Author Topic: Yamaha Receivers (Read 400897 times)

dinz23 · « **Reply #2880 on:** Apr 22, 2008 at 08:03 AM »

Mga sir inquire lang ako kung sa tingin nyo magkano resale ng Yamaha RX-V800? thanks

reynold · « **Reply #2881 on:** Apr 22, 2008 at 04:41 PM »

Quote from: dinz23 on Apr 22, 2008 at 08:03 AM

Mga sir inquire lang ako kung sa tingin nyo magkano resale ng Yamaha RX-V800? thanks

I remember someone is selling his rxv-800 at 10 to 12K before the market place was shutdown last year.

Its a nice receiver bro

dinz23 · « **Reply #2882 on:** Apr 22, 2008 at 06:28 PM »

Quote from: reynold on Apr 22, 2008 at 04:41 PM

I remember someone is selling his rxv-800 at 10 to 12K before the market place was shutdown last year.

Its a nice receiver bro

Thanks for the info sir reynold..

.

praktikal · « **Reply #2883 on:** Apr 22, 2008 at 06:42 PM »

Quote from: dinz23 on Apr 22, 2008 at 06:28 PM

Thanks for the info sir reynold.. .

selling it? how much? tnx

praktikal · « **Reply #2884 on:** Apr 22, 2008 at 07:28 PM »

PM sent
tnx

praktikal · « **Reply #2885 on:** Apr 22, 2008 at 08:00 PM »

just in case here's my cel#

09203031232

tnx

dinz23 · « **Reply #2886 on:** Apr 22, 2008 at 08:17 PM »

Quote from: praktikal on Apr 22, 2008 at 08:00 PM

just in case here's my cel#

09203031232

tnx

pm sent na po.. tnx

reynold · « **Reply #2887 on:** Apr 23, 2008 at 11:42 AM »

Haha, sabi ko sa'yo ok na receiver yan e, kita mo dami agad nagka-interest, hehe

Congrats sa makakabili ha

teka, how much ba, pa-pm din ako

dinz23 · « **Reply #2888 on:** Apr 23, 2008 at 06:43 PM »

Quote from: reynold on Apr 23, 2008 at 11:42 AM

Haha, sabi ko sa'yo ok na receiver yan e, kita mo dami agad nagka-interest, hehe

Congrats sa makakabili ha

teka, how much ba, pa-pm din ako

pm sent

comet · « **Reply #2889 on:** Apr 28, 2008 at 02:07 PM »

Mga sirs,

Has anyone tried using Presence speaker channels for the dialogue lift?

pchin · « **Reply #2890 on:** Apr 28, 2008 at 03:33 PM »

Quote from: comet on Apr 28, 2008 at 02:07 PM

Mga sirs, Has anyone tried using Presence speaker channels for the dialogue lift?

I'm curious too.

In my setup I choose surround back over the presence.

comet · « **Reply #2891 on:** Apr 28, 2008 at 08:26 PM »

Ganun din ako sir, I chose the surround back over the presence channels. Wala ksi akong shelves beside the screen to try them. To those who have tried this, pashare na lang po ng experience.

...

dinz23 · « **Reply #2892 on:** Apr 28, 2008 at 10:53 PM »

Hello everyone... I need help

regarding my Yamaha AVR RX-V1200 (anyone still using this model??)

Recently po kasi, I noticed that the monitor blinked... It's like this, when i put the volume up to -20 or louder, it starts to blink... I just saw the blinking when I stared at the LCD of the AVR pero the blink was only once or twice... Is this thing normal?

I used to own kasi RXV800 and I never encounter that kind of problem... What seems to be the problem? Anyone... Help pls...

Thanks!

BTW, I paired my RX-V1200 with a B&W 601 s2 as front, CC600 s2 for center, Wharfs 8 Dipole and US Audio as my subs. Bka kasi it has something to do with the speakers also.

pchin · « **Reply #2893 on:** Apr 29, 2008 at 07:15 AM »

Owners of RX-V1700 & HTR-6090:

There's an available FIRMWARE UPDATE.

reynold · « **Reply #2894 on:** Apr 29, 2008 at 11:53 AM »

Quote from: dinz23 on Apr 28, 2008 at 10:53 PM

Hello everyone... I need help regarding my Yamaha AVR RX-V1200 (anyone still using this model??)

Recently po kasi, I noticed that the monitor blinked... It's like this, when i put the volume up to -20 or louder, it starts to blink... I just saw the blinking when I stared at the LCD of the AVR pero the blink was only once or twice... Is this thing normal? I used to own kasi RXV800 and I never encounter that kind of problem... What seems to be the problem? Anyone... Help pls... Thanks!

BTW, I paired my RX-V1200 with a B&W 601 s2 as front, CC600 s2 for center, Wharfs 8 Dipole and US Audio as my subs. Bka kasi it has something to do with the speakers also.

Baka may kailangan lang i-solder uli sa back Panel ng lcd ng avr mo bro, have it check by a reliable technician...

dinz23 · « **Reply #2895 on:** Apr 29, 2008 at 10:42 PM »

thanks sir rey.. will do that

darkwing · « **Reply #2896 on:** Apr 30, 2008 at 12:43 AM »

guys what do you think of the FX-V663?

http://www.yamaha.com/yec/products/productdetail.html?CNTID=567571

parang ok rin ah, deciding this and the Onkyo 605

flak-jacket · « **Reply #2897 on:** Apr 30, 2008 at 12:55 AM »

Quote from: darkwing on Apr 30, 2008 at 12:43 AM

guys what do you think of the FX-V663?

http://www.yamaha.com/yec/products/productdetail.html?CNTID=567571

parang ok rin ah, deciding this and the Onkyo 605

inquired about this particular yamaha model.. hindi pa daw availabe sa LIS shang.

leomar · « **Reply #2898 on:** Apr 30, 2008 at 12:15 PM »

yamaha rxv-863 is S$1299 in Singapore

rxv-1800 is 1799...

which one is better as pre-pro?

threadlock · « **Reply #2899 on:** May 02, 2008 at 12:44 PM »

Quote from: leomar on Apr 30, 2008 at 12:15 PM

yamaha rxv-863 is S$1299 in Singapore
rxv-1800 is 1799...

which one is better as pre-pro?

I'd vote for rx-v1800. Featurewise there is very little difference between the two but the 11lbs. weight difference will leave you asking why is that so. hint: better internals, amp and pre-amp section

reynold · « **Reply #2900 on:** May 02, 2008 at 02:12 PM »

Quote from: threadlock on May 02, 2008 at 12:44 PM

I'd vote for rx-v1800. Featurewise there is very little difference between the two but the 11lbs. weight difference will leave you asking why is that so. hint: better internals, amp and pre-amp section

Agree

Go for the mid-level receivers, Power first before features

pchin · « **Reply #2901 on:** May 02, 2008 at 05:07 PM »

Since leomar intends to use the receiver as pre-pro then the "power" issue lies on the power amplifier not on the receiver...even the RX-V863 has great features & should suffice.

leomar · « **Reply #2902 on:** May 02, 2008 at 06:26 PM »

@pchin

yep, power will be on the poweramp... ok, so i think i have an idea what to buy =)

MAtZTER · « **Reply #2903 on:** May 03, 2008 at 12:34 PM »

If its w/in your budget, go for the higher model. With better parts & decoders, it will surely have better performance as pre/pro.

Look at the chips they use, if the same, go for the lower model. If different, get the higher model (if w/in your budget).

pilyo168 · « **Reply #2904 on:** May 20, 2008 at 02:43 AM »

guys try ninyo itong low impedance subwoofer amplifier para sa rca sub output ng Yamaha receiver ninyo.

copy paste link.

http://tipidpc.com/viewitem.php?iid=734004

spiro0426 · « **Reply #2905 on:** May 26, 2008 at 09:30 AM »

I bought this Yamaha 5.1 HT (im not so sure with model, but as i recall NSP/ NST) just last year from a fellow member. Recently, something happened with the AVR when i planned to transfer it to another location. I left it to a place kung saan accidentally natapunan ng "slurpee" ng pinsan ko. The slurpee solidify after a day.

Havent tried setting it up for something wrong might happen. Im attaching a pic here to ask you guys kung magkakaroon ba ng bad effect ang portion kung saan tumulo ung liquid? Will there be any electrical defect on the unit kapag inoperate ko ulit?

Thanks in advance.

Reymer · « **Reply #2906 on:** May 26, 2008 at 03:31 PM »

You can clean that portion with a small brush and denatured alcohol, or you can use contact cleaner. Kailangan matunaw ung naiwang slurpee at matanggal mo lahat. Put something, maybe cloth or tissue paper under the PCB para hindi tumulo sa iba pang parts. Just make sure that everything is thoroughly dry before you use the unit. Hope this helps.

spiro0426 · « **Reply #2907 on:** May 26, 2008 at 04:30 PM »

thanks reymer, that part can also be removed. safe kaya na tanggalin ko na lang then clean it outside.

Reymer · « **Reply #2908 on:** May 26, 2008 at 05:05 PM »

Quote from: spiro0426 on May 26, 2008 at 04:30 PM

thanks reymer, that part can also be removed. safe kaya na tanggalin ko na lang then clean it outside.

Much better if you can do that

ricochet315 · « **Reply #2909 on:** Jun 26, 2008 at 08:45 AM »

Quote from: trackers888 on Dec 06, 2007 at 04:35 PM

Up ko lang ang tanung mga Sir, may naka RXV1800 na ba dito?

I have a Yamy RX-V1800 driving a 7.1 Boston Accoustics Horizon Series and a 12 inch Klipsch sub. I would say that this Yamy amp is worth every penny I invested on it. Its sound is crisp and clear on both Dolby Digital and DTS. On Pure Audio setting, the sound is accoustically balanced from highs to the lows with the BA 450 towers. It also upgrades superbly, up to 1080p, video inputs through component from my old DVD player to my Pioneer 428XG plasma. Mostly for audio, I use my Cambridge Audio DVD99 player through HDMI 1.3 cable. The output is breathtaking. I haven't tried Dolby TrueHD and DTSHD as I still don't have a BlueRay disc player

Note though that I all bought all of these abroad.