Author Topic: MarkAudio Extended Full Range drivers - Post your build here (Read 287602 times)

JoeyGS · « **Reply #300 on:** Feb 09, 2014 at 10:27 PM »

Mix and match naman yan in the end.....

Quote from: JojoD818 on Feb 09, 2014 at 09:52 PM

walang kaligaw-ligaw ang left and right diyan, isang champagne at isang set na silver.

JojoD818 · « **Reply #301 on:** Feb 09, 2014 at 10:46 PM »

Quote from: JoeyGS on Feb 09, 2014 at 10:27 PM

Mix and match naman yan in the end.....

I'm glad the drivers already arrived. Overnight burn in na yan...

JoeyGS · « **Reply #302 on:** Feb 10, 2014 at 12:52 AM »

Nagumpisa na ang burn-in.......after 100hrs, will play in stereo mode and fine tune with stuffing.....

Quote from: JojoD818 on Feb 09, 2014 at 10:46 PM

I'm glad the drivers already arrived. Overnight burn in na yan...

remington · « **Reply #303 on:** Feb 13, 2014 at 11:44 AM »

after 110 hours of patience I may say that these little drivers do perform well in any music material I throw at it. Still not in its proper box but the music is there, the highs the mids and... the lows that really amazes me because at its size no one will really believe it can give that amount of bass til' you hear. Its not perfect but it is good! Although one thing I notice is it should be placed properly to hear its full potential. Overall it is really a bang for the buck drivers and will give your moneys worth! And I'm sure it will continue to improve overtime...

just my personal impression though

JoeyGS · « **Reply #304 on:** Feb 13, 2014 at 03:25 PM »

It's the same impression I am getting and hopefully will be ale to correctly tune in order to optimize the performance of these drivers.

In the following link, Mark Fenlon explains the characteristics and performance of Mark Audio drivers:

http://www.diyaudio.com/forums/markaudio/244420-operation-info-flattening-markaudio-driver-response.html

Also, following is a link to the story of the chr70 gen.3 and it's a nice read:

http://www.diyaudio.com/forums/markaudio/184372-chr-70-generation-3-coming-soon.html

remington · « **Reply #305 on:** Feb 14, 2014 at 09:00 AM »

MALIGAYANG ARAW NG MGA PUSOD SA LAHAT

fredreadrick · « **Reply #306 on:** Feb 14, 2014 at 01:39 PM »

Ganun din s U sir.
Masaya ang araw na 'to, bukas nasa akin na rin... MA :

Thanks bro Chorus.

remington · « **Reply #307 on:** Feb 14, 2014 at 01:59 PM »

Quote from: fredreadrick on Feb 14, 2014 at 01:39 PM

Ganun din s U sir.
Masaya ang araw na 'to, bukas nasa akin na rin... MA :
Thanks bro Chorus.

ayos sir magugulat ka sa SQ nyan kailangan lang ng slow burning at proper placement

deist · « **Reply #308 on:** Feb 14, 2014 at 06:52 PM »

hahaha sana nga mahilig sa audio, the other day I saw sketches in a piece of paper inside his room, looks like speaker enclosure designs, may graphics pa yung baffle!

Quote from: Gino on Feb 09, 2014 at 10:44 AM

Passing of the torch...almost. Bonding is great.

Same, same sir...it's time to play some of those cool jazz albums for the missus

Quote from: remington on Feb 14, 2014 at 09:00 AM

MALIGAYANG ARAW NG MGA PUSOD SA LAHAT

If your situation will permit sir, go for pensil enclosures (katulad kay JoeyGs), ganda ng imaging & soundstage with these simple to build boxes

Quote from: remington on Feb 14, 2014 at 01:59 PM

ayos sir magugulat ka sa SQ nyan kailangan lang ng slow burning at proper placement

remington · « **Reply #309 on:** Feb 14, 2014 at 07:41 PM »

already planning to build the proper enclosure for these drivers after I heard their potentials...

snobol68 · « **Reply #310 on:** Feb 15, 2014 at 12:12 AM »

kung sakali, makikisabay sana ako 1pair

fredreadrick · « **Reply #311 on:** Feb 15, 2014 at 06:57 AM »

Quote from: snobol68 on Feb 15, 2014 at 12:12 AM

kung sakali, makikisabay sana ako 1pair

wala pa bang nagpa-plano mag import nito.... maraming interesado eh.

fredreadrick · « **Reply #312 on:** Feb 15, 2014 at 09:42 PM »

8.45pm - burn in starts....

JoeyGS · « **Reply #313 on:** Feb 16, 2014 at 09:12 AM »

Nice.....

JoeyGS · « **Reply #314 on:** Feb 16, 2014 at 11:41 AM »

86 hours on the second channel ....... Nakakainip

JojoD818 · « **Reply #315 on:** Feb 16, 2014 at 12:28 PM »

nag off ka pa ba? dapat magdamagan na yan... 4 days lang 96 hours agad...

timber715 · « **Reply #316 on:** Feb 16, 2014 at 02:56 PM »

Quote from: JojoD818 on Feb 16, 2014 at 12:28 PM

nag off ka pa ba? dapat magdamagan na yan... 4 days lang 96 hours agad...

Nag off naman yata sya brader.... Day off! Hehehehe

JojoD818 · « **Reply #317 on:** Feb 16, 2014 at 03:00 PM »

Quote from: timber715 on Feb 16, 2014 at 02:56 PM

Nag off naman yata sya brader.... Day off! Hehehehe

Nag day off na kasi di maiwanan ang gears brader... ang tagal ng finishing naiinip na ako hehehe...

JoeyGS · « **Reply #318 on:** Feb 16, 2014 at 04:20 PM »

Hopefully tapos ang breakin and tuning until next week....

remington · « **Reply #319 on:** Feb 16, 2014 at 10:35 PM »

as per the suggestions of those who already heard my MA, no need for another box as this already sounds good!

xbase · « **Reply #320 on:** Feb 17, 2014 at 12:22 AM »

Quote from: remington on Feb 16, 2014 at 10:35 PM

as per the suggestions of those who already heard my MA, no need to make another box as this already sound good!

Ang bilis ah... hehehe...

remington · « **Reply #321 on:** Feb 17, 2014 at 08:24 AM »

pinaspasan bro para ma set-up na properly he he...

kimmy_kimmy · « **Reply #322 on:** Feb 17, 2014 at 10:39 AM »

congrats sir

remington · « **Reply #323 on:** Feb 17, 2014 at 11:53 AM »

thanks sir

deist · « **Reply #324 on:** Feb 17, 2014 at 01:00 PM »

Congrats sir! what speaker enclosure is this?

Quote from: remington on Feb 16, 2014 at 10:35 PM

as per the suggestions of those who already heard my MA, no need for another box as this already sounds good!

remington · « **Reply #325 on:** Feb 17, 2014 at 01:28 PM »

cloned sonus faber venere 1.5 modified to fit the mark audio sir.

Gino · « **Reply #326 on:** Feb 17, 2014 at 02:07 PM »

Kaya pala na-confuse ako sa pics. 1st pic, sa left side edge to edge ang black front panel. Tapos sa 2nd pic may half inch veneer board left and ride side. Curved pala ang sides ha ha. Naalala ko na ang Sonus Faber mo.

remington · « **Reply #327 on:** Feb 17, 2014 at 02:34 PM »

yes sir ito yung dating 3way, ok din naman ang naging outcome ng SQ naka tipid pa ko he he.

RXV · « **Reply #328 on:** Feb 17, 2014 at 10:26 PM »

Quote from: remington on Feb 17, 2014 at 02:34 PM

yes sir ito yung dating 3way, ok din naman ang naging outcome ng SQ naka tipid pa ko he he.

Grabe sir, kung ano ano na pinag-eexperimentahan mo. Daming pera hahahaha. Next time habol ako sa'yo hehe

remington · « **Reply #329 on:** Feb 17, 2014 at 10:39 PM »

Quote from: RXV on Feb 17, 2014 at 10:26 PM

Grabe sir, kung ano ano na pinag-eexperimentahan mo. Daming pera hahahaha. Next time habol ako sa'yo hehe

tipid nga bro kasi recycled yung box pero good outcome naman.