Parts list from David Dicks owner of AN:
Cabinet Construction Suggested Parts List
DO NOT USE PORT TUBES OR DUCTS (Except 5.6). Use only the holes cut in the front baffle as the ports.
Five-Way, Gold Plated Binding Posts (2). To attach speaker wires from the amplifier.
----MCM Electronics #50-1275
Black Mounting Screws--#6 x ¾ inch long wood screws (
. To secure binding posts to cabinets.
-----Parts Express #081-435
Driver Mounting Screws--#10-32 by one inch long machine screws (
or 1 ¼ inch coarse thread drywall screws (
.
----Available at most hardware stores. (Cast frame 10, 12, and 15 inch models require 16 screws to mount a pair)
Driver Mounting Screw 'T' Nuts--#10-32 (
. Use these if you use machine screws. They fit inside the cabinet.
----Parts Express #081-1082
Internal Wire--Two 24 inch lengths of 16 gauge, multistranded copper wire.
----Quality extension cord from any hardware store will do. Cut off the ends.
Female Crimp Connectors--(16-14 gauge .110 inch) Audio Nirvana drivers require (2). Fostex drivers require (4).
----MCM Electronics #28-835 or Parts Express #095-286
Female Crimp Connectors--(16-14 gauge .25 inch) Binding posts require (4). Audio Nirvana drivers require (2).
----Parts Express #095-280
Use Wire Crimping Tool (available at any hardware store) to make up internal speaker wiring. For both cabinets:
----For Binding Post Terminals: Use (4) .25 inch female connectors.
----For Input Terminals on Audio Nirvana Drivers: Use (2) .25 and (2) .110 female connectors.
----For Input Terminals on Lowther Drivers: Terminals tighten on bare wire.
----For Input Terminals on Fostex Drivers: Use (4) .110 female connectors.
----For Input Terminals on PAudio Drivers: Terminals tighten on bare wire.
Cabinet Insulation--We recommend R11, R12, or R13 fiberglass insulation (2 ½ -3 ½ inches thick). Apply to the inside of the top, back, sides, and bottom but not the inside of the front baffle. It should be about 1 inch (25 mm) thick or tall, when installed.
---- Available at most hardware stores. Home Depot has a nice tan color available.
---- Or use MCM Electronics Part #LS00385 Acoustic Wadding Material or LS00916 Acoustic Damping Pad
---- DO NOT USE FOAM FOR DAMPING MATERIAL, ESPECIALLY ‘EGG CRATE’ FOAM.
Staple Gun--Use 1/4 inch staples to attach grill cloth to grill frame (a ‘hot glue’ gun may also be used). Use 9/16 inch staples to attach fiberglass insulation inside the cabinet.
----Available at most hardware stores.
Grill Mounting Hardware (male 'pins' and female 'cups'--8 pairs).
----Parts Express #260-367
Speaker Grill Cloth (black, 1 yard)
----Parts Express #260-335
Magic Switch
----Digi Key SP3T High Current 6 Amp type switch. Part number 360-2072-ND
WHERE TO ORDER:
Digi Key 800-344-4539
Parts Express 800-338-0531
www.partsexpress.comMCM Electronics 800-543-4330
www.mcmelectronics.com