Author Topic: Speaker DIY'ers (Read 308519 times)

hattori_hanzo · « **Reply #390 on:** Jun 16, 2006 at 09:28 PM »

Quote from: darrel on Jun 16, 2006 at 09:17 PM

retailed in 1995 500 usd ngaion meron ngbebenta nito 1500 usd each pa. parang ginto.

ang mahal ano? ang sarap sana gayahin ng design

mixx · « **Reply #391 on:** Jun 17, 2006 at 02:17 AM »

mga sir try nyo po itong site na ito www.speakerplans.com

darrel · « **Reply #392 on:** Jun 17, 2006 at 05:03 PM »

sir hans kaya natin gayahin un pero kalangan natin ng powers ni sir jojod for the electronics. pero kung nagtitpid tau eto esimate ko.

4 midrange 430x4=1720
2 tweeters 200x2=400
1 sub 2200x1=2200
2 dividing network 275x2=550
1 LPF 240x1=240
1 mdf 950x2=1900
bindingpost 50x1=50
wires etc. 100x1=100
screws 200x1=200
total 7360

e2 link for specs.
http://ecoustics.audioreview.com/cat/audioreview/speakers/floorstanding-speakers/definitive-technology/PRD_120912_1594crx.aspx

http://www.definitivetech.com/loudspeakers/powertower/bp2000.html

http://cplist.citypages.com/adimgs/c9a70a64fa8becd25ff7d1c412f71b90BP2000%20Front.jpg

sir mixx

panay pang PA ung plans dun eh but thanx for the link i'm looking for that site for some time kc i'm planning to build new sub enclosure pero bili muna ko bass shaker.

hattori_hanzo · « **Reply #393 on:** Jun 17, 2006 at 05:12 PM »

Quote from: darrel on Jun 17, 2006 at 05:03 PM

sir hans kaya natin gayahin un pero kalangan natin ng powers ni sir jojod for the electronics. pero kung nagtitpid tau eto esimate ko.

4 midrange 430x4=1720
2 tweeters 200x2=400
1 sub 2200x1=2200
2 dividing network 275x2=550
1 LPF 240x1=240
1 mdf 950x2=1900
bindingpost 50x1=50
wires etc. 100x1=100
screws 200x1=200
total 7360

e2 link for specs.
http://ecoustics.audioreview.com/cat/audioreview/speakers/floorstanding-speakers/definitive-technology/PRD_120912_1594crx.aspx

http://www.definitivetech.com/loudspeakers/powertower/bp2000.html

http://cplist.citypages.com/adimgs/c9a70a64fa8becd25ff7d1c412f71b90BP2000%20Front.jpg

sir mixx

panay pang PA ung plans dun eh but thanx for the link i'm looking for that site for some time kc i'm planning to build new sub enclosure pero bili muna ko bass shaker.

sir darrel,

more or less aabutin pala ng mga 15k. wala pang center ang surrounds, but still good compare sa orig price ng def tech hehehe! mapag ipunan nga...

btw nabili ko na yung JBL GTO 1502, ready for intallation na lang, will have pics as soon as installed na...

Brian_mico · « **Reply #394 on:** Jun 19, 2006 at 10:15 AM »

congrats hans.. sana makita at madinig ka yan ng personal

Brian_mico · « **Reply #395 on:** Jun 19, 2006 at 10:16 AM »

Quote from: Brian_mico on Jun 19, 2006 at 10:15 AM

congrats hans.. sana makita at madinig ka yan ng personal

oppps correction ..
congrats hans.. sana makita at madinig ko yan ng personal

JojoD818 · « **Reply #396 on:** Jun 20, 2006 at 12:22 PM »

Quote from: hattori_hanzo on Jun 17, 2006 at 05:12 PM

btw nabili ko na yung JBL GTO 1502, ready for intallation na lang, will have pics as soon as installed na...

aba dapat kinakabit na yan at ng nadidinig na.

tapos review ha....

hattori_hanzo · « **Reply #397 on:** Jun 20, 2006 at 12:52 PM »

Quote from: JojoD818 on Jun 20, 2006 at 12:22 PM

aba dapat kinakabit na yan at ng nadidinig na.

tapos review ha....

malapit na sir jojod, ill be posting the pics soon. ang bigat pala nito...

JojoD818 · « **Reply #398 on:** Jun 20, 2006 at 04:09 PM »

ANG TAGAL NAMAN!

kung akin yan hindi na yan aabutin ng alikabok nakakabit na yan.

Brian_mico · « **Reply #399 on:** Jun 21, 2006 at 05:32 PM »

OO NGA ang TAGALLLLLLLL ...

hattori_hanzo · « **Reply #400 on:** Jun 21, 2006 at 07:59 PM »

darn! hindi fit yung JBL sa mounting, ipapamodify ko pa yung box...

JojoD818 · « **Reply #401 on:** Jun 21, 2006 at 10:28 PM »

Quote from: hattori_hanzo on Jun 21, 2006 at 07:59 PM

darn! hindi fit yung JBL sa mounting, ipapamodify ko pa yung box...

yun JBL ang dalhin mo sa machine shop para mabawasan

ANG TAGAL TALAGA!

hattori_hanzo · « **Reply #402 on:** Jun 22, 2006 at 12:18 AM »

Quote from: JojoD818 on Jun 21, 2006 at 10:28 PM

yun JBL ang dalhin mo sa machine shop para mabawasan

ANG TAGAL TALAGA!

dagdag gastos hay! magkano naman kaya singil ng craftsman nito, malaki pala yung frame ng JBL makapal unlike sa DTX stamped metal lang, etong JBL alloy yata to eh, ang laki pa ng magnet...

Toquero · « **Reply #403 on:** Jun 22, 2006 at 07:06 AM »

Quote from: hattori_hanzo on Jun 22, 2006 at 12:18 AM

dagdag gastos hay! magkano naman kaya singil ng craftsman nito, malaki pala yung frame ng JBL makapal unlike sa DTX stamped metal lang, etong JBL alloy yata to eh, ang laki pa ng magnet...

Hindi ba kaya ng wood file ?

... yung sa dynaquest ko kasi ,yung 3 edges lang ang masikip nakuha ko lang sa wood file

hattori_hanzo · « **Reply #404 on:** Jun 22, 2006 at 09:20 AM »

Quote from: Toquero on Jun 22, 2006 at 07:06 AM

Hindi ba kaya ng wood file ? ... yung sa dynaquest ko kasi ,yung 3 edges lang ang masikip nakuha ko lang sa wood file

wala kasi akong wood file saka baka masira ko yung asthetics nung box (vinyl cover), papagawa ko nalang sa expert craftsman, yung sa mounting ng DTX pag tnry ko i fit lahat masikip. eh hindi ko alam kung ano ang babawasan. baka pag ako gumawa hindi ko ma center... $:-\$

Handyman · « **Reply #405 on:** Jun 22, 2006 at 09:01 PM »

Quote from: hattori_hanzo on Jun 22, 2006 at 09:20 AM

wala kasi akong wood file saka baka masira ko yung asthetics nung box (vinyl cover), papagawa ko nalang sa expert craftsman, yung sa mounting ng DTX pag tnry ko i fit lahat masikip. eh hindi ko alam kung ano ang babawasan. baka pag ako gumawa hindi ko ma center... $:-\$

sir, baka makatulong...

yung box ang bawasan mo, kaya ng wood rasp yan (wood file)....mark mo muna yung dapat mong bawasan, tanggalin mo muna yung vinyl na dapat tanggalin using blade cutter para malinis. tapos i-file mo na..mas mabilis kung wood rasp ang gagamitin mo.

hattori_hanzo · « **Reply #406 on:** Jun 22, 2006 at 09:44 PM »

Quote from: Handyman on Jun 22, 2006 at 09:01 PM

sir, baka makatulong...

yung box ang bawasan mo, kaya ng wood rasp yan (wood file)....mark mo muna yung dapat mong bawasan, tanggalin mo muna yung vinyl na dapat tanggalin using blade cutter para malinis. tapos i-file mo na..mas mabilis kung wood rasp ang gagamitin mo.

thanks sir handyman, pinagawa ko nalang sa craftsman, baka masira ko pa eh. right now nasa kanila na yung box. by next week makukuha ko na daw. sana okey ang lahat....

aHobbit · « **Reply #407 on:** Jun 23, 2006 at 10:31 AM »

Quote from: hattori_hanzo on Jun 22, 2006 at 09:20 AM

wala kasi akong wood file saka baka masira ko yung asthetics nung box (vinyl cover), papagawa ko nalang sa expert craftsman, yung sa mounting ng DTX pag tnry ko i fit lahat masikip. eh hindi ko alam kung ano ang babawasan. baka pag ako gumawa hindi ko ma center... $:-\$

may metal file ka?

kikilin mo na lang yung JBL para magkasya, tago naman siya, di tulad ng box

JojoD818 · « **Reply #408 on:** Jun 23, 2006 at 10:40 AM »

Quote from: aHobbit on Jun 23, 2006 at 10:31 AM

may metal file ka?

kikilin mo na lang yung JBL para magkasya, tago naman siya, di tulad ng box

My thoughts exactly!

Joke lang Hans - ANG TAGAL TALAGA!

hattori_hanzo · « **Reply #409 on:** Jun 23, 2006 at 01:11 PM »

HEH!

.... hehehe!

tapos pumalpak ano? yari ang DTX sub ko

Brian_mico · « **Reply #410 on:** Jun 23, 2006 at 04:17 PM »

si hans, pag natapos mo yan baka pwede sched natin kung kailan pwede namin madinig yan ng personal

hattori_hanzo · « **Reply #411 on:** Jun 23, 2006 at 04:53 PM »

Quote from: Brian_mico on Jun 23, 2006 at 04:17 PM

si hans, pag natapos mo yan baka pwede sched natin kung kailan pwede namin madinig yan ng personal

shure bro...

Brian_mico · « **Reply #412 on:** Jun 27, 2006 at 06:43 PM »

bro, ano balita.. ok na ba sub mo?

hattori_hanzo · « **Reply #413 on:** Jun 27, 2006 at 08:47 PM »

Quote from: Brian_mico on Jun 27, 2006 at 06:43 PM

bro, ano balita.. ok na ba sub mo?

ala pa yung box bro hindi ko pa nakikita yung gumagawa...

JojoD818 · « **Reply #414 on:** Jun 27, 2006 at 10:36 PM »

Quote from: hattori_hanzo on Jun 27, 2006 at 08:47 PM

ala pa yung box bro hindi ko pa nakikita yung gumagawa...

baka tinangay na!

siguro pag dating niyan eh hataw agad ang aabutin ng sub mo.

darrel · « **Reply #415 on:** Jul 19, 2006 at 10:59 AM »

anu balita sa sub ni sir hans.

juneaki · « **Reply #416 on:** Aug 24, 2006 at 09:31 AM »

Sir, natagpuan na ba yung gumagawa ng subwoofer box ni sir hans? Naipa-blotter na ba?

Kumusta na kaya ang sub ni sir hans? Any new news?

hattori_hanzo · « **Reply #417 on:** Aug 24, 2006 at 09:44 AM »

mga brothers...

oks na yung sub and the performance are great. hindi ko lang ma update yung photos wala kasi yung digcam eh. i have discussed its performance sa DTX thead...

PS: kung may budget na kayo, advise ko lang go ahead with the tweaked DTX to JBL. ang ganda talga bukod sa asthetics improved talaga ang performance can be compared dun sa mga branded ones, tama sila boss JojoD at sir toquero maganda ang electrical properties nung JBL GTO compared dun sa DTX stock driver na compromised na dahil sa cost nung sub, kala ko nung una sablay pero nung na adjust ko na yung setting ayos! pag explosions talga explosions yung 15" parang may shockwave pa pag nag lalaro na yung cone... maraming salamat...

alexg · « **Reply #418 on:** Aug 27, 2006 at 11:38 PM »

I just started building a pair of small tower sealed bipole using the 4" Fostex FE127E.

The design was based on this: http://ca.geocities.com/gmilitano/Speakers/FE127E_SB/FE127E_SB.htm

The baffles would be 3/4" MDF that will be painted black, the sides of the speakers would be solid narra.

Here are narra slabs being planed (left over from our kitchen cabinets):

Here are the MDF baffles:

Here are the baffles glued and screwed to the braces:

The four Fostex FE127E will arrive on Thursday, I will post more pictures.

These speakers will be driven by two modified t-amps (bi-amped) and a tube pre-amp, creations of Master JojoD.

aHobbit · « **Reply #419 on:** Aug 28, 2006 at 06:06 PM »

Quote from: alexg on Aug 27, 2006 at 11:38 PM

I just started building a pair of small tower sealed bipole using the 4" Fostex FE127E.

The design was based on this: http://ca.geocities.com/gmilitano/Speakers/FE127E_SB/FE127E_SB.htm

The baffles would be 3/4" MDF that will be painted black, the sides of the speakers would be solid narra.

Here are narra slabs being planed (left over from our kitchen cabinets):

Here are the MDF baffles:

Here are the baffles glued and screwed to the braces:

The four Fostex FE127E will arrive on Thursday, I will post more pictures.

These speakers will be driven by two modified t-amps (bi-amped) and a tube pre-amp, creations of Master JojoD.

I cant see the pix, its typically firewall blocked on our setup. Is this the same reference full range project variation by dave (planet10) of diyaudio? I am considering the monopole because of footprint.