Author Topic: ♫ ♪ ♫ Isla Pantasya™ Headphone Vintage Gears Set-up... ♫ ♪ ♫ (Read 675550 times)

ǝʞɐɾ ʎzzɐɾ · « **Reply #750 on:** Jul 12, 2008 at 02:42 PM »

sa AVR ok ang reading, malamang dun na lang! tsk sayang yung mga saksakan sa bada!

XXXyzledge · « **Reply #751 on:** Jul 12, 2008 at 02:44 PM »

Quote from: Jazzy Jake on Jul 12, 2008 at 02:42 PM

sa AVR ok ang reading, malamang dun na lang! tsk sayang yung mga saksakan sa bada!

wat u mean?
kung sa HT setup mo...

pwede naman sa BADA nakasaksak lahat....
tapos yung BADA na lang nakasaksak sa AVR.....

ǝʞɐɾ ʎzzɐɾ · « **Reply #752 on:** Jul 12, 2008 at 03:02 PM »

Quote from: XXXyzledge on Jul 12, 2008 at 02:44 PM

wat u mean?
kung sa HT setup mo...

pwede naman sa BADA nakasaksak lahat....
tapos yung BADA na lang nakasaksak sa AVR.....

yup agree kaya lang yung avr walang detachable power cord...mapapalitan kaya yung likod nun para makapag palit ng mas poging power cord? ahihihihi!

sa AVR ng audio ok ang reading.

pwede din kaya gawan ng magandang housing yung AVR? yung tipong brushed aluminum din! bwahahahahaha!

XXXyzledge · « **Reply #753 on:** Jul 12, 2008 at 03:11 PM »

bili na lang nga ako 1 pang AVR......

uy! saw somewhere here sa PDVD...
meron nag-kalikot ng AVR... ginawang 3 prongs (may ground)
yung wire nya going out of AVR to wall plug!

dito :
http://pinoydvd.com/board/index.php?topic=1823.690
reply number 702

audiojunkie · « **Reply #754 on:** Jul 12, 2008 at 04:11 PM »

Quote from: Jazzy Jake on Jul 12, 2008 at 03:02 PM

yup agree kaya lang yung avr walang detachable power cord...mapapalitan kaya yung likod nun para makapag palit ng mas poging power cord? ahihihihi!
sa AVR ng audio ok ang reading.
pwede din kaya gawan ng magandang housing yung AVR? yung tipong brushed aluminum din! bwahahahahaha!

brader jake, meron ako dalawang options kun gusto mong pagandahin ang likod ng AVR or kahit anong gears using after-market (or DIY glow in the dark) power cords.

OPTION-A = kilangan e-modify ang likod ng unit, cut-out to fit the receptacle & screwed on. Effect: maganda parang original.

OPTION-B = No modification required to the unit, just cut about 3" lenght of the original cord and connect the adaptor. Effect: No damage to the back panel of the unit but you got a dangling pigtail .

In my observations, most AVR's have very thin power cord or some called it lamp cord.

and my Choice?..Option-.....A...

ǝʞɐɾ ʎzzɐɾ · « **Reply #755 on:** Jul 12, 2008 at 05:04 PM »

Quote from: XXXyzledge on Jul 12, 2008 at 03:11 PM

bili na lang nga ako 1 pang AVR......

uy! saw somewhere here sa PDVD...
meron nag-kalikot ng AVR... ginawang 3 prongs (may ground)
yung wire nya going out of AVR to wall plug!

dito :
http://pinoydvd.com/board/index.php?topic=1823.690
reply number 702

hehe yung pinalitan ata yung for the terminals of the units to be plugged hindi yung power plug terminal.

ǝʞɐɾ ʎzzɐɾ · « **Reply #756 on:** Jul 12, 2008 at 05:06 PM »

Quote from: audiojunkie

brader jake, meron ako dalawang options kun gusto mong pagandahin ang likod ng AVR or kahit anong gears using after-market (or DIY glow in the dark) power cords.

OPTION-A = kilangan e-modify ang likod ng unit, cut-out to fit the receptacle & screwed on. Effect: maganda parang original.

tama ka dito sa option na to brader! hmmmmm......

serious ka ba dun sa rekados? kailan ka simula ng pagawa? PM kita bro for the group buy ng power cord.

audiojunkie · « **Reply #757 on:** Jul 12, 2008 at 05:30 PM »

Quote from: Jazzy Jake on Jul 12, 2008 at 05:06 PM

tama ka dito sa option na to brader! hmmmmm......

serious ka ba dun sa rekados? kailan ka simula ng pagawa? PM kita bro for the group buy ng power cord.

brader jake, nagcanvass na ako ng mga rekados.hindi kasi abelabol sa suking tindahan dito. mga next week palalakarin ko na 'tong alaga kong daga sa divisoria para mamili,kilangan kasi isang bayong lang ang lagayan para tipid sa pasahe (nakakuha na kasi ng tarepa sa LTO kaya nataas na rin sila).meron na ring VAT sa aking buson sa ibayo...

ǝʞɐɾ ʎzzɐɾ · « **Reply #758 on:** Jul 13, 2008 at 07:18 AM »

Quote from: audiojunkie on Jul 12, 2008 at 05:30 PM

brader jake, nagcanvass na ako ng mga rekados.hindi kasi abelabol sa suking tindahan dito. mga next week palalakarin ko na 'tong alaga kong daga sa divisoria para mamili,kilangan kasi isang bayong lang ang lagayan para tipid sa pasahe (nakakuha na kasi ng tarepa sa LTO kaya nataas na rin sila).meron na ring VAT sa aking buson sa ibayo...

nyahahaha! got your PM bro. accept mo naman YM ko para maka chat tayo about it. just want to get firmer details for the group buy.

JAQY888 · « **Reply #759 on:** Jul 13, 2008 at 08:22 AM »

tsk tsk tsk ... mukhang may niluluto kayo ni brader Mon a .... hmmmm, ano na naman kaya yun? mukhang masarap mga rekados a ... hehehehe

ǝʞɐɾ ʎzzɐɾ · « **Reply #760 on:** Jul 13, 2008 at 10:06 AM »

Quote from: JAQY888 on Jul 13, 2008 at 08:22 AM

tsk tsk tsk ... mukhang may niluluto kayo ni brader Mon a .... hmmmm, ano na naman kaya yun? mukhang masarap mga rekados a ... hehehehe

sama ka sa group buy? saksakan ng mura malayo dun sa mga popular power kebols na abelabol ngayon!

hmmm...baka naman may bitbit ka na din galing kantapore!

macdon · « **Reply #761 on:** Jul 13, 2008 at 10:22 AM »

Quote from: Jazzy Jake on Jul 13, 2008 at 10:06 AM

sama ka sa group buy? saksakan ng mura malayo dun sa mga popular power kebols na abelabol ngayon!

hmmm...baka naman may bitbit ka na din galing kantapore!

I'm in papi Jake - balitaan mo lang ako

ǝʞɐɾ ʎzzɐɾ · « **Reply #762 on:** Jul 13, 2008 at 10:28 AM »

Quote from: macdon on Jul 13, 2008 at 10:22 AM

I'm in papi Jake - balitaan mo lang ako

oks mac, just finalizing details with audiojunkie. although meron din local braiders pala, i just found out.

macdon · « **Reply #763 on:** Jul 13, 2008 at 11:23 AM »

Quote from: Jazzy Jake on Jul 13, 2008 at 10:28 AM

oks mac, just finalizing details with audiojunkie. although meron din local braiders pala, i just found out.

Cge bro - paubaya ko nalang sa iyo the best route to take. Just let me know the details

Superman · « **Reply #764 on:** Jul 13, 2008 at 12:19 PM »

balitaan niyo ko sa power cord ha!

JAQY888 · « **Reply #765 on:** Jul 13, 2008 at 12:20 PM »

aba aba aba .. group buy a ... heheheh. ayus yan ... pre, ala akong bitbit nyan ...
iba yang gawa ni Bro Mon e

... mas maganda yan ...

Superman · « **Reply #766 on:** Jul 13, 2008 at 12:28 PM »

WELCOME BACK!

audiojunkie · « **Reply #767 on:** Jul 13, 2008 at 12:57 PM »

Quote from: Jazzy Jake on Jul 13, 2008 at 07:18 AM

nyahahaha! got your PM bro. accept mo naman YM ko para maka chat tayo about it. just want to get firmer details for the group buy.

got your email bro, mali nga ata computation ko talagang mahina ako aritmetiks....

mga bros, salamat sa interes nyo... nasa planning stage pa lang ito saka na lang ere-reveal kapagtapos na ang imbestigasyon ng CSI...

blackd70s · « **Reply #768 on:** Jul 13, 2008 at 04:10 PM »

don onin! bro jake!

ano na naman yang group buy na pinaplano moh! hahahahahaha! idol ka talaga!

ǝʞɐɾ ʎzzɐɾ · « **Reply #769 on:** Jul 13, 2008 at 09:31 PM »

Quote from: audiojunkie

got your email bro, mali nga ata computation ko talagang mahina ako aritmetiks....

mga bros, salamat sa interes nyo... nasa planning stage pa lang ito saka na lang ere-reveal kapagtapos na ang imbestigasyon ng CSI...

hehe sabi ko na brader eh kasi siguro nasa loob ka ng patay sindi kaya di mo masyado nakita yung pipindutin sa kalkaletor! ahihihi! let me know if ready ka na at bago ka bumili ayusin ko na group buy.

basta bro dapat mahabol natin presyo nung malapit lapit sa DIY power cord na pinoy made similar to the thread here in the forum. other option is to include and use materials not available here so still an attractive proposition, otherwise baka mas ok pagawa dito.

thanks brader mon!

byron · « **Reply #770 on:** Jul 13, 2008 at 09:32 PM »

Teka teka,
pasali naman dyan. please advise who the local braider is for the group buy. please pm me details.
thanks!!!

ǝʞɐɾ ʎzzɐɾ · « **Reply #771 on:** Jul 13, 2008 at 09:39 PM »

braders mac, jen, jess, raul at byron,

will update you as soon as i receive finalized quote from brader mon. hoping that price will be competitive enough at landed cost for the power cord (remember that brader audio junkie is now at kuwait). calling calling braders jim and xtian, baka interested din kayo at kung sino sino pang mga braders in crime diyan.

para makamura tayo sa shipping.

if price is reasonably competitive am proposing we pay 50% upfront para di naman talo si brader mon and deposit another 50% upon confirmation of shipment. this is of course assuming ok tayo lahat sa price at di naman talo si brader mon. everybody happy ika nga.

brader mon kaya ba to? para maglaway lang ng konti ang mga iba pang interesado diyan!

thanks!

byron · « **Reply #772 on:** Jul 13, 2008 at 09:54 PM »

brader Jake,
nasa magkano ang range na tinitignan natin chief?

Panmunjom · « **Reply #773 on:** Jul 13, 2008 at 10:28 PM »

wow!

sama naman po ako dyan please. thanks.

ǝʞɐɾ ʎzzɐɾ · « **Reply #774 on:** Jul 13, 2008 at 10:30 PM »

Quote from: byron on Jul 13, 2008 at 09:54 PM

brader Jake,
nasa magkano ang range na tinitignan natin chief?

naku brader byron mahirap magbigay ng presyo ng hindi pa final kay brader audio junkie. would rather wait for his final quote. baka magabono ako niyan.