0 Members and 5 Guests are viewing this topic.
Parang ganito master.......Either way master oks yan! bili ng dalawa kung gusto pang audio, bili ng lima kung pang HT. Kung gusto mag 7.1 bili ulit ng dalawa at kung 9.1 naman bili ulit ng dalawa. Kung 11.1 bili nalang ulit. Very versatile ika nga
From NMT ikabit mo lang optical cable to AVR. Tapos from NMT again, ikabit CDR-King P250 HDMI cable straight to lcd or plasma tv - ayos na!
Wala ata pre-outs etong Sony - so malamang kailangan mo nga ng may preouts para masubukan mo yung monoblocks mo Eto nakita ko sa net regarding yung Sony:http://urun.gittigidiyor.com/Sony-5-1-Amfi-STR-DE545-DTS-DOLBY-DIGITAL_W0QQidZZ30476967
Teka, matanong ko lang.........pwede mo ba magawan ng external preouts ang isang amp/avr na wala?
pa-order nga ng 1 amp casing para kay muning ko!
Brader - dami na kasi nagsasabi at nakapag-testing that the power ratings listed by avr manufacturers are a bit bloated. Yung 100watts nila eh parang 35-50watts lang Kung kaya 100watts of clean & pure power, I think it would be a good compromise between average and power users. alam mo naman sa hobby natin - there is no such thing as having too much power! May volume control naman eh Its easy to say that any amp could fill a living room with sound - but what kind of sound?Iba din pag may headroom ka and your amps would be appreciated by those using less efficient speakers or those who prefer 4ohm load speakers.
Tapos pa THX certified mo
Pwede pwede... Kahit yun mga HTiB pwede din sir... ang tanong is: Is it worth doing? Meron naman nabibili na AVR na meron na agad...
Eto kasi si Kagawad dati ang sabi dapat 100W ang minimum. Result ng research ko kagabi kailangan daw amp pang HT should produce clean sound, maganda transient response,clean sound , low distortion at rated power, tapos clean sound ulit
Oh, definitely so brader! AVRs with pre-outs starts in the mid to high end models - ang mga entry level AVRs eh halos walang pre-outs. If you can really do it then I think this will open a huge market to expand your new poweramp project. Pipila sa iyo yung mga may entry level ng AVRs para lagyan mo ng pre-outs (kahit may additional external casing cguro) tapos kukuha din sila sa iyo ng poweramps! win-win scenario master! Better yet cguro - kung plano nila mag poweramps at magpapagawa sila sa iyo ng pre-outs - baka pwede mo na alisin or patayin yung amp section ng avr nila para ala-processor nalang silbi ng avr.You do get better sonics sa processing pag walang amp power - tama ba?
Bakit puros clean sound?
pano kaya ako matatapos nito ang sarap ng tulog sa casing ng amp tsk tsk tsk...
May punto ka Brader, this will truly open new avenues for our HT users. Sulit talaga ang pagpunta ko nun Saturday, or was it really intended to be? Imagine na-cancel yun isang very important meeting ko diba? No, wag natin alisin para flexible pa din yun AVR, the built-in amps will only consume idle power when not driving any load naman.
Yikes!!! Siguradong hindi magiinit ang amp na yan eh comfortable na comfortable ang kuting. Surely maganda patutunguhan ng amp na ito.
So Jojo...since video is not the issue then HDMI is not a priority. I can see that you want to experience the HT sound so then the amps and the processors are your main concern. At least your problem is only 50% because 50% of the HT system is also the video quality. Tamang tama yan....puwedeng hinay hinay lang.Gawa ka muna ng 2 stereo and 2 mono amp for a 5.1 setup. Then maybe you can design the stereo amp to be brindgeable para maging mono. So you can add amps later na lang. Gainclone will be your best bet for clean sound.
Nagtataka nga din ako sir, almost lahat ng google ko about HT amps stressed kailangan clean sounding amp. This probably relates to transparency...
Actually, if you are thinking of doing monoblock power amps for HT purposes, I would say that these are useful mainly for the 3 main speakers - LCR. More or less even ang requirements nila kasi most of the dialogue goes through the center channel but the LR channels get a lot of effects. For the rest of the speakers, there is much less power requirement at di rin sila sabay2 na nangangailangan ng power. Therefore, it's not really efficient to use monoblocks for the other speakers. Kung 7-channel ang HT mo, pwedeng 4-channel amp na lang for the rest of the speakers, sharing a common power supply or even, as you suggest, use the internal power amp of the AVR.
Para walang buhay pag puros clean sound dba.
That's very true Sir Mark, my plan is to build a tri-mono amp or 3 monoblocks for the LCR channels and let the receiver power up the surrounds, maximizing each amp's use.The problem I face with the tri-mono is that it may not be applicable for audio because of the extra Center channel, while if I build monoblocks, anybody can just use 2 for audio or 3 for HT (LCR) applications.I believe that all of my worries would be answered easier if I start building my HT setup. Ikaw naman kasi pinapanood mo pa yun Top Gun sa akin eh...
Ah ok na gets ko na Brader... parang 5.2 ang gagawin mo ano? Naku naku, dami naghahanap ng LS Brader! Unfortunately, puro replacement na lang yun mga optocouplers wala pa ako mahanap na original types...
Likewise brader Cal Kahit wala ako IC or speaker wires mo, ayos lang Oh, kitam - magkasama na tayo nung sabado hindi mo parin alam yung Sony? Tsk Tsk......kaya pala kahit anong paramdam tungkol sa IC at speaker wires, wala parin epek
Sure ka ba talaga na gusto mo madinig ang DIY IC ko? Tawagan nga kita, Brader Mardon!!! heheheheh Panay ang kulam mo ah kay brader JojoD!!!!
When I get my 5-channel Emotiva power amp (so that panay external amps ako) and after doing a little more tweaking of acoustic treatment and calibration, invite ko uli kayo for some multi-channel music (concert) listening.
Hayyy, sa presinto ka nalang magpaliwanag brader
Mas flexible nga ang 3 monoblocks as compared to tri-mono. Top Gun is a typical film for the wow factor cuz it has some of the best panning (left to right, front to back, down to up) but another aspect of HT listening is multi-channel music. Purists will scoff at anything that is not stereo but in truth, there is nothing sacred about using 2-channel audio for music. In a good system, I believe that multi-channel music trumps stereo. It's just more immersive and provides a much bigger sweet spot. When I get my 5-channel Emotiva power amp (so that panay external amps ako) and after doing a little more tweaking of acoustic treatment and calibration, invite ko uli kayo for some multi-channel music (concert) listening.
Master Jo - good point din yun na wag nalang patayin yung power ng avr para mas versatile nga (but willing ako patayin if its for me lang for any sonic benefits )
Master Jo - I would be willing to send to you my xmas prize if you can integrate pre-outs to it
Electronically speaking, I see no sonic benefits Brader kung papatayin yun mga built-in power amps... Brader, looks like I will have to suspend JD Labs operations muna, all current, pending and planned (yun nasagutan ko na) projects are still go though. Gusto ko muna make time for myself este my own projects .Aayusin ko muna mga kailangan ko, uumpisahan ko na sa sub para nakahanda na kahit 2.1 lang muna. May nakakalat pa dito na 12" Targa at 12" Cyclone na pwede na maumpisahan. Then 32" LCD monitor ang next dahil may source (WDTV) na naman ako. Then DIY center and surrounds speakers habang nagaabang ng receiver na may preouts. Tsaka tayo pupunta sa mga hundreds of Watts na monoblock amps hehehe... Yan na at layout ko na plano ko sa aking simpleng HT yehey!
Master Jo - could you possibly speculate (but im sure you already know) on the innards of these Marantz MA-500 mono-blocks?Medyo curious lang ako kung paano nila na-achieve ang 125watts in such a small footprint tapos THX certified pa sila Meron din pala silang 200watts/monoblock - MA-700:http://www.marantz.com/pdfs/u_amp_ma500_bck.pdf
Pero syempre aproob na ako basta "JD Labs" certified!
ayannnnnn naaaaaaaaaa yan ang iniintay ko, my hositng job ba ulit hehehehehecongrats in advance sir mark
ayan na welcome to the club brader jo woooohooooo
