Author Topic: Audio Nirvana Fullrange Speakers - Fair Price, High End SQ (Read 643422 times)

bro bad trip na naman....last night i did test yung speaker ko ok naman na same SQ di nagbago but ngayon umaga ayaw na naman gumana di pa naman ako pumasok, i did test sa ohmeter reading ng ayos na speaker was 007.7 means 8ohms but yung ayaw na naman gumana was 1.791...pinagpalit ko yung right na speaker sa left output ok but yung left to right ayaw talaga...ano kaya problema nito...speaker uli.

tony · « **Reply #2409 on:** Jan 09, 2015 at 08:53 AM »

anong amp ang gamit mo?
try mo sukatan ng dc volts sa speaker terminals,
baka may dc leak yung opt..
yun lang ang naiisip kong pwedeng maging dahilan...
hanggang hindi pa confirmed, gumamit ka ng cheapo test speakers muna...

remington · « **Reply #2410 on:** Jan 09, 2015 at 09:04 AM »

bro willie tama si master tony check mo yung amp yan ang salarin malamang. kung may patapon kang speaker jan test run mo sa amp and see what will happen, meron akong pang test na speakers dito kung wala ka daanan mo nalang. baka isang terminal lang ang naputol this time kaya may reading pa yung AN....kaka lungkot!

camoteque · « **Reply #2411 on:** Jan 09, 2015 at 11:50 AM »

Quote from: kayee on Jan 09, 2015 at 08:33 AM

bro bad trip na naman....last night i did test yung speaker ko ok naman na same SQ di nagbago but ngayon umaga ayaw na naman gumana di pa naman ako pumasok, i did test sa ohmeter reading ng ayos na speaker was 007.7 means 8ohms but yung ayaw na naman gumana was 1.791...pinagpalit ko yung right na speaker sa left output ok but yung left to right ayaw talaga...ano kaya problema nito...speaker uli.

Anong amp ang gamit mo? SS or tube? As Sir Tony had suggested, measure if you DC sa output.

If its any help, you can read the link: http://www.audiokarma.org/forums/showthread.php?t=5634

tony · « **Reply #2412 on:** Jan 09, 2015 at 12:56 PM »

yes, with the common terminal of your dmm connected to common ground on the chassis, measure dc voltage at two terminals and see if there are any dc voltages there....

kayee · « **Reply #2413 on:** Jan 09, 2015 at 08:25 PM »

Quote from: tony on Jan 09, 2015 at 12:56 PM

yes, with the common terminal of your dmm connected to common ground on the chassis, measure dc voltage at two terminals and see if there are any dc voltages there....

check ko bukas sir tony.....meron pa naman ako extra speaker dito...sir bakit kaya sa ohmeter may reading pa rin yung speaker...meaning hindi siya naputol uli....kahit yung SMSL na galing kay arduino ayaw pa rin niya gumana.....check ko na lang bukas sir tony...salamat. jun salamat sa advice din.....

tony · « **Reply #2414 on:** Jan 09, 2015 at 08:38 PM »

willie, if you need to call me for further instructions you can call my landline....

kayee · « **Reply #2415 on:** Jan 09, 2015 at 08:42 PM »

Quote from: tony on Jan 09, 2015 at 08:38 PM

willie, if you need to call me for further instructions you can call my landline....

sir tony wala kami landline sa hauz

i'll try yung naka post nyo dito sir bukas...read ko muna yung right channel dc sir bukas....thanks sir.

kayee · « **Reply #2416 on:** Jan 10, 2015 at 08:25 AM »

Quote from: tony on Jan 09, 2015 at 08:53 AM

anong amp ang gamit mo?
try mo sukatan ng dc volts sa speaker terminals,
baka may dc leak yung opt..
yun lang ang naiisip kong pwedeng maging dahilan...
hanggang hindi pa confirmed, gumamit ka ng cheapo test speakers muna...

sir tony i did na sa isang speaker with DMM negative wire connected to negative output and positive wire connected to positive output -0 ang reading sir and gumagana naman yung speaker both left and right.....yung right channel and may problem ok naman na siya ngayon sa ibang speaker....

remington · « **Reply #2417 on:** Jan 10, 2015 at 09:29 AM »

a yung AN nga ang may problema ! balik mo nalang ulit kay sir benedict bro...

tony · « **Reply #2418 on:** Jan 10, 2015 at 10:18 AM »

Quote from: kayee on Jan 10, 2015 at 08:25 AM

sir tony i did na sa isang speaker with DMM negative wire connected to negative output and positive wire connected to positive output -0 ang reading sir and gumagana naman yung speaker both left and right.....yung right channel and may problem ok naman na siya ngayon sa ibang speaker....

well, at least alam na......

kayee · « **Reply #2419 on:** Jan 10, 2015 at 12:51 PM »

Quote from: tony on Jan 10, 2015 at 10:18 AM

well, at least alam na......

oo nga bro maayos naman yung pagkagagawa di nag bago yung SQ niya....baka naputol uli....kapapatay ko lang yung amp ko today di nagluko meaning speaker talaga yung problem, balik ko kay benidict sa monday...thanks bro....

kayee · « **Reply #2420 on:** Jan 10, 2015 at 12:54 PM »

Quote from: tony on Jan 10, 2015 at 10:18 AM

well, at least alam na......

sir tony thank you sa advice....

may natutunan na naman ako sa inyo....

question lang sir how will i know yung positive and negative connection ng oil capacitor? Radial poh ba pag oil cap?

tony · « **Reply #2421 on:** Jan 10, 2015 at 01:51 PM »

Quote from: kayee on Jan 10, 2015 at 12:54 PM

sir tony thank you sa advice.... may natutunan na naman ako sa inyo.... question lang sir how will i know yung positive and negative connection ng oil capacitor? Radial poh ba pag oil cap?

walang polarity yan, pwede kahit paano kabit mo....

remington · « **Reply #2422 on:** Jan 11, 2015 at 09:33 PM »

fiberglass damping material at the back of my 12" CF...

replaced with sir nelson de leon's acoustic foam diffuser...

directly at the back of the driver...

testing....

after 3 straight hours of critical listening using my flac and wav test track files and foobar as player over musiland03 dragon,6L6 pp tube amp and 6h8 pre amp, the bass improved dramatically, it became tighter no sign of boominess, the ear piercing highs on some of my test tracks tamed and nabawasan yung forward sounding para tuloy lumaki yung listening room ko. Overall mas gumanda ang SQ nung dati nang maganda! Tama si sir nelson malaki ang effect nya sa lows pati ang highs mag iimprove ng malaki. Madami din lumabas na mga bagong tunog na di ko nadidinig dati, pati usapan sa background nung mga live na test tracks ko dinig na dinig. Ayos ito mga braders malaki improvement try nyo hehehe. lalagyan ko din yung box ng 10" ko. Thanks sir nelson de leon for letting us review your acoustic foam absorber malaki nga improvement sa SQ.

Nelson de Leon · « **Reply #2423 on:** Jan 11, 2015 at 10:07 PM »

Quote from: remington on Jan 11, 2015 at 09:33 PM

fiberglass damping material at the back of my 12" CF...

replaced with sir nelson de leon's acoustic foam diffuser...

directly at the back of the driver...

testing....

after 3 straight hours of critical listening using my flac and wav test track files and foobar as player over musiland03 dragon,6L6 pp tube amp and 6h8 pre amp, the bass improved dramatically, it became tighter no sign of boominess, the ear piercing highs on some of my test tracks tamed and nabawasan yung forward sounding para tuloy lumaki yung listening room ko. Overall mas gumanda ang SQ nung dati nang maganda! Tama si sir nelson malaki ang effect nya sa lows pati ang highs mag iimprove ng malaki. Madami din lumabas na mga bagong tunog na di ko nadidinig dati, pati usapan sa background nung mga live na test tracks ko dinig na dinig. Ayos ito mga braders malaki improvement try nyo hehehe. lalagyan ko din yung box ng 10" ko. Thanks sir nelson de leon for letting us review your acoustic foam absorber malaki nga improvement sa SQ.

Thank you very much sir for your review!

remington · « **Reply #2424 on:** Jan 11, 2015 at 11:00 PM »

Thanks din sir for the opportunity and meron ba sir 13""x24""ang size? Kuha sana ako 1pair for my 10""

Nelson de Leon · « **Reply #2425 on:** Jan 11, 2015 at 11:07 PM »

Quote from: remington on Jan 11, 2015 at 11:00 PM

Thanks din sir for the opportunity and meron ba sir 13""x24""ang size? Kuha sana ako 1pair for my 10""

Nakow sorry sir wala eh. I can do cut size kaso mataas sir ang minimum ko. You can cut it naman and hindi siya kita kung sa loob ng speakers. Tyr mo sir, lagareng bakal, hasain mo yun teeth pero hindi tatamaan yun ridges, masmalinis ang hiwa.

remington · « **Reply #2426 on:** Jan 11, 2015 at 11:18 PM »

Ok sir. Will inform you kung kelan makaka punta ulit.

fredreadrick · « **Reply #2427 on:** Jan 19, 2015 at 12:51 AM »

masyadong tahimik....hmmm.
gumalaw lang, share ko kahit drawing pa din
Allow me to introduce AN "Moksha™"

Update to Super 12 AlNico:
After 40days [approx. 300hrs] of burning-in... i can say i attained Nirvana.

shrek7 · « **Reply #2428 on:** Jan 22, 2015 at 07:07 AM »

Ang ganda naman nyan!!! Kainggit naman yung 12 inch Alnico!!!

Ang tahimik dito!!!!

xbase · « **Reply #2429 on:** Jan 22, 2015 at 10:52 AM »

Quote from: fredreadrick on Jan 19, 2015 at 12:51 AM

masyadong tahimik....hmmm.
gumalaw lang, share ko kahit drawing pa din
Allow me to introduce AN "Moksha™"

Update to Super 12 AlNico:
After 40days [approx. 300hrs] of burning-in... i can say i attained Nirvana.

Ganda ng design mo bro. Pwede ba pa copy nyang ganyang design?