Author Topic: * Junkie's Music System * DONE? Not Yet Maybe... ! ! ! (Read 434094 times)

audiojunkie · « **Reply #2550 on:** Mar 13, 2011 at 04:30 AM »

Mr.H · « **Reply #2551 on:** Mar 13, 2011 at 08:09 AM »

very nice brader mon!

laging may bagong hakot

audiojunkie · « **Reply #2552 on:** Mar 13, 2011 at 10:01 AM »

Quote from: Mr.H on Mar 13, 2011 at 08:09 AM

very nice brader mon!
laging may bagong hakot

thanks brader Hermie!..

'parang adik na rin brader, 'di makapigil pagnakakita ng maganda... (gear) ..

Hammerheart · « **Reply #2553 on:** Mar 13, 2011 at 08:05 PM »

gayon manoy...

audiojunkie · « **Reply #2554 on:** Mar 13, 2011 at 09:30 PM »

Quote from: tormentor on Mar 13, 2011 at 08:05 PM

gayon manoy...

mabalos manoy!...

magayonun man maski na maitom....

audiojunkie · « **Reply #2555 on:** Mar 26, 2011 at 09:37 PM »

Took a time-off from my daily routine to diagnose my non-working Luxman PX-101 TTable I got from used market long time back. Condition was powering on and all function pilot lamps are working but the motor and tonearm are completely dead.

Found the problems, busted fuse and loose rubber pully. Have them replaced but another unexpected problem came out... " motor speed is not normal, Very fast on both settings. " With my limited knowledge on electronics I decided to stopped than touch someting that might worsen the problem.

Posted here for any opinions about the problem and if possible I can DIY the fix...

Thanks..

audiojunkie · « **Reply #2556 on:** Apr 02, 2011 at 08:24 PM »

Replacing generic HDMI cable with this...

sientobente · « **Reply #2557 on:** Apr 03, 2011 at 04:11 AM »

With this kind of system, parang wala ka ng hahanapin pa.

audiojunkie · « **Reply #2558 on:** Apr 03, 2011 at 09:45 AM »

Quote from: sientobente on Apr 03, 2011 at 04:11 AM

With this kind of system, parang wala ka ng hahanapin pa.

Thanks brader...

sa hobby parang walang katapusan pagbabago kahit luma...

piggyback · « **Reply #2559 on:** Apr 04, 2011 at 05:06 PM »

hello audiojunkie,

I noticed your Pro-ject debut III and it's very nice indeed. I would like to ask where did you get it from coz I'm looking for one. Thank you.

audiojunkie · « **Reply #2560 on:** Apr 04, 2011 at 09:45 PM »

Quote from: piggyback on Apr 04, 2011 at 05:06 PM

hello audiojunkie,

I noticed your Pro-ject debut III and it's very nice indeed. I would like to ask where did you get it from coz I'm looking for one. Thank you.

Hi piggyback, it's debut II not III which has better arm type. Got it from used market with scratched and cracked dust cover. good thing is the motor and arm/cart are still good working condition..

Thanks for the interest...

audiojunkie · « **Reply #2561 on:** Apr 09, 2011 at 01:01 AM »

A Fine Craftsmanship of our Modelmaker in his free time:

timber715 · « **Reply #2562 on:** Apr 09, 2011 at 01:12 AM »

Quote from: audiojunkie on Apr 09, 2011 at 01:01 AM

A Fine Craftsmanship of our Modelmaker in his free time:

cable lifters brader? modelmaker? what business are you in?

pasencia na for the questions

audiojunkie · « **Reply #2563 on:** Apr 09, 2011 at 01:22 AM »

Quote from: timber715 on Apr 09, 2011 at 01:12 AM

cable lifters brader? modelmaker? what business are you in? pasencia na for the questions

yes brader Timber...

I work for Architectural/Engineering Company here in Middleast. We have inhouse modelmaker who happens to be kababayan kaya madaling kausap ...

timber715 · « **Reply #2564 on:** Apr 09, 2011 at 01:30 AM »

Quote from: audiojunkie on Apr 09, 2011 at 01:22 AM

yes brader Timber...

I work for Architectural/Engineering Company here in Middleast. We have inhouse modelmaker who happens to be kababayan kaya madaling kausap ...

Nice, I'm sure you have access to nice designs for anything that can be made of wood

... hope things are fine where you are, cnn often reports chaos in the middle east.
keep safe.
cheers

audiojunkie · « **Reply #2565 on:** Apr 09, 2011 at 02:00 AM »

Quote from: timber715 on Apr 09, 2011 at 01:30 AM

Nice, I'm sure you have access to nice designs for anything that can be made of wood ... hope things are fine where you are, cnn often reports chaos in the middle east.
keep safe.
cheers

wood is quite expensive in my location. common materials aside from concrete are stones and gypsum - GRG (glass reinforced gypsum) for interior.

no worry brader everything is fine here....

audiojunkie · « **Reply #2566 on:** Apr 10, 2011 at 12:33 AM »

old:

new:

audiojunkie · « **Reply #2567 on:** Apr 26, 2011 at 06:28 AM »

Another Spinner:

Technics SL-D33

Strobe Light:

Grooving:

Arm:

The Body:

Versatile Piece of Gear:

Technics Tuner / Preamp
http://audio-database.com/TechnicsPanasonic/amp/st-k808-e.html
Top Less:

Inputs:

Hidden Features:

The Look:

Thanks!

audio backyard · « **Reply #2568 on:** Apr 28, 2011 at 03:45 AM »

grabe talaga set up mo kuya ramon.

audiojunkie · « **Reply #2569 on:** Apr 28, 2011 at 08:46 AM »

Quote from: edwinbas on Apr 28, 2011 at 03:45 AM

grabe talaga set up mo kuya ramon.

Hi sir Edwin! sa wakas nagpost ka na! pektyuran mo na kasi yang setup mo. kunan mo ng close-up shot yang Z9 at KI signature..

pagpunta mo dito ayusin natin yung mga pektyurs para maepost na dito sa gallery. yung 3 mong subs kunan mo rin...

Onkyo606 · « **Reply #2570 on:** Apr 28, 2011 at 10:23 AM »

ikaw ang maraming hakot brader mon

congrats

Brian_mico · « **Reply #2571 on:** Apr 28, 2011 at 10:27 AM »

eto pa isa... nakakalaway din mga hakot mo ah...
etong mahirap pag nakakakita ako ng mga lumang gamit katulad nito..
na dede prioritized tuloy yung HT set-up ko. .

audiojunkie · « **Reply #2572 on:** Apr 29, 2011 at 01:36 AM »

Quote from: Onkyo606 on Apr 28, 2011 at 10:23 AM

ikaw ang maraming hakot brader mon

congrats

Thenks, thenks!
Brader Tirso! mga pinaglumaan na yan na pwede pang mapakinabangan...

audiojunkie · « **Reply #2573 on:** Apr 29, 2011 at 01:45 AM »

Quote from: Brian_mico on Apr 28, 2011 at 10:27 AM

eto pa isa... nakakalaway din mga hakot mo ah...
etong mahirap pag nakakakita ako ng mga lumang gamit katulad nito..
na dede prioritized tuloy yung HT set-up ko. .

Thanks Bro Brian!... tyempo lang yan sa suking tindahan ng mga lumang gamit...

iba rin kasi ang tunog kumpara sa mga bagong gawa na digital chips na ang mga laman. Ang B&K preamp ko meron built-in tuner pero mas gusto ang tunog nitong ST-K808...

audiojunkie · « **Reply #2574 on:** Apr 29, 2011 at 08:52 AM »

Sold my Cambridge Audio D300 CD Player to Edwinbas a fellow Audio/Video enthusiast.

sana mag-enjoy ka rin sa pakikinig sa D300.

audio backyard · « **Reply #2575 on:** Apr 29, 2011 at 06:02 PM »

audio junkie thanks sa cambrigde d300 cd player.super ganda tumunog pang audiophile.may kasama na yung marantz cd-63mk11ki signature ko.thanks audio junkie the best ka talaga.

audiojunkie · « **Reply #2576 on:** May 06, 2011 at 04:53 AM »

Quote from: edwinbas on Apr 29, 2011 at 06:02 PM

audio junkie thanks sa cambrigde d300 cd player.super ganda tumunog pang audiophile.may kasama na yung marantz cd-63mk11ki signature ko.thanks audio junkie the best ka talaga.

mabuti naman pumasa sa maselan mong pandinig ....

na-mimiss ko na nga ang tunog nyan...

..si Eron naghahanap pa rin ng player...

heto naman ang replacement....

audiojunkie · « **Reply #2577 on:** May 07, 2011 at 03:54 AM »

Got a chance to grab a matching center for version 3 before it gone out of stock...

Mr.H · « **Reply #2578 on:** May 07, 2011 at 05:52 AM »

nice catch brader mon

complete na 3 tenors mo

audiojunkie · « **Reply #2579 on:** May 07, 2011 at 10:23 AM »

Quote from: Mr.H on May 07, 2011 at 05:52 AM

nice catch brader mon
complete na 3 tenors mo

Thanks brader Hemie...

actually, I supposed to get the CC470 but already out of stock. Only 2 pieces left in the stock and it's the last batch for this version. Version 4 & 5 are totally different in configurations.