mga sir.. patanung lang
pwede bang bi-amp yung 9.1? ??
Kase nabasa ko lang to mga sir..
Bi-amping - what it means
If you want to take things a stage further, bi-amping causes an even more significant improvement to the sound. Any speaker that can be bi-wired can also be bi-amped, but in this case it involves using one whole channel of amplification to drive each individual driver. So, in this configuration, you have a system with four channels of amplification - ie two stereo amplifiers - with each speaker having its tweeter driven by one channel, and its mid/bass driver by another.
takot ako baka masira speakers...
try ko sana yung bi-amping features ng onkyo 506
nakalagay kase sa manual pwede bi-amp yung front speakers using the
SURR BACK speakers terminals..
.. tnx
Hindi naman masisira yung speakers kasi bi-amp/bi-wire capable naman ang provided na terminals ng 9.1. Ang mabigat na tanong lang e kung malaki nga ba ang improvement ng bi-amping.
Ang sagot ay may malaking improvement kung true bi-amping. Kung hindi, parang bi-wiring lang ang effect.
1. Passive Crossover:Kung dalawa ang amp, pero amplified signal ang dumarating sa crossover, ang tawag diyan ay passive crossover. Sayang lang ang power ng dobleng amp, kasi yung power para sa high and mid ay binawasan na ng crossover bago dumating sa high and mid speakers, at yung power para sa bass ay binawasan din ng crossover bago dumating sa bass speaker/s.
Ang epekto, may bawas na ang power ng dalawang amp bago dumating sa speakers.
2. Active Crossover -- True Bi-Amping:Kung dalawa ang amp, pero ang line signal ay dumadaan sa external crossover bago dumating sa amp, ang tawag diyan ay active crossover.
Yan ang true bi-amping, kasi yung filter ay nasa line-level signal. Walang filter sa amplified signal. Kaya walang bawas ang power na pupunta sa high and mid speakers, at wala ring bawas ang power na pupunta sa bass speakers.
Eto ang tamang connection:
Ang problema mo ngayon, paano kang makakatiyak kung tama ba ang design at kung matching ba sa system mo ang external crossover na ikakabit mo? Alam mo ang sensitivity rating ng 9.1, pero ano ang sensitivity ng bawa't isang driver sa loob? Kailangan mo ba ng equipment para masukat ang mga frequencies? Tatanggalin mo ba ang internal crossover ng 9.1 para maiwasan ang double filtering?
Sakit lang ng ulo ang mga bi-amping na yan. Ang advice ko, basta ikonekta mo na lang nang normal ang amp sa speaker, hindi ka pa tatanda nang maaga.
===================================
Bi-Amping: Pleasure or Pain?
http://www.gcaudio.com/resources/howtos/biamping.html