Author Topic: Tonearm's wand tweak...  (Read 9893 times)

0 Members and 1 Guest are viewing this topic.

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Tonearm's wand tweak...
« on: May 13, 2011 at 09:45 PM »
I've read this twaek at AudioKarma's forum and I tried... ;D
the purpose is to reduce resonance and vibrations from the tonearm.




wrapped the wand with plumber's teflon...it will cost almost nothing and will not ruin
anything in your turntable. Others use shrinkable tubes but i find teflon lighter than that.

I got a favorable result... try it to find out  ;D ;D ;D
if there's none in your ears then you can easily remove it.

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #1 on: May 13, 2011 at 10:01 PM »

Nice, Idea Father!  :o 

will try it to my SME and Technics ...  :)
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #2 on: May 13, 2011 at 10:05 PM »
Nice, Idea Father!  :o 

will try it to my SME and Technics ...  :)

yup brader AJ....i already tried it on my SME 3009... next will be the RB250  ;D

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #3 on: May 13, 2011 at 10:16 PM »
yup brader AJ....i already tried it on my SME 3009... next will be the RB250  ;D

I guess we got same SME model:


Technics:


 :)

Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #4 on: May 13, 2011 at 10:51 PM »
yup...the same model brader AJ



just finished doing it with the Rb250  ;D




Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #5 on: May 13, 2011 at 11:10 PM »
yup...the same model brader AJ



just finished doing it with the Rb250  ;D





WoW!  :o  :o Kambal Father!... :D

Got to run to hardware tonight and grab some teflon rolls... :)

by the way, any initial impressions Father?...  :)
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #6 on: May 13, 2011 at 11:19 PM »
great improvements on focus...nabawasan ang rumble brader  ;D

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #7 on: May 13, 2011 at 11:40 PM »
great improvements on focus...nabawasan ang rumble brader  ;D

Wow!  :o Cool!  8) really have to try it...  :)

any particular plumber's teflon brand or made from?... ;D  :D What I saw here are made in UK or Japan... :)

Actually, I had used lot of them when I made VH audio inspired DIY power cable...


sorry for the OT.
 ;D
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #8 on: May 13, 2011 at 11:57 PM »
any brand will do brader...  ;D
or you may try shrinkable tubes if available from your abubots  :D

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #9 on: May 14, 2011 at 12:06 AM »

Both materials can be sourced easily here, but I would prefer teflon ...  :)
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #10 on: May 14, 2011 at 12:09 AM »
Both materials can be sourced easily here, but I would prefer teflon ...  :)

right...mas magaan at mas madaling alisin kung sakali at walang epekto para syo brader  ;D

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #11 on: May 15, 2011 at 09:30 PM »
Both materials can be sourced easily here, but I would prefer teflon ...  :)

have you done the tweak brader AJ?

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #12 on: May 15, 2011 at 10:00 PM »
have you done the tweak brader AJ?

Tonight Fr. Jim, already got 2 teflon rolls and need to listen first without the bandage and compare after. Came late last night and was so tired to perform the operation... :D
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline at_sunset_blvd

  • Trade Count: (+668)
  • PinoyDVD Legend
  • *****
  • Posts: 6,312
  • ReLax & ClosE YoUr EyEs, FeeL tHe tOneS
  • Liked:
  • Likes Given: 237
Re: Tonearm's wand tweak...
« Reply #13 on: May 17, 2011 at 07:15 AM »
Father Jim nice simple tweak ;) I'll try this also if I'll have the time. Did you guys just roll it up w/ the tonearm installed or took it out? Pasensya na guys I'm not very good when it comes to dismantling tone arms & cartridges, only have the ears for listening w/ my TT ;D
The NeverEnding World of Tweak'n...

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #14 on: May 17, 2011 at 09:45 AM »
Tried it last night on my SME arm. It was quite late so the bandage is not smooth. Rolled it up with arm in place and I realized that it's really difficult to handle such delicate part of TT.

The result is very positive, as Fr. Jim already mentioned the difference is very audible and even ticks were reduced.   :o 




I'll do next my technics tonight ...  :)
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline JoeyGS

  • Trade Count: (+28)
  • PinoyDVD Legend
  • *****
  • Posts: 2,717
  • Let your ears decide!
  • Liked:
  • Likes Given: 181
Re: Tonearm's wand tweak...
« Reply #15 on: May 17, 2011 at 01:23 PM »
Just check out cause if ticks were reduced, then transparency may have been reduced.  IMO, if the rumble is reduced, transparency will increase and all inherent noises such as tick and pops due to the vinyl dirt will be more apparent.  Sometimes too much damping of the tonearm can also do harm.  You can experiment on how much teflon is wrapped around the arm



Tried it last night on my SME arm. It was quite late so the bandage is not smooth. Rolled it up with arm in place and I realized that it's really difficult to handle such delicate part of TT.

The result is very positive, as Fr. Jim already mentioned the difference is very audible and even ticks were reduced.   :o  




I'll do next my technics tonight ...  :)
« Last Edit: May 17, 2011 at 01:24 PM by JoeyGS »

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #16 on: May 17, 2011 at 09:42 PM »
Just check out cause if ticks were reduced, then transparency may have been reduced.  IMO, if the rumble is reduced, transparency will increase and all inherent noises such as tick and pops due to the vinyl dirt will be more apparent.  Sometimes too much damping of the tonearm can also do harm.  You can experiment on how much teflon is wrapped around the arm


Thanks for the heads up sir!  :)

eventhough I recalibrated the TF after wrapping?

maybe if I got time to restart the process and test every complete wrap cycle from end to end of the arm...  :-\
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #17 on: May 18, 2011 at 01:16 PM »
Father Jim nice simple tweak ;) I'll try this also if I'll have the time. Did you guys just roll it up w/ the tonearm installed or took it out? Pasensya na guys I'm not very good when it comes to dismantling tone arms & cartridges, only have the ears for listening w/ my TT ;D

no need to dismantle tonearm and cart....just put the stylus guard on while wpapping
just to protect it. goodluck bro  ;D


Tried it last night on my SME arm. It was quite late so the bandage is not smooth. Rolled it up with arm in place and I realized that it's really difficult to handle such delicate part of TT.

The result is very positive, as Fr. Jim already mentioned the difference is very audible and even ticks were reduced.   :o 




I'll do next my technics tonight ...  :)

congrats brader AJ...i'm enjoying so much the tweak  ;D ;D ;D
Joey is right should not be too thick... it should as thick like your shrinkable tubes. 

Offline brainwashed

  • Trade Count: (+25)
  • DVD Addict
  • ***
  • Posts: 876
  • Brainwashed by our teachers and all their rules!
  • Liked:
  • Likes Given: 2
Re: Tonearm's wand tweak...
« Reply #18 on: May 18, 2011 at 01:28 PM »
just got a bit confused!
so which is which?
will doing the tweak reduce or enhance the ticks?

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #19 on: May 18, 2011 at 02:45 PM »
no need to dismantle tonearm and cart....just put the stylus guard on while wpapping
just to protect it. goodluck bro  ;D


congrats brader AJ...i'm enjoying so much the tweak  ;D ;D ;D
Joey is right should not be too thick... it should as thick like your shrinkable tubes. 

Thanks Fr. Jim... ;D   I'll limit to 2 layers on the Technics arm..  :)
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #20 on: May 18, 2011 at 03:01 PM »
just got a bit confused!
so which is which?
will doing the tweak reduce or enhance the ticks?

it reduced..  but will try on my other arm to compare and will try to set a certain gauge the amount of damping so not to compromize the natural AQ.
« Last Edit: May 18, 2011 at 09:06 PM by audiojunkie »
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #21 on: May 18, 2011 at 06:40 PM »
Thanks Fr. Jim... ;D   I'll limit to 2 layers on the Technics arm..  :)

i did mine by 3 layers... ;D

Offline at_sunset_blvd

  • Trade Count: (+668)
  • PinoyDVD Legend
  • *****
  • Posts: 6,312
  • ReLax & ClosE YoUr EyEs, FeeL tHe tOneS
  • Liked:
  • Likes Given: 237
Re: Tonearm's wand tweak...
« Reply #22 on: May 18, 2011 at 11:14 PM »
no need to dismantle tonearm and cart....just put the stylus guard on while wpapping
just to protect it. goodluck bro  ;D
 

Thanks Father I'll work on this, I will surely sweat on this job ;D
The NeverEnding World of Tweak'n...

Offline audiojunkie

  • Trade Count: (+3)
  • PinoyDVD Legend
  • *****
  • Posts: 9,398
  • >>|<< OB - Dipole Rules >>|<<
  • Liked:
  • Likes Given: 6
Re: Tonearm's wand tweak...
« Reply #23 on: Jul 08, 2011 at 02:50 PM »

Got a chance to mummified my technics arm and got same result as my SME arm. Based on my gage, teflon wrap adds about 2g to the arm, so needs to be recalibrated again to correct VTF setting.


(sorry for crappy pix & this time fitted with pioneer cartridge)

 ;D
Anthem CD1
Anthem Pre1
Audio Linear TT
Ortofon Rondo Red
Theta Dac
GTA SE-40 Amp
JBL L7
AudioQuest

Offline nizmo

  • Trade Count: (+10)
  • DVD Guru
  • ****
  • Posts: 1,602
  • i'm new here.
  • Liked:
  • Likes Given: 1
Re: Tonearm's wand tweak...
« Reply #24 on: Jul 11, 2011 at 09:10 PM »
Got a chance to mummified my technics arm and got same result as my SME arm. Based on my gage, teflon wrap adds about 2g to the arm, so needs to be recalibrated again to correct VTF setting.


(sorry for crappy pix & this time fitted with pioneer cartridge)

 ;D

naks....  ;D ;D ;D
such is a nice cartridge...generic made by Audio Technica.