Author Topic: AMX Tube Products (Read 718109 times)

rguevarra · « **Reply #5190 on:** Jun 05, 2014 at 05:09 PM »

Sirs,
Saan pwedeng ma-audition yung mga AMX tube amps aside sa Las Pinas store nila?
Meron bang ibang mga local dealers?

Thanks

fredreadrick · « **Reply #5191 on:** Jun 11, 2014 at 08:35 AM »

Quote from: rguevarra on Jun 05, 2014 at 05:09 PM

Sirs,
Saan pwedeng ma-audition yung mga AMX tube amps aside sa Las Pinas store nila?
Meron bang ibang mga local dealers?

Thanks

Sir,
Sa residence nya lang puwede, wala na syang ibang pwesto.
Pero meron naman mababait na members dito sa pDVD na willing to audition their own AMX gears.
Meron akong Aria & Forte, malapit lang ako s SM Molino. Pwede ko parinig sa 'yo.

endrik35 · « **Reply #5192 on:** Sep 13, 2014 at 08:42 PM »

Asked Mang Andrew to build me a tube phonostage based on David Manley's design. Requested it to be dual mono hence the separate and hefty power supply unit. . .

Innards of phono preamp using four 12ax7's

*back panel*

*back panel of PSU*

*PSU cords. . .

*PSU innards. . .

Had some palo china wood as preamp and PSU case, replaced the steel fascia with acrylic.
Bought Dymo yesterday for labeling and had a brass plaque fabricated in honor of the late "David Manley". . .

Sound is detailed, sweet with a very low noise floor(Probably because of the substantial PSU)
Thanks Mang Andrew and more power to AMX!

xbase · « **Reply #5193 on:** Sep 14, 2014 at 11:24 AM »

beautiful phono stage inside and outside!

questforthegoodlife · « **Reply #5194 on:** Sep 14, 2014 at 12:05 PM »

subscribing to this thread! Want to venture into the world of tubes!

docrob · « **Reply #5195 on:** Sep 14, 2014 at 01:26 PM »

nicely built tube phonostage, well done!

bennjude19 · « **Reply #5196 on:** Nov 28, 2014 at 10:26 AM »

I just recently acquired an AMX Tube amp model "Rhapsody" from a friend ? But can't find any info on AMX site. Anybody who can give me what the specs and configuration of this amp. It uses 2pcs 300B and 2pcs ECC99 and 2 more peanuts tube which my weary eyes can't read anymore dahil medyo burado na at malabo na ang markings. Anong year model po kaya ito? Pics below for reference...TIA

parasound · « **Reply #5197 on:** Nov 29, 2014 at 08:22 PM »

Ayos.. Daan patungo sa 15" Audio Nirvana.

bennjude19 · « **Reply #5198 on:** Dec 02, 2014 at 08:27 PM »

Quote from: parasound on Nov 29, 2014 at 08:22 PM

Ayos.. Daan patungo sa 15" Audio Nirvana.

OK na ako bro sa 10" CF na AN Speakers ko, maliit lang naman listening area ko

parasound · « **Reply #5199 on:** Dec 02, 2014 at 08:38 PM »

Ok na nga yun.. Next will be the Sopia Mesh Plate 300B. Pm kita pag nsa pinas ako..

bennjude19 · « **Reply #5200 on:** Dec 02, 2014 at 08:43 PM »

Quote from: parasound on Dec 02, 2014 at 08:38 PM

Ok na nga yun.. Next will be the Sopia Mesh Plate 300B. Pm kita pag nsa pinas ako..

Ayos pasyal ka sa Garage Shop ko ng mabawasan ang mga plaka dito hehe

yatake tombi · « **Reply #5201 on:** Dec 03, 2014 at 05:05 PM »

Sir,
magkano inabot dito sa project na to?

Quote from: endrik35 on Sep 13, 2014 at 08:42 PM

Asked Mang Andrew to build me a tube phonostage based on David Manley's design. Requested it to be dual mono hence the separate and hefty power supply unit. . .

Innards of phono preamp using four 12ax7's

*back panel*

*back panel of PSU*

*PSU cords. . .

*PSU innards. . .

Had some palo china wood as preamp and PSU case, replaced the steel fascia with acrylic.
Bought Dymo yesterday for labeling and had a brass plaque fabricated in honor of the late "David Manley". . .

Sound is detailed, sweet with a very low noise floor(Probably because of the substantial PSU)
Thanks Mang Andrew and more power to AMX!

JojoD818 · « **Reply #5202 on:** Dec 25, 2014 at 12:24 PM »

Merry Christmas AMX!

remington · « **Reply #5203 on:** May 14, 2015 at 10:51 AM »

newly constructed AMX SE KT150 integrated amp

CoolTOYZPH · « **Reply #5204 on:** May 14, 2015 at 11:08 AM »

^ super congratulations!

remington · « **Reply #5205 on:** May 14, 2015 at 03:08 PM »

thanks sir! may konting corrections nalang na gagawin pero over all ganda ng SQ

CoolTOYZPH · « **Reply #5206 on:** May 14, 2015 at 03:29 PM »

^break-in stage is really a test of patience!

geriboy · « **Reply #5207 on:** May 16, 2015 at 03:29 PM »

parang ang laki at mataas ang bago ninyong AMX kt150 amp, sir jun. pwede po makita yung harap at likod nito?

CoolTOYZPH · « **Reply #5208 on:** May 16, 2015 at 04:08 PM »

^ looks like standard size but the face is full front until the height of the KT-150 to avoid the tubes from glowing at eye level. With a full front facing, the glow of the tubes will reflect upwards.

remington · « **Reply #5209 on:** May 16, 2015 at 04:49 PM »

Quote from: geriboy on May 16, 2015 at 03:29 PM

parang ang laki at mataas ang bago ninyong AMX kt150 amp, sir jun. pwede po makita yung harap at likod nito?

ito sir.

http://www.pinoydvd.com/index.php/topic,168459.2610.html

cyberdraven · « **Reply #5210 on:** May 19, 2015 at 12:18 PM »

congrats sir! ganda ng bagong laruan. hehe

remington · « **Reply #5211 on:** May 19, 2015 at 05:09 PM »

thanks

meat_eater · « **Reply #5212 on:** May 28, 2015 at 03:48 PM »

How much ba mga tube phono pre ng AMX?

Thanks!

devo · « **Reply #5213 on:** Sep 07, 2015 at 11:02 AM »

Saan sa Las Pinas ang AMX shop ngayon? Pa include na din phone number ... Thanks.

fredreadrick · « **Reply #5214 on:** Sep 07, 2015 at 11:13 AM »

Quote from: devo on Sep 07, 2015 at 11:02 AM

Saan sa Las Pinas ang AMX shop ngayon? Pa include na din phone number ... Thanks.

Quote from: fredreadrick on Apr 11, 2014 at 04:37 PM

sir, here's the address of sir Andrew.
76 Amelita St. BF Homes Almanza Las Pinas, malapit sa Pilar Village.
Contact # 09175182448 or 7103432

devo · « **Reply #5215 on:** Sep 07, 2015 at 02:30 PM »

Quote from: fredreadrick on Sep 07, 2015 at 11:13 AM

Thanks

joepaps · « **Reply #5216 on:** Feb 26, 2016 at 06:37 PM »

galing ako kina sir andrew before lunch time kanina, pinayos ko kt88-6550 ko more than 2 years di ko nagamit. sarap talaga pakingan ang tube amps.

CoolTOYZPH · « **Reply #5217 on:** Feb 26, 2016 at 06:40 PM »

^ did you see the latest commissioned project of Mang Andrew, a 150Watt Tube Power-AMP using 4 x KT-120 tubes?

joepaps · « **Reply #5218 on:** Feb 26, 2016 at 07:33 PM »

Quote from: CoolTOYZPH on Feb 26, 2016 at 06:40 PM

^ did you see the latest commissioned project of Mang Andrew, a 150Watt Tube Power-AMP using 4 x KT-120 tubes?

yes sir its still on the floor. naka vertical pa.

CoolTOYZPH · « **Reply #5219 on:** Feb 26, 2016 at 09:18 PM »

^ Hoping to hear that soon before it is exported to GB