Topic: Acer H6510BD

[Moks007]

Haha! Di nakatiis! Congrats bro!

If you have a fixation on a purchase. Whatever comment others would say, you tend to be selective on the positive ones to affirm your purchase and somehow your brain blocks the negative ones. I'm also talking from experience.  Enjoy your PJ!

Hehe, thanks so much doc. Finally get to enjoy bigger screen hehe.

[nerveblocker]

Hehe, thanks so much doc. Finally get to enjoy bigger screen hehe.

Size does matter.  Need to have a beefier audio setup to match the screen size.

[Moks007]

Size does matter.  Need to have a beefier audio setup to match the screen size.

hehe...ya upgrading is addictive..

[Nelson de Leon]

hehe...ya upgrading is addictive..

But rewarding if you really like watching movies.

[DTNS]

But rewarding if you really like watching movies.

having a big display is really a delight to the eyes.

[nerveblocker]

having a big display is really a delight to the eyes.

Until you feel it's small and need a bigger one. Room size is the limiting factor.

[DTNS]

Until you feel it's small and need a bigger one. Room size is the limiting factor.

the screen one uses can also be a limiting factor. I measured the diagonal length of the projected image when I'm watching in 16:9 using my 70"x70" tripod screen. it turns out, I'm only getting a 72" diagonal image in 16:9 aspect ratio! I can get a 100+" image when I project to my white wall. but then again, my room's wall isn't optimized for projected images.

[Onkyo606]

where is this avaialble? its says sa previous page Villman lang? meron bang readily available ito na store?

[DTNS]

where is this avaialble? its says sa previous page Villman lang? meron bang readily available ito na store?

sa Villman at Acer concept stores. by order ang H6510BD. you need to call the branch where you plan to buy and order it beforehand.

[♡ lvcdg23™ ✌]

the screen one uses can also be a limiting factor. I measured the diagonal length of the projected image when I'm watching in 16:9 using my 70"x70" tripod screen. it turns out, I'm only getting a 72" diagonal image in 16:9 aspect ratio! I can get a 100+" image when I project to my white wall. but then again, my room's wall isn't optimized for projected images.

Pabili kana kasi kay Elmer ng 100" Elite motorized screen
For sure mas lalo mong maeenjoy yang Acer PJ mo...

[miccollo]

Tama yun @Elmer.

I just purchased and installed last weekend a 120" motorized screen from sir pekspert. Bitin kse yun free na screen! 

sulit na sulit. now, watching 3D in a 120" screen, 13feet away is a BLAST! 

watching movies is also awesome. parang gusto ko ulitin all of my 5TB worth of movies. hehehe

[ninjababez®]

watching movies is also awesome. parang gusto ko ulitin all of my 5TB worth of movies. hehehe

felt the same way when i had my PJ.  liit lang talaga ng room ko ngayon masikip na ang harap sa gears kaya 60-70" tv lang ang max na pwede

[Onkyo606]

sa Villman at Acer concept stores. by order ang H6510BD. you need to call the branch where you plan to buy and order it beforehand.

thanks a lot sir

[praktikal]

Tama yun @Elmer.

I just purchased and installed last weekend a 120" motorized screen from sir pekspert. Bitin kse yun free na screen! 

sulit na sulit. now, watching 3D in a 120" screen, 13feet away is a BLAST! 

watching movies is also awesome. parang gusto ko ulitin all of my 5TB worth of movies. hehehe

malaking sound maliit na screen = di talaga match at parang hinahatak ng screen ang sound kaya parang humihina tuloy.. ewan kung napapansin nyo. sa maliit na screen di mo ma appreciate ang mga nakakalulang scenes like nahulog sa bangin o habulan na parang tatamaan ka... halos di mo rin maappreciate ang panning ng sound unless mga 1 meter ka lang from a 32-42" screen... hehe

miss ko na tuloy si ax huhuhu...

[DTNS]

malaking sound maliit na screen = di talaga match

hehe! bagay na bagay nga ang GE Aon 3 at ang Acer H6510BD ko. para ngang floorstanders ang tunog ng HK + Aons. kailangan kong hinaan ang volume. rinig ang sound hanggang kabilang kanto.

[Moks007]

Hi guys, sorry for being so kulit , first time owner eh . How do you adjust the picture of this Acer to fit the screen? I bought some shelves sa ace hardware. I just placed this projector on a shelf on the wall behind my bed. Is there like a picture adjust of right, left, up, down? or just the keystone? I tried using the bolt adjustment of the projector on the rear right to lower it but to no avail (hirap pa rin). Pati keystone ayaw eh. Do I have to move the projector mismo to fit the screen? Mahirap ba placing a projector sa shelf (for position wise). I might have to redo the shelf and move it lower. If not, do you guys suggest to just buy a ceiling mount where I can adjust the projector few degrees? Thanks so much.

[ninjababez®]

Bro moks wala kasi lense shift yung pj.  Mano mano talaga yan

[nerveblocker]

Moks007-- wala bang zoom yung Acer? Try to estimate the size of the image that will fit your screen via zoom then adjust accordingly. As what I know ceiling mounts are more flexible than just placing the PJ in a rack.

[Moks007]

Bro moks wala kasi lense shift yung pj.  Mano mano talaga yan

Moks007-- wala bang zoom yung Acer? Try to estimate the size of the image that will fit your screen via zoom then adjust accordingly. As what I know ceiling mounts are more flexible than just placing the PJ in a rack.

Hi guys, ok thanks so much for the help. Doc Mel, meron zoom, Pero looks like nga I have to buy pa a shelf and just move the pj downwards.  I will also look into the ceiling mounts.

[ninjababez®]

Bro moks have a pro install it.  Medyo mahirap i center yan using mounts kasi the lense is on the side

[nerveblocker]

Does your PJ screen have black borders? This will cover for small projected image overshoots from the screen aside from having an improved contrast. What's your source pala?

[nerveblocker]

Bro moks have a pro install it.  Medyo mahirap i center yan using mounts kasi the lense is on the side

Kung OC kelangan talaga professional.  Akin carpentero lang and ceiling mount. But...my PJ has lens shift kaya mas madali.

[Moks007]

Bro moks have a pro install it.  Medyo mahirap i center yan using mounts kasi the lense is on the side

Kung OC kelangan talaga professional.  Akin carpentero lang and ceiling mount. But...my PJ has lens shift kaya mas madali.

Ok, will see if I will do the mount. Yes meron Ako carpenter hehe. Btw, Sino pro na puede pa install? Kahiya Kasi setup ko hehe.

Does your PJ screen have black borders? This will cover for small projected image overshoots from the screen aside from having an improved contrast. What's your source pala?

Yes my screen have black borders. Source will be blurays and mkvs. Pioneer bdp 450 and mede8er 500

[nerveblocker]

Ok, will see if I will do the mount. Yes meron Ako carpenter hehe. Btw, Sino pro na puede pa install? Kahiya Kasi setup ko hehe.

Try mo contact si Anthony aka diymaster of A-audio. Marami na yang nainstall na PJ setup.

[praktikal]

^ doc, ok talaga ang lens shift for pj. less hassle sa install/adjustment.

[Moks007]

Try mo contact si Anthony aka diymaster of A-audio. Marami na yang nainstall na PJ setup.

Ok thanks so much doc, i will try the shelf setup muna and see what happens kasi na drill na yun wall ko hehe. I didnt know about the lens shift. Ok pala feature nun if your pj have it.

[AlvinladeN]

my kuripot way of ceiling mounting my projector hehe



lcd wall mount, wood and screws. meron akong commercial na ceiling mount kaya lang mahaba at tumatama sa ulo ko.

[praktikal]

my kuripot way of ceiling mounting my projector hehe



lcd wall mount, wood and screws. meron akong commercial na ceiling mount kaya lang mahaba at tumatama sa ulo ko.

oks lang yan 'Vin, di mo naman tititigan yan habang nanunuod at ang importante matibay at walang galaw. spray paint mo lang o balutin ng fabric o vinyl yan oks na. ayosh!

[AlvinladeN]

^yep, may 3 months na nakaganyan ang projector ko hindi naman natitinag.

aYOSH naman sa akin hehe

[DTNS]

@AlvinladeN

ayos!