March 2019:
DEN REBOOT!
Gears:
Marantz Sr7010(for 7.2.4)
Marantz Sr7010 twin( on the way - for front heights, top middle, and back surround
Marantz mm7025 for fronts
Marantz ma500 for center
Behringer nu6000 for subs
Audio Nirvana classic 12 inch x 3 for LCR
Audio Nirvana classic 10 inch x 10 for wides, surrounds, and tops
Audio Nirvana horn 8 inch x 2 for front height( not yet installed
B&C 18tbw100-4 x 1 driver(on the way)
Mach5audio uxl-18 x 2 drivers
Vero 4K+ media player
Dinobot u5 mini media player
Optoma uhd50 4k projector
Belden 1309A 14awg as speaker cables
Royal Cord Phelps Dodges 12/2 cables as subwoofer cables
mogami interconnects
monoprice premium hdmi cables from Anya
qrd from trod93
auralex bass traps and diffusers
acoustic diffusers from sir Nelson
Elite screen acoustically transparent projector screen designer cut 109 inch acousticpro 1080p3 4kuhd ready
Berkline recliners front/ Sofa back(not berkline)
I started the renovation last dec 2017.
Here are the early sketchup models for my renovation:
I chose the blue color for accents.
I removed the cr to increase the size. Size now is 4.8 x 3.5m
trod93 qrd and small diffusers:
preparing binding posts
Ceiling rails for heights:
acoustically transparent screen
Umik +REW for sub/s = nosebleed
sub box dimensions courtesy of LTD02(avsforum) tuning at 17hz:
acoustics
1st reflection side walls
back ceiling qrd
front wall with absorbers and corner bass traps
back small diffusers
putting in place the polyester panels. Aircon nicely tucked on the ceiling with breathing space
forming the front wall for screen
24 inch clearance
adding pampapogi diffusers
added the screen. Take note of my secret sliding door on the left to hide the window:
What’s behind the screen? Let’s see:
My friend Bart showing the uxl18 driver
uhd50
rack - magulo pa
kiddos magulo din hehe
Thanks!!!
OLDER POST:
Hi guys just want to share my den. Small lang po pero just enough for my family. I had the chance to clean the room kaya had the time to do some picture-taking.
Gears:
Marantz sr7008
Emotiva XPA-3 Power Amplifier
Sonus Faber liuto smart(Center)
Sonus Faber Liuto Monitor(left/Right)
NHT Evolution M5/P5(front wides)
NHT Evolution L5(front heights/surrounds)
SVS PB13ultra
SVS SB12NSD
Popcorn hour A300
EPSON 3010 1080P 3D PROJECTOR
Update:
NOV 2012 - REPLACED Mitsubishi HD1000 720p projector to EPSON 3010
DEC 2012 - REPLACED Popcorn hour A210 to A300; EGREAT R6s
FEB 2013 - ADDED channelmaster moca adapters
AUG-SEPT 2013 - REPLACED LCRs to Sonus faber liutos
SEPT 2013 - SPIDER RACK
OCT 2013 - REPLACED ONKYO 3008 to Marantz SR7008
NOV 2013 - ADDED SB-12NSD
PICS:
The AMPS and rack
The 3008 and XPA-3. On top of the 3008 is AV fan by sir Jojo
custom AV rack
The SPEAKERS
NHT M5 as fronts with grills on...
and grills off
NHT M6(top speaker) - my center with the M5s.
THE PROJECTOR
720p projector, ever dependable...already with 2500+ hours
THE ROOM
Custom projector screen - made of one side laminated board cut to 92 inches diagonally. I tried to use the gray laminate as screen kaya lang the picture look washed out(in other words - pangit) so I had it repainted with gray paint. So far so good.
Doors with 4 inch thick acoustic panels.
plates for the surround and surround back channels. Currently the back surrounds plates are used for my front wides. Labels courtesy of my wife
Ceiling with my front heights and a few panels. Sorry baka may mali ako sa placement ko ng front heights, I just placed them as high as they can be, probably 45 degree. They sound nice for me.
Currently shifting from black out roller shades to black out curtains because of gaps present. You may have noticed the vertical cardboards present at the back.
the front wides are a little bit higher than usual kasi ginamit ko yung back surround stands ko. I'll have a lower stand if budget permits na...
L5 speaker, with same drivers as my front M5
Fronts altogether:
update July 27 2012
Additional pics:
URC-R50 got one for my den and for my bedroom:
update Nov 2012
Epson 3010 projector
update Feb 2013 channel master moca adapters:
update Aug-Sept 2013 Sonus Faber liutos for fronts and center:
FOR Q4 2013 - Q1 2014:
Thanks for looking!!