taking my sweet time...output offset adjustments confirmed working,
output bias set to about 50mA per collector...
i set the 2k bias pot to 1k and i was at the target current, no further adjustment needed,
whe you maximise to 2k, the output stage is deep in cut-off at power up and power meter
reads12 watts, now my power meter reads 17 watts, meaning the output stage are
now dissipating an additional of 5 watts, things are cool to touch after a few hours...
after two hours meter reads 16 watts for just 1 watt per output trannie,
and the good news is, bias is not increasing....