Author Topic: JojoD's Tube and Solid State Projects (Read 1130775 times)

Cjtjader · « **Reply #5220 on:** Feb 20, 2011 at 08:05 AM »

Nice nice nice.....

Quote

It was so lovingly called "JD Labs Point Four" Cheesy

Sweet lover talaga!!!!

JojoD818 · « **Reply #5221 on:** Feb 20, 2011 at 08:06 AM »

Quote from: streetsmart on Feb 20, 2011 at 07:30 AM

Yup, understood. Di ko lang agad naisip na ganito nga dapat ang design ng sub selector ni Mike C. It shouldn't just switch between subs. It should allow you to drive multiple subs at the same time. Galing.

Kasi naman sir Mark, nakakainis yun PAUSE when we audition speakers and subs, nakakalimutan na yun tunog kaya minsan ang hirap pumili.

Kaya naisip ko, dapat pwede sabay para switch lang ok na, di na tatayo to transfer interconnects.

This one is specially designed for auditions to feature one sub or even feature multiple sub arrangements.

I so love going HT, new challenges sir Mark!

Nagawa ko na yata lahat sa Tubes and Solid State for Audio... will try to put them to good use with HT stuff naman

JojoD818 · « **Reply #5222 on:** Feb 20, 2011 at 08:08 AM »

Quote from: cjtjader on Feb 20, 2011 at 08:05 AM

Nice nice nice.....

Sweet lover talaga!!!!

Napasama kasi sa Smooth Operator!

Btw Brader, dumating na pala yun gamit ng TwinG kahapon!

Cjtjader · « **Reply #5223 on:** Feb 20, 2011 at 09:01 AM »

Quote

Napasama kasi sa Smooth Operator! Grin Grin Grin

Naku nagkasisishan pa ngayon!! hahahaha

Quote

Btw Brader, dumating na pala yun gamit ng TwinG kahapon! Wink

Ayos, Brader!! maraming salamat

streetsmart · « **Reply #5224 on:** Feb 20, 2011 at 01:38 PM »

Quote from: JojoD818 on Feb 20, 2011 at 08:06 AM

I so love going HT, new challenges sir Mark! Nagawa ko na yata lahat sa Tubes and Solid State for Audio... will try to put them to good use with HT stuff naman

Ahhh ... Bigyan kita ng challenge. Screen masking system. Tingnan mo ito:

http://www.carada.com/HorizontalMasquerade.aspx

Kausap ko kahapon si Jay2. Sabi nya similar daw sa ginagawa na automated roman shades. Gawin mo at ako unang customer.

JojoD818 · « **Reply #5225 on:** Feb 20, 2011 at 08:00 PM »

Quote from: streetsmart on Feb 20, 2011 at 01:38 PM

Ahhh ... Bigyan kita ng challenge. Screen masking system. Tingnan mo ito:

http://www.carada.com/HorizontalMasquerade.aspx

Kausap ko kahapon si Jay2. Sabi nya similar daw sa ginagawa na automated roman shades. Gawin mo at ako unang customer.

Wow mechanical and electronics projects yan sir Mark!

I'll study first...

joya · « **Reply #5226 on:** Feb 21, 2011 at 12:25 PM »

Quote from: JojoD818 on Feb 19, 2011 at 12:05 PM

Bi-Lateral Speaker Switcher and Subwoofer Signal Switcher

Connection Manuals

All outputs at MUTE

Outputs 1 through 4 ACTIVE, outputs 5 through 8 MUTE

Master, paki-explain naman in simple terms their function, use and connections, or dapat siguro actual demo

JojoD818 · « **Reply #5227 on:** Feb 21, 2011 at 06:08 PM »

Quote from: joya on Feb 21, 2011 at 12:25 PM

Master, paki-explain naman in simple terms their function, use and connections, or dapat siguro actual demo

Brader, pinaka mainam yun actual demo hehehe... sa Graceland yan gagamitin to facilitate comparison and auditioning of SVS speakers and subs...

JojoD818 · « **Reply #5228 on:** Feb 21, 2011 at 06:10 PM »

@Doc Gerry,

I've re-started the DAC project po Doc, sorry for the delay.

Thanks

Jojo

geriboy · « **Reply #5229 on:** Feb 21, 2011 at 06:48 PM »

Quote from: JojoD818 on Feb 21, 2011 at 06:10 PM

@Doc Gerry,

I've re-started the DAC project po Doc, sorry for the delay.

Thanks

Jojo

wow! maraming salamat po sir jojo! can't wait for the final product.

dzanos · « **Reply #5230 on:** Feb 21, 2011 at 07:47 PM »

Uy DAC project, I'm in the market for a DAC pa naman

anchit · « **Reply #5231 on:** Feb 21, 2011 at 07:50 PM »

streetsmart · « **Reply #5232 on:** Feb 21, 2011 at 07:53 PM »

Quote from: JojoD818 on Feb 20, 2011 at 08:00 PM

Wow mechanical and electronics projects yan sir Mark! I'll study first...

It's a very interesting project but a little bit higher end. You must have a projector na. Then, you want to remove the annoying black bars. You can do that with a very expensive anamorphic lens and constant-image-height (CIH) screen or you can use this simple device.

macdon · « **Reply #5233 on:** Feb 21, 2011 at 09:46 PM »

Quote from: streetsmart on Feb 21, 2011 at 07:53 PM

It's a very interesting project but a little bit higher end. You must have a projector na. Then, you want to remove the annoying black bars. You can do that with a very expensive anamorphic lens and constant-image-height (CIH) screen or you can use this simple device.

Mark - master jojod daw will study it first muna ........... he will study what brand of PJ he will get daw

JojoD818 · « **Reply #5234 on:** Feb 21, 2011 at 10:12 PM »

Quote from: geriboy on Feb 21, 2011 at 06:48 PM

wow! maraming salamat po sir jojo! can't wait for the final product.

let's not get ahead of ourselves Doc, first we test, and we re-test, then that's the time we think of the final product.

Quote from: dzanos on Feb 21, 2011 at 07:47 PM

Uy DAC project, I'm in the market for a DAC pa naman

Quote from: anchit on Feb 21, 2011 at 07:50 PM

+1

Sir dzanos and Brader Francis, have a look at the 707 DAC, I think it's worth every cent.

Quote from: streetsmart on Feb 21, 2011 at 07:53 PM

It's a very interesting project but a little bit higher end. You must have a projector na. Then, you want to remove the annoying black bars. You can do that with a very expensive anamorphic lens and constant-image-height (CIH) screen or you can use this simple device.

Naku sir Mark, wala pa sa plano namin ang mag PJ eh... wala din naman kasing paglalagyan at maliit lang ang room...

Quote from: macdon on Feb 21, 2011 at 09:46 PM

Mark - master jojod daw will study it first muna ........... he will study what brand of PJ he will get daw

Kung meron lang malulugaran Brader bakit hindi... pero the way I see it, prerequisite ang new home pag mag PJ route...

streetsmart · « **Reply #5235 on:** Feb 22, 2011 at 05:06 AM »

Quote from: JojoD818 on Feb 21, 2011 at 10:12 PM

Naku sir Mark, wala pa sa plano namin ang mag PJ eh... wala din naman kasing paglalagyan at maliit lang ang room...

Di ko naman ibig sabihin na ikaw mismo ay may pj. Ang clients for the masking system must already have a pj. Nanggugulo lang kasi si macdon.

praktikal · « **Reply #5236 on:** Feb 22, 2011 at 05:16 AM »

husay mo talaga master Jo! pa kiss nga --

bentang benta ito sa mga showrooms.

JojoD818 · « **Reply #5237 on:** Feb 22, 2011 at 05:53 AM »

Quote from: streetsmart on Feb 22, 2011 at 05:06 AM

Di ko naman ibig sabihin na ikaw mismo ay may pj. Ang clients for the masking system must already have a pj. Nanggugulo lang kasi si macdon.

In that case sir Mark ang sarap pag aaralan niyan, parang pneumatic mechanical action yun nakita ko dun sa video.

Magulo talaga yan si Brader Mac hahaha!

JojoD818 · « **Reply #5238 on:** Feb 22, 2011 at 06:01 AM »

Quote from: praktikal on Feb 22, 2011 at 05:16 AM

husay mo talaga master Jo! pa kiss nga --

bentang benta ito sa mga showrooms.

salamat sir! sige na nga --

plapoy · « **Reply #5239 on:** Mar 09, 2011 at 09:15 AM »

Good day sir Jojo,

Newbie po ako sa hobby na ito... ask ko lang po how much yung integrated amp nyo?.. ilang channnel po yung kaya nito? saka capable po ba sya for bi-amping?. I'm using polk audio RTi A3.. Sorry po no time to backread you're 175 pages of success

thanks and more power to you and your products.

JojoD818 · « **Reply #5240 on:** Mar 09, 2011 at 11:44 AM »

Quote from: plapoy on Mar 09, 2011 at 09:15 AM

Good day sir Jojo,

Newbie po ako sa hobby na ito... ask ko lang po how much yung integrated amp nyo?.. ilang channnel po yung kaya nito? saka capable po ba sya for bi-amping?. I'm using polk audio RTi A3.. Sorry po no time to backread you're 175 pages of success thanks and more power to you and your products.

Good day din po sir,

2-channel amps lang po sir pero I can make you as many amps (for bi-amping) as you need. Honestly, I have no experience with the RTi A3, aralin ko sir once I have spare time so I can make an intelligent recommendation.

Will get back to you soon, medyo (actually, sobrang) baon lang po sa project lately.

Cheers!

plapoy · « **Reply #5241 on:** Mar 10, 2011 at 01:00 PM »

Salamat sa reply sir Jojo..

mukhang madaming projects po yan ah. hehe.. good luck po..

JojoD818 · « **Reply #5242 on:** Mar 10, 2011 at 07:40 PM »

Quote from: plapoy on Mar 10, 2011 at 01:00 PM

Salamat sa reply sir Jojo.. mukhang madaming projects po yan ah. hehe.. good luck po..

Anytime po sir, sensiya na need to clear up lang kaunti yun pila... don't worry aabot din po sa inyo sir.

Thanks!

JojoD818 · « **Reply #5243 on:** Mar 10, 2011 at 07:41 PM »

Twin G monos and Baby G int amps packed and ready

audiojunkie · « **Reply #5244 on:** Mar 10, 2011 at 10:29 PM »

Ganda Master!

ano specs ng amp?..

medyo curious lang kung pwede... palitan ibang color ang original LED light ng amp? Thnx!

JojoD818 · « **Reply #5245 on:** Mar 11, 2011 at 07:04 AM »

Quote from: audiojunkie on Mar 10, 2011 at 10:29 PM

Ganda Master! ano specs ng amp?..

medyo curious lang kung pwede... palitan ibang color ang original LED light ng amp? Thnx!

Thanks Brader AJ! TwinG 60W/ch monoblock... BabyG 50W/ch...

Mostly orange color na ang gamit Brader but as per request pwede palitan as long as the color exist...

audiojunkie · « **Reply #5246 on:** Mar 11, 2011 at 11:22 AM »

Quote from: JojoD818 on Mar 11, 2011 at 07:04 AM

Thanks Brader AJ! TwinG 60W/ch monoblock... BabyG 50W/ch...

Mostly orange color na ang gamit Brader but as per request pwede palitan as long as the color exist...

Thanks !