LEISURE 2SEThe Leisure 2 SE is our most compact speaker. It has made an outstanding achievement since put into market two years ago, and got favorable comments from audio fans at home and abroad.
Leisure 2 SE is a 2-way, 2-unit rear-port bookshelf speaker whose tweeter adopts world-famous AURUM CANTUS aluminum ribbon driver-G2, and woofer adopts AURUM CANTUS AC-130 MK2 5.2" driver. Through development for many years, G2 tweeter and AC-130 MK2 woofer have been mature on the technology, and successfully used in many models of AURUM CANTUS.
The design of Leisure 2 SE cabinet is noble and elegant. Mounted precious rosewood on both sides, the cabinet whose main hue is black fully expresses the connotation of "luxury". Besides a balanced visual sense, the pyramidal mold-making of cabinet can better eliminate the bad resonance and standing wave caused by the operation of woofer. The slightly back-inclined front baffle not only makes this compact speaker brilliant and outstanding, but the most important is to get ideal linear phase.
Leisure 2 SE is easy to drive and can be well matched with mid-cost amplifiers from lots of companies. Maybe most people find it hard to believe that such a small speaker can make such a big sound with deep, rich bass and startling dynamics. But as long as you listen to it, you surely will be convinced by its perfect performance and enchanting charm. Its sound offers a combination of nature, authenticity, detail, timbre, imaging and deep bass and punch.
The extraordinary performance of Leisure 2 SE is made possible by special hand-built drivers, cabinet and ear-tuned crossover network, which expresses the long and rich experience of AURUM CANTUS in Hi-Fi speaker systems again.
SPECIFICATIONS:Description: 2-way, 2-units
Frequency Range: 55Hz—40kHz
Dispersion: horizontal off-axis 30°,–3dB.
Sensitivity: 87dB/W/m
Impedance: 8ohms (minimum 6.4ohms)
Power Requirement: 50—150W recommended.
Tweeter: aluminum ribbon(the ribbon size:L70×W8.5×T0.01mm),high power handling, high output, easily field-replaceable, shielded design.
Midwoofer: 5.2", 130mm, NON-WOVEN CARBON FIBER + KEVLAR CONE, Φ25mm copper cover aluminum voice coil with flat wire, Φ100×20mm magnet, long throw.
Crossover Frequency: 2500Hz
Crossover’s attenuation slope: woofer –12dB, tweeter –18dB.
Crossover parts: high-quality polypropylene capacitor, 5N copper wire inductor, metal oxide film resistor and ceramic resistor.
Connective wire: 5N copper wire
Absorbing materials: special polyester fibres
Connections: 2 pcs gold-plated binding posts
Dimensions(HWD):360×236×280mm
Cabinet material: MDF
Finish: rosewood veneer+PE gloss paint (piano paint), furthermore, also stock poplar burl, black walnut, French sycamore, reflective maple and cherrywood options.
Net weight: 10.5Kg/pc (regard actual weight as standard)