup.

[athos45]

thanks guys, will probably invest in newer speakers nalang

[polgas]

For a 5.1 setup, you can still use your 795a. Of course, if budget permits, it will be better if you upgrade to a newer avr (better processors/features). IMO, you can try the RX-V861 or the lesser 661. Ive seen 995's being sold for 9-10k at the marketplace, maybe your 795a will be lower .

Sir, what's the going rate for the RX-V861?

[Ctlim]

polgas same nick at manila tonigh politics forum?

i believe its 48k? tama ba guys?

[polgas]

ctlim, hehe that's not me but I think I'm registered with a different name i just forgot what.. 

Medyo mataas pala price range niya...

[Ctlim]

yup thats usually the price range some even higher for amps that start with the high... 7. 8. 9... numbers...

[gunblade977]

question po sana... where can I get new-old stock yamaha avrs?

[macdon]

Bro - Yupangco daw may 70% off dun sa demo nilang AVR which you might consider. 24k nalang daw sya from 70k plus ata.