Decided to put the old screen and PJ back this weekend. The keyword here is "old". This just gives me more reason to upgrade both the screen and PJ..hopefully, by Christmas.
Kailangan na talaga as you will see how the pics/images are below. Anyway, my intent is to continue using the flat panel during daytime and have a choice between PJ and flat panel in the evenings for viewing SD primarily.
So now, I have the LCD at the bottom and the PJ screen at the rear of the flat panel...right above it.
Sony 46W300A
Screen technology:LCD
Diagonal screen size:46 inch
Aspect ratio16:9
Additional features:Bravia Engine EX; WCG-CCFL; x.v.Color; 1080p24 input-ready; Bravia Threater Sync (HDMI-CEC); triple HDMI terminals.
Dimensions:(HxWxD)1135 x 734 x 122 mm
Weight:28.5 kgAudio
Surround effects:S-Force
Total output power:11W x 2 Video
Video inputS-video, VGA, Composite video, Component video
Contrast ratio16000:1
Additional features1920 x 1080 resolution; 500cd/m2 brightness; 8ms response time; 178-degree viewing angle; Full-HD-ready.
I got the projector maybe 7-8 years ago, if not longer. First of all, it's a data PJ and not an HT PJ.
So, kakahiya man ang images, I guess it will do for now until a get a new set.
Help na lang with the tweaking of colors and adjustments mga bros. I just like to maximize what I have at the moment.
I think it will be quite obvious that there is very little I can do with the PJ as you see the specs below:
(hooked up RCA Video input...will change to S video)
PLUS UP1100 (data projector) :'(
Single chip DMD (Digital Micro Device) 1024X768
Manual zoom/manual focus: F 3.0 f = 35.0 to 45.5 mm
Metal Halide lamp 280W
Image size: 24 to 300 inches diagonal
Projection Distance: 1.2 to 12.3 m
Light Output: 1000 ANSI lumens :'(
Contrast Ratio: 500:1 :'(
Color Temperature: 7000 Kelvin
Video Inputs: NTSC/PAL/SECAM/NTSC4.43/RGB (H:15 to 60 kHz, V: 50 to 85 Hz)
Video Bandwidth: 60 MHz
Color Reproduction: Full Color 16.7 million colors
Horizontal Resolution: NTSC 550, PAL 550, SECAM 350, NTSC 4.43 350 Tv lines
RGB 1024 dots horizontal, 768 dots vertical
So, how do I make the image on PJ a little better? Adjustments?
It has the usual brightness, contrast, color, tint and sharpness adjustments.
For white balance, it takes me to a screen where I can play with the brightness R, G, B and contrast R, G, B.
For gamma, it just toggles me to Normal, Natural 1 and Natural 2.
TIA