Topic: Weng's World 7.2

[Weng!]

BUMP! brader weng!  saan na yung bagong BOOM BOOM POW! 

brader john, thanks for the bump. will update my pics later

[Weng!]

sir, ang ganda ng set up nyo congrats.

thanks sir onjing

[praktikal]

amigo, husay ng sub, post mo na dito 

nasubukan mo na bang pahigain? ang sa akin noong una ganyan din pero napansin ko mas maganda pagpahiga. 

[Weng!]

new gears in the house

infinity kappa perfect 12dvq and JL12w3v2 subs in a 'simple kappa box' tuned to 20hz





powered by pilyo's amp3 with 20A transformer


modded case with fan








diy'd center speaker stand using 3/4" MDF and covered with vinyl laminate. now, the height of the center is same with the fronts


2'x4'x4" acoustic panel using 2 sheets of 2" rockwool at the back corners



av rack....very messy wiring

[zerukul]

nice setup sir! congrats sa new gears!

[Weng!]

amigo, husay ng sub, post mo na dito 

nasubukan mo na bang pahigain? ang sa akin noong una ganyan din pero napansin ko mas maganda pagpahiga. 

thanks sir praktikal. di ko na sinubukan ihiga sa sobrang bigat. tsaka na siguro pag may time.

[Weng!]

nice setup sir! congrats sa new gears!

thanks sir, ganda rin setup mo.

[timber715]

sir, you have a very nice place and gears and well placed and anticipated. may I suggest you have someone make a false back on the av rack so you can hide the wires... nothing fancy, just a piece of veneered plywood cut to the size of the space behind it. just make sure that it can be installed and removed with the equipments in place in case you need to add or remove some...

[John E.]

very nice sir weng  

congrats on your successful dual sub set-up!

[praktikal]

sir, you have a very nice place and gears and well placed and anticipated. may I suggest you have someone make a false back on the av rack so you can hide the wires... nothing fancy, just a piece of veneered plywood cut to the size of the space behind it. just make sure that it can be installed and removed with the equipments in place in case you need to add or remove some...

good idea kaso lang ang iba ayaw nilang lagyan kasi di makakakasingaw ng husto ang init ng gears. another option which di ko pa nakikita sa mga av racks e yung wire mesh instead od solid board. yung tipong ginagamit sa screen door. meron nyan dark brown kaya bagay sa wood. ang sa akin nya open din pero pinagapang ko sa edges ng mga plywood. 

[Weng!]

@timber715,

thanks sir. matagal ko ng gustong lagyan ng false wall kaya lang dami ng wire na nakakalat at daming bubutasan sa board. dapat palitan ko ng longer speaker wires so i can moved them all in one whole bunch on one side then madali nalang pagawa ng butas sa false wall.

thanks sir johne

[zerukul]

thanks sir, ganda rin setup mo.

salamat din sir. gusto ko ung placement ng gears nyo, well distributed sa area.

[Weng!]

Velodyne Subwoofer Management System (SMS-1)


SMS-1 mic at sweet spot


freq response graph


subs with grille


sub video at 10hz tone
http://www.youtube.com/watch?v=oIO-n3hY8zA

[streetsmart]

Weng, when you use the SMS-1 mic, make sure that it is pointed as high up as possible. It is designed for "grazing incidence."

[Weng!]

Weng, when you use the SMS-1 mic, make sure that it is pointed as high up as possible. It is designed for "grazing incidence."

ah ganun ba? does it mean i have to point the tip of the mic to the ceiling? will the tip of the mic be at the same level of my ear while seated at the sweet spot?

thanks sa tip.

[Onkyo606]

Velodyne Subwoofer Management System (SMS-1)


SMS-1 mic at sweet spot


freq response graph


subs with grille


sub video at 10hz tone
http://www.youtube.com/watch?v=oIO-n3hY8zA

ang ganda naman congrats

[streetsmart]

ah ganun ba? does it mean i have to point the tip of the mic to the ceiling? will the tip of the mic be at the same level as my ear while seated at the sweet spot?

thanks sa tip.

Ideally, the mic should point directly at the ceiling and at the same level as your ears. A slight deviation should not matter much.

Also, if you use pillows as your stand, they may vibrate and affect the readings. Ideally, you should use a mic stand with boom.

[Weng!]

... a little change for now

folding door




next update are:
- 2hp carrier inverter a/c
- move the tv to the left (bigger) wall
- install acoustic panels

[audiojunkie]

wow! ganda!     

2 tones, and darker on HT side..  tama po ba? ...

[Weng!]

wow! ganda!     

2 tones, and darker on HT side..  tama po ba? ...

thanks sir junkie. no, the door finish is the same. kuha lang yan ng murang camera

[praktikal]

neat house amigo! 

[Weng!]

neat house amigo! 

thanks

[audiojunkie]

thanks sir junkie. no, the door finish is the same. kuha lang yan ng murang camera

ganyan din madalas ang mga kuha ko sa digicam... mas marami napupunta sa BIN kesa mapapakinabangan...     

[macdon]

ang galing brader Weng - congrats! 

Enjoying your sms1? 

[Weng!]

ang galing brader Weng - congrats! 

Enjoying your sms1? 

thanks brader mac. tagal ko ng di kinalikot ang sms wait ko muna matapos ang paglipat sa tv sa kaliwang wall at mag calibrate uli.

[ǝʞɐɾ ʎzzɐɾ]

brader weng,

kaabang abang itong update mo!  dapat may before and after pics!

excited na kami!

cheers!

[Weng!]

my bro is planning to set up a simple HT. i offered him my wharfe evo10 BS for a start. since he is scouting for a wharfe evo center, i am contemplating on releasing my evo center and replace it with a new center w/ 6.5" woofers to match the evo30 FS.

i inquired sir anthony and he recommended his tablette center w/ 2x 6.5" woofer and vifa tweets.

can i easily timbre match the tablete center with the use of audyssey? i am also thinking of replacing the "plastic" DFS to a tablete dipole (if there is any).

what do you guys think, am i going the right direction?

[macdon]

my bro is planning to set up a simple HT. i offered him my wharfe evo10 BS for a start. since he is scouting for a wharfe evo center, i am contemplating on releasing my evo center and replace it with a new center w/ 6.5" woofers to match the evo30 FS.

i inquired sir anthony and he recommended his tablette center w/ 2x 6.5" woofer and vifa tweets.

can i easily timbre match the tablete center with the use of audyssey? i am also thinking of replacing the "plastic" DFS to a tablete dipole (if there is any).

what do you guys think, am i going the right direction?

Brader Weng - you also might like to post this question in the A-Audio thread or maybe the wharfe speaker thread - those with Wharfe and a-audio tablettes might offer their feedback.

During Anthony's last sale, I scored a tablette set for my gaming rig - the center speaker was the 6.5". Sayang nga i didnt get to test it kasi ang laki ng enclosure so I had it changed to the 5.5" version. But my L&R speakers remained 6.5".

[Weng!]

Brader Weng - you also might like to post this question in the A-Audio thread or maybe the wharfe speaker thread - those with Wharfe and a-audio tablettes might offer their feedback.

During Anthony's last sale, I scored a tablette set for my gaming rig - the center speaker was the 6.5". Sayang nga i didnt get to test it kasi ang laki ng enclosure so I had it changed to the 5.5" version. But my L&R speakers remained 6.5".

thanks brader mac, i will post this on a-audio thread.

is the vifa a soft dome tweet? the wharf sports a soft dome tweets so it should have the same soft dome too on the a-audio center.

[macdon]

thanks brader mac, i will post this on a-audio thread.

is the vifa a soft dome tweet? the wharf sports a soft dome tweets so it should have the same soft dome too on the a-audio center.

Yes sir, soft dome