Author Topic: version 3 ht (Read 21028 times)

nvektus · « **Reply #90 on:** Apr 12, 2017 at 09:13 AM »

mdf flat packs are also sold with these kits but i didn't buy them. i figured that these volt speakers are small enough that my carpenter will have no problem making them. i had the boxes made out of marine plywood. partially shown under the boxes is the stage.

nvektus · « **Reply #91 on:** Apr 12, 2017 at 09:18 AM »

stage is filled with sand. the rectangular metal frame hanging in the middle is for the screen.

nvektus · « **Reply #92 on:** Apr 12, 2017 at 01:31 PM »

gluing the boxees for the fusion 12 tempest. i bought the flat pack for this and it was really easy to put together. if you don't have
enough clamps... use whatever

nvektus · « **Reply #93 on:** Apr 12, 2017 at 01:34 PM »

this one is the center channel... fusion 8 alchemy. used only glue for all the mdf boxes.

nvektus · « **Reply #94 on:** Apr 12, 2017 at 01:41 PM »

these are the 4cuft subwoofers. made out of marine plywood... glued and screwed. this are covered with two layers of plywood btw, just like the fusion 12.

nvektus · « **Reply #95 on:** Apr 13, 2017 at 06:38 PM »

bench testing the volts making sure the crossovers works properly.

nvektus · « **Reply #96 on:** Apr 13, 2017 at 06:42 PM »

making sure the surround boxes fit in the column. all 6 columns will be filled with rockwool.

shoktongxxx · « **Reply #97 on:** Apr 13, 2017 at 10:51 PM »

wow! nice HT..

nvektus · « **Reply #98 on:** Apr 14, 2017 at 09:03 AM »

Quote from: shoktongxxx on Apr 13, 2017 at 10:51 PM

wow! nice HT..

thank you sir :-)

nvektus · « **Reply #99 on:** Apr 14, 2017 at 09:29 AM »

applied automotive putty on all the outside joints then sanded the whole box and painted with primer. sealant (caulk) was also applied on the joints for the inside part.

JeromeA · « **Reply #100 on:** Apr 14, 2017 at 11:15 PM »

sir congrats. lupit!

Nelson de Leon · « **Reply #101 on:** Apr 15, 2017 at 12:57 AM »

Ang ganda and ang sarap naman niyan sir. Last 2010 when I built my HT room there were still limited options for in-wall and in-ceiling speakers kaya I had to improvise for the hidden speakers..

ndotcom · « **Reply #102 on:** Apr 15, 2017 at 10:08 AM »

Nice builds and flat packs. Congrats!

Is this local or abroad?

comet · « **Reply #103 on:** Apr 15, 2017 at 10:15 AM »

Anong placement mo for the atmos surrounds? In ceiling yung DIY speakers?

nvektus · « **Reply #104 on:** Apr 15, 2017 at 10:40 AM »

Quote from: Emorej2015 on Apr 14, 2017 at 11:15 PM

sir congrats. lupit!

Thank you sir :-)

nvektus · « **Reply #105 on:** Apr 15, 2017 at 10:59 AM »

Quote from: Nelson de Leon on Apr 15, 2017 at 12:57 AM

Ang ganda and ang sarap naman niyan sir. Last 2010 when I built my HT room there were still limited options for in-wall and in-ceiling speakers kaya I had to improvise for the hidden speakers..

thank you sir Nelson. the volt 6 are coaxial speakers so they work well in-walls and great for surrounds and atmos. the lcr's with the subs are setup behind the front false wall so i don't know if i would still call that in-wall?

nvektus · « **Reply #106 on:** Apr 15, 2017 at 11:00 AM »

Quote from: ndotcom on Apr 15, 2017 at 10:08 AM

Nice builds and flat packs. Congrats!

Is this local or abroad?

Thank you sir...local lang!

nvektus · « **Reply #107 on:** Apr 15, 2017 at 11:02 AM »

Quote from: comet on Apr 15, 2017 at 10:15 AM

Anong placement mo for the atmos surrounds? In ceiling yung DIY speakers?

in-ceiling ang atmos and inside the columns naman surrounds sir.

bongchillog · « **Reply #108 on:** Apr 15, 2017 at 11:18 AM »

Ang ganda siguro neto diy lahat.

Sent from my iPhone using Tapatalk

nvektus · « **Reply #109 on:** Apr 15, 2017 at 12:02 PM »

Quote from: bongchillog on Apr 15, 2017 at 11:18 AM

Ang ganda siguro neto diy lahat.

Sent from my iPhone using Tapatalk

thank you sir! enjoying the ht with the zidoo player i bought from you. i got it setup to launch kodi from startup. it's been years since i used xbmc... i switched to plex back then dahil mas madali i-setup. but now mukhang madali na isetup xbmc hindi kagaya noon na mabusisi.

nvektus · « **Reply #110 on:** Apr 15, 2017 at 12:36 PM »

a couple of coats of black paint, screwed the crossover boards inside and lined with polyfill. since all these speakers will be hidden anyway i'm not to critical about the finished paint.

you could see the huge waveguide and compression driver on top of the fusion 12.

one of the 15" subwoofer driver. also installed rubber feet and handles.

crazyhog · « **Reply #111 on:** Apr 15, 2017 at 12:44 PM »

how to be u sir

... ganda ng diy mo sir.

Sent from my iPhone using Tapatalk

ndotcom · « **Reply #112 on:** Apr 15, 2017 at 08:22 PM »

Quote from: nvektus on Apr 15, 2017 at 11:00 AM

Thank you sir...local lang!

Locally available mga flatpacks at kits sir?

bongchillog · « **Reply #113 on:** Apr 16, 2017 at 02:21 AM »

Quote from: nvektus on Apr 15, 2017 at 12:02 PM

thank you sir! enjoying the ht with the zidoo player i bought from you. i got it setup to launch kodi from startup. it's been years since i used xbmc... i switched to plex back then dahil mas madali i-setup. but now mukhang madali na isetup xbmc hindi kagaya noon na mabusisi.

Ikaw pala to sir Joel. Sarap makiaudition neto pag natapos. Cavite pala. Hehe

Sent from my iPhone using Tapatalk

nvektus · « **Reply #114 on:** Apr 16, 2017 at 09:35 AM »

Quote from: crazyhog on Apr 15, 2017 at 12:44 PM

how to be u sir ... ganda ng diy mo sir.

Sent from my iPhone using Tapatalk

thank you sir :-)

nvektus · « **Reply #115 on:** Apr 16, 2017 at 09:40 AM »

Quote from: ndotcom on Apr 15, 2017 at 08:22 PM

Locally available mga flatpacks at kits sir?

i bought the kits and flatpacks online from a US company sir. pina-ship ko na lang sa relatives ko to pinas. you can also use one of those shipping companies like forex or pobox.

nvektus · « **Reply #116 on:** Apr 16, 2017 at 10:26 AM »

with the drivers installed for the fusion 12 and 8, and volt 6's.

Nelson de Leon · « **Reply #117 on:** Apr 19, 2017 at 09:38 AM »

Sir yun surround speakers are full range speakers?

Sent from my ASUS_Z012D using Tapatalk

nvektus · « **Reply #118 on:** Apr 19, 2017 at 03:45 PM »

Quote from: Nelson de Leon on Apr 19, 2017 at 09:38 AM

Sir yun surround speakers are full range speakers?

Sent from my ASUS_Z012D using Tapatalk

2-way sya sir. yung tweeter nya ay compression driver attached on the back of the woofer. may butas sa gitna yung magnet ng woofer at doon nakalusot yung tweeter and fires through the center of the woofer.

Nelson de Leon · « **Reply #119 on:** Apr 19, 2017 at 07:53 PM »

Quote from: nvektus on Apr 19, 2017 at 03:45 PM

2-way sya sir. yung tweeter nya ay compression driver attached on the back of the woofer. may butas sa gitna yung magnet ng woofer at doon nakalusot yung tweeter and fires through the center of the woofer.

Looks like an awesome project sir. If possible sir, can you post pictures of how the tweeter is installed and its location relevant to the front of the woofer. Bale nasa likod (hidden) siya ng dust cap?

Sent from my ASUS_Z012D using Tapatalk