******************************************************************************************
Pandemic Build
DIY PB3000 clone
Mar 2020 Building the BEAST -
https://www.pinoydvd.com/index.php/topic,157389.msg2714224.html#msg2714224July 2018 Update************************************************************************************************************
Some changes....
Pioneer SX-1250 serving HT and Audio duties,
Audio
Alon Model IV and Rythmik F15 (Both are sealed systems)
HT
JBL L112 and Klipsch SW112 (Both are ported systems)
No Filters, Both speakers are run full range
This is the best setup I have ever had, I always struggled with using one sub for Audio and HT. Audio, lower crossover point vs HT's higher crossover point. Using 2 different sets of speakers for Audio and HT, I no longer have to fiddle with the sub setting. I also enjoy the added benefit of using a ported sub for HT and Sealed for Audio.
***********************************************************************************************************************
Para iwas sa Alikabok
March 2014
Glass covers for my SX-1980
With the SX-1050
May 2012 Update.
I got this unit last April, it WAS dead, no relay click, no sound no anything
Operating on the 270 watt per channel beast
Rebuilding the Power Supply Regulator Board
BEFORE
AFTER
Tone (Bass and treble) Board
Before
AFTER
April 2013 update took some rush photos, hirap iposing at ilipat lipat
My 78 lbs monster...
1979 Pioneer SX-1980
270 WPC @ 8 ohms With my 1976 SX-1050 120 WPC
How does it sound.... its very quiet :-), the relay does not click, hehehe I still need to look at the power supply section.
February 2013 Update
Finally decided to join the bandwagon and added a Sony 46 inch LCD screen to my 2."1" Audio Setup1976 Pioneer SX-1050 Receiver
Rythmik F15 sealed subwoofer
Usher X-719
My favorite part of the cabinet, Volume control knobs for cabinet handles
_______________________________________________________
Added August 2012Pioneer SX1050, circa 1976. 120 WPC
"Nude' photos on page 2
Added July 2012
Onkyo Integrated Amplifier solid state, about 65 watts
Infinity RS 4001 (1989 Model), three way with 8 inch woofer
********************************************
ONE amp, ONE sub, ONE pair speaker and ONE source
August 2011
Speakers :Usher X-719 on DIY 120 Lb stands
Subwoofer : Rythmik F15 kit version
Amplifier : Cayin A-70T, 30 WPC Class A, KT88
Speaker Cables : Xindak SC-01b, 12g Bi-wire.
RCA Cables : DIY Kimber cables
Behind the scenes..actually inside the amp stand
Usb Hub
1 Tb, hard drive
1500 Automatic Voltage Regulator
Source : Acer Netbook into a PHP 150 USB Hub then into a PHP 1500 Behringer UCA202 DAC