Topic: Louie's 4K ATMOS Home Cinema

[Timithekid]

Wait nga pala san niyo puwesto yung edimax as i believe via wired pa din from linksys to edimax e di ganun din may wired ka papunta edimax and wired to pio. Ang gugulo niyo amf..

Kulit mo elms! The edimax will receive a signal via wifi and can be placed beside the pio for a wired connection.

[raider125jeigh]

Yes! Accesspoint dapat, technically its like having 2 routers pero yung isa hindi bumabato ng wireless signal,parang hub lang ang function.

switch naman brader - huwag HUB haha...isa lang gagana dyan at a time hehe... dumb switch lol


louie
try mo muna ung steps na binigay ko sayo....
just need to figure out wireless bridge vs access point
ung edimax need natin naka turn on ung DHCP nya

[raider125jeigh]

Wait nga pala san niyo puwesto yung edimax as i believe via wired pa din from linksys to edimax e di ganun din may wired ka papunta edimax and wired to pio. Ang gugulo niyo amf..

e mas maiksi na ung kelangan....ampf....

[raider125jeigh]

http://www.edimax.pl/images/Image/ImageCenter/Router_UI/index.asp.htm

DHCP Server :
dapat enable to....

check mo to paguwi...

[♡ lvcdg23™ ✌]

switch naman brader - huwag HUB haha...isa lang gagana dyan at a time hehe... dumb switch lol


louie
try mo muna ung steps na binigay ko sayo....
just need to figure out wireless bridge vs access point
ung edimax need natin naka turn on ung DHCP nya

Teka sis ano bang steps yan?
Hehehe

[≧◉◡◉≦xrampage≧◉◡◉≦]

Kaya nga so parang mas okay pa din latag ka na lang ng mahabang lan cable tha linksys lan cable to edimax and lan cable going PIO.

[≧◉◡◉≦xrampage≧◉◡◉≦]

e mas maiksi na ung kelangan....ampf....

Panong mas maiksi? Eh lan going to edimax? san mo puwesto yung edimax? then lan edimax to pio? Sige explain mo pano maiksi yan? ilalapit mo ung edimax sa pio? Eh yung lan from router to edimax gaano kahaba?

[Timithekid]

Kaya nga so parang mas okay pa din latag ka na lang ng mahabang lan cable tha linksys lan cable to edimax and lan cable going PIO.

Hindi kailangan wired yung edimax elmer langhiya ka naman eh.  Kung mag wired si louie then he wouldnt need the edimax altogether. The edimax will grab a signal via wifi nga.

[raider125jeigh]

Panong mas maiksi? Eh lan going to edimax? san mo puwesto yung edimax? then lan edimax to pio? Sige explain mo pano maiksi yan? ilalapit mo ung edimax sa pio? Eh yung lan from router to edimax gaano kahaba?

anak ng tokwa ka naman eh.... nagegets mo ba???

Linksys to EDIMAX via wireless..... then EDIMAX to pio via LAN kahit isang dangkal na lan cable itabi nya edimax kay pio

[≧◉◡◉≦xrampage≧◉◡◉≦]

Hindi kailangan wired yung edimax elmer langhiya ka naman eh.  Kung mag wired si louie then he wouldnt need the edimax altogether. The edimax will grab a signal via wifi nga.

Sorry ha accesspoint kasi sa ofc from modem ni pldt wired to the access point device not wireless. So from the access point dun connect mga ipad or any handheld device. Nakuha ko naman ang sinasabi niyo pero is the edimax capable such? Ano pala ang idadaan sa connectivity na yan going to PIO?

[raider125jeigh]

Teka sis ano bang steps yan?
Hehehe

eto
) Click on “Basic Setting”, then select “Universal Repeater”
”ESSID” is the SSID of this new repeater.
“Root AP SSID” is the SSID of the root-AP.
Set “Channel” to be same as the root-AP.
 Click “Apply” to save the setting.
(When using encryption, which we strongly suggest, please make the appropiate
settings at “Security”.
9) Click “Apply” again to reboot the AP to make the changes.
After the reset, please make sure your device is connected to the root-AP.
To do this click on “Home”, and see the status of “Wireless Repeater Interface
Configuration”, and check if it says “Connected”.

[raider125jeigh]

Ano pala ang idadaan sa connectivity na yan going to PIO?

tinatanong mo yan ibig sabihin hindi mo nagets....
LAN Cable nga.....maiksi....

[≧◉◡◉≦xrampage≧◉◡◉≦]

anak ng tokwa ka naman eh.... nagegets mo ba???

Linksys to EDIMAX via wireless..... then EDIMAX to pio via LAN kahit isang dangkal na lan cable itabi nya edimax kay pio

Censya na guys pero even PLDT via wired ang repeater nila like PLDT modem to cisco device to 4 PLDT wireless. IK think what you are figuring out need a device that is not edimax via  router wireless to AP not wired and AP should has a lan port.

tinatanong mo yan ibig sabihin hindi mo nagets....
LAN Cable nga.....maiksi....

Di mo nagets di ba kanina ko pa sinasabi na wired to PIO ang ung connectivity like stream ng music or others. 

[Timithekid]

tinatanong mo yan ibig sabihin hindi mo nagets....
LAN Cable nga.....maiksi....

Kahit 3 inches pwede na length kasi pwede mo itabi sa pio. Isipin mo na lang elms na isa syang malaking dongle na connected via LAN PORT NG PIO.

[♡ lvcdg23™ ✌]

eto
) Click on “Basic Setting”, then select “Universal Repeater”
”ESSID” is the SSID of this new repeater.
“Root AP SSID” is the SSID of the root-AP.
Set “Channel” to be same as the root-AP.
 Click “Apply” to save the setting.
(When using encryption, which we strongly suggest, please make the appropiate
settings at “Security”.
9) Click “Apply” again to reboot the AP to make the changes.
After the reset, please make sure your device is connected to the root-AP.
To do this click on “Home”, and see the status of “Wireless Repeater Interface
Configuration”, and check if it says “Connected”.

Ah ok.
Cge sis gawin ko yan pag-uwi agad.
Promise!!! Thanks

ANg kulit mo Reyna Elmira!!!
Hehehe!!!

[Timithekid]

Censya na guys pero even PLDT via wired ang repeater nila like PLDT modem to cisco device to 4 PLDT wireless. IK think what you are figuring out need a device that is not edimax via  router wireless to AP not wired and AP should has a lan port.

Di mo nagets di ba kanina ko pa sinasabi na wired to PIO ang ung connectivity like stream ng music or others. 

Sis if you read up the wireless adapter of pioneer it functions the way we described what we are trying to achieve with the edimax, wether the edimax can do that or not is what we are trying to find out, comparimg it to pldt has no relevance whatsoever.

[raider125jeigh]

Censya na guys pero even PLDT via wired ang repeater nila like PLDT modem to cisco device to 4 PLDT wireless. IK think what you are figuring out need a device that is not edimax via  router wireless to AP not wired and AP should has a lan port.

huh? pakiulit hehe...

eto ung connection

Modem Router via Linksys
Linksys to Edimax connected wirelessly

edimax will be connected to pio sa LAN

louie....sinu sinu gumagamit ng linksys router mo?

[raider125jeigh]

gagana yan louie....
si elmer pagaganahin ko afterwards

[≧◉◡◉≦xrampage≧◉◡◉≦]

Bahala kayo sige na panalo na kayo...

[raider125jeigh]

Ah ok.
Cge sis gawin ko yan pag-uwi agad.
Promise!!! Thanks

ANg kulit mo Reyna Elmira!!!
Hehehe!!!

sige ...maganda set mo ng static ip si pioneer...
lintek gusto ko tuloy pumunta sa inyo..kung may koste lang e...
dale lang yan...
CCNA ako....haha.....frustrated...tinamad - nag asawa na e...lol

[raider125jeigh]

Bahala kayo sige na panalo na kayo...

good good good.....langya naman kasing suggestion...magwired connection tsk tsk tsk...

[Timithekid]

gagana yan louie....
si elmer pagaganahin ko afterwards

Derick yung pinost ni louie na netgear yan din yung naconsider ko kasi cheapest alternative to the pio adapter kaya nagsuggest ako nyan, but i found out na may edimax kaya sabi ko tanongin rin kayo kasi baka,makatipid si sis louie.  Gagana yan, proper settings lang.  As long as the edimax can function the way its described sa site nila.

[raider125jeigh]

) Click on “Basic Setting”, then select “Universal Repeater”
”ESSID” is the SSID of this new repeater.
“Root AP SSID” is the SSID of the root-AP.
Set “Channel” to be same as the root-AP.
 Click “Apply” to save the setting.
(When using encryption, which we strongly suggest, please make the appropiate
settings at “Security”.
9) Click “Apply” again to reboot the AP to make the changes.
After the reset, please make sure your device is connected to the root-AP.
To do this click on “Home”, and see the status of “Wireless Repeater Interface
Configuration”, and check if it says “Connected”.


pagtapos nyan...ikabit mo muna ung laptop mo via wired check mo kung anung ip address...
mag ipconfig /all ka
check mo gateway ip and ip address ng laptop

[Timithekid]

sige ...maganda set mo ng static ip si pioneer...
lintek gusto ko tuloy pumunta sa inyo..kung may koste lang e...
dale lang yan...
CCNA ako....haha.....frustrated...tinamad - nag asawa na e...lol

Kung magagawa nyang static ip yng pio better for the ios app, he wont need to refresh everytime he connects to the pioneer from a shutdow mode.

[raider125jeigh]

Kung magagawa nyang static ip yng pio better for the ios app, he wont need to refresh everytime he connects to the pioneer from a shutdow mode.

yup madali lang un...as ip address coming from pio will be coming from EDIMAX
lahat yan coconnect naman wirelessly at Lan kasi dhcp ung devices(two routers)..
focus lang on how the internet connection from modem will be transferred to both router

[≧◉◡◉≦xrampage≧◉◡◉≦]

first you probably need to turn of the DHCP server on the linksys, also when you connect through wireless do you get your DHCP address from the edimax or the linksys, also makesure the linksys is set to gateway mode not router. other than that you may need to use the linksys as the main router and hook up your edimax as a gateway/switch, also make sure the ip addresses of the edimax and linksys aren't conlficting, other than that i have no idea, if it were me and i needed the extra lan ports i would just buy the linksys router/ap and a switch and hook it up that way , i hope this helps, sorry if i couldn't be of more help as i am new to this kind of setup as well.

Source: http://forums.bit-tech.net/showthread.php?t=93307

[ndotcom]

yup madali lang un...as ip address coming from pio will be coming from EDIMAX
lahat yan coconnect naman wirelessly at Lan kasi dhcp ung devices(two routers)..
focus lang on how the internet connection from modem will be transferred to both router

nosebleed na ko sa mga posts dito ah....

mustamos braders....

[raider125jeigh]

first you probably need to turn of the DHCP server on the linksys, also when you connect through wireless do you get your DHCP address from the edimax or the linksys, also makesure the linksys is set to gateway mode not router. other than that you may need to use the linksys as the main router and hook up your edimax as a gateway/switch, also make sure the ip addresses of the edimax and linksys aren't conlficting, other than that i have no idea, if it were me and i needed the extra lan ports i would just buy the linksys router/ap and a switch and hook it up that way , i hope this helps, sorry if i couldn't be of more help as i am new to this kind of setup as well.

Source: http://forums.bit-tech.net/showthread.php?t=93307

elms hindi ganyan ung gustong setup ni louie
nageenglish ka ah...heheh

base dyan sa sinasabi mo mas madaling connection yan

modem to Linksys(dhcp off)  to edimax(dhcp) as main router

ang connection na need paganahin

modem to linksys(main router dhcp ) to edimax (dhcp as well for the LAN)

[raider125jeigh]

nosebleed na ko sa mga posts dito ah....

mustamos braders....

haha...eto panay pinoydvd haha...
yari ako dami ko trabaho LOL

[Timithekid]

first you probably need to turn of the DHCP server on the linksys, also when you connect through wireless do you get your DHCP address from the edimax or the linksys, also makesure the linksys is set to gateway mode not router. other than that you may need to use the linksys as the main router and hook up your edimax as a gateway/switch, also make sure the ip addresses of the edimax and linksys aren't conlficting, other than that i have no idea, if it were me and i needed the extra lan ports i would just buy the linksys router/ap and a switch and hook it up that way , i hope this helps, sorry if i couldn't be of more help as i am new to this kind of setup as well.

Source: http://forums.bit-tech.net/showthread.php?t=93307

Elms parang hindi applicable because the pio wont connect wirelessly, its wired to the edimax.  Also, if you turn dhcp off at yhe router then that shuts the whole house down.  The statement about using the edimax as a switch is what i said awhile ago.