Author Topic: JojoD's Tube and Solid State Projects (Read 1130744 times)

Sure sure sure... source impedance stays the same (relatively) down to 12 ohms.

But the real kicker here is the noticeable "jump" in performance when using portable amps to drive the 700s and 800s (known for their higher impedance and unruly requirements) and using a dedicated amp. It really takes off.

timber715 · « **Reply #10006 on:** Jul 13, 2014 at 03:54 AM »

Brader, in case I decide to build a cnc router, patulong ha?!

JojoD818 · « **Reply #10007 on:** Jul 14, 2014 at 08:15 AM »

Quote from: timber715 on Jul 13, 2014 at 03:54 AM

Brader, in case I decide to build a cnc router, patulong ha?!

Naman brader, ikaw pa!

Sama mo sa deciding factor ang software at software platform. Pag Linux wala ka problema, latency lang ng hardware and iintindihin mo. Pero pag Windows-based na, alam mo na. Pero mas madami software sa Windows kaysa open source ewan kung bakit...

Gino · « **Reply #10008 on:** Jul 14, 2014 at 11:56 AM »

Hours and hours of fun ang Linux he he.

timber715 · « **Reply #10009 on:** Jul 14, 2014 at 12:47 PM »

Salamat brader.
Already have the plans for a shoestring budget build made mostly of birch plywood, inisip ko it would be my stepping stone to cnc. Plus it would be what I would use to build my second better one. But then again gusto ko rin ilimit yung costing and maybe cry once na lang...
Either I buy a complete one already since mura mga China made or korean ones or build this one... http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
Ok sana linux kung may background na ko, pero this machine has support for windows based ones plus learning linux could add to the already steep learning curve I have to muster....
I want a 4'x8' platform sana, but reading what is online, I might settle with a 3'x4' platform minimum... Basta, bahala na si batman... Balitaan kita kung matutuloy man.

JojoD818 · « **Reply #10010 on:** Jul 15, 2014 at 08:00 PM »

Quote from: Gino on Jul 14, 2014 at 11:56 AM

Hours and hours of fun ang Linux he he.

maganda sa kanya walang hiccups... sinubukan ko windows based maganda very pro ang dating ng gui pero dami missing steps pag hindi dedicated ang pc...

JojoD818 · « **Reply #10011 on:** Jul 15, 2014 at 08:05 PM »

Quote from: timber715 on Jul 14, 2014 at 12:47 PM

Salamat brader.
Already have the plans for a shoestring budget build made mostly of birch plywood, inisip ko it would be my stepping stone to cnc. Plus it would be what I would use to build my second better one. But then again gusto ko rin ilimit yung costing and maybe cry once na lang...
Either I buy a complete one already since mura mga China made or korean ones or build this one... http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
Ok sana linux kung may background na ko, pero this machine has support for windows based ones plus learning linux could add to the already steep learning curve I have to muster....
I want a 4'x8' platform sana, but reading what is online, I might settle with a 3'x4' platform minimum... Basta, bahala na si batman... Balitaan kita kung matutuloy man.

maganda starter yan ox brader pero sa tingin ko pang 4' x 8' ka eh. ang problema lang sa malalaki na cnc yun leadscrew kailangan helix na. pero wala problema yan, meron tayo source ng industrial hardware locally and I'm sure meron ka naman source sa abroad.

as for the software, linux or windows based you still need to learn a little machine language para makausap mo at magkaintindihan kayo ng makina.

madali lang yun promise.

sige check mo muna kung talaga kailangan mo, mahal din yan at baka mapasubo lang, isa pa yun space... di pwede itupi at itago ang cnc

JojoD818 · « **Reply #10012 on:** Jul 22, 2014 at 03:29 PM »

cnc got saw dust for breakfast...

Gino · « **Reply #10013 on:** Jul 22, 2014 at 03:52 PM »

Aba, what's cooking?

JojoD818 · « **Reply #10014 on:** Jul 22, 2014 at 07:09 PM »

Quote from: Gino on Jul 22, 2014 at 03:52 PM

Aba, what's cooking?

Hahaha! Itlog pumasok sa isip ko, hindi egg crate yan bro

JojoD818 · « **Reply #10015 on:** Jul 23, 2014 at 12:15 AM »

sakto lang ah...

stickfighter · « **Reply #10016 on:** Jul 23, 2014 at 12:18 AM »

Quote from: JojoD818 on Jul 23, 2014 at 12:15 AM

sakto lang ah...

Nice Master JD!;)

timber715 · « **Reply #10017 on:** Jul 23, 2014 at 12:59 AM »

Quote from: JojoD818 on Jul 22, 2014 at 03:29 PM

cnc got saw dust for breakfast...

nang iingit ka brader eh....

teka teka, bakit di kahoy spacers mo? di naman kailangan bilog di ba? pero pwede rin pumutol ng chopsticks para wala ng plastic straw.... heheheh
better yet pagdikitin mo yung dalawa tapos pasadahan mo ng pattern bit para lumalim....

Gino · « **Reply #10018 on:** Jul 23, 2014 at 07:58 AM »

Type ko yung work bench. Well seasoned. Alam mong maraming pinagdaanan.

JojoD818 · « **Reply #10019 on:** Jul 23, 2014 at 02:29 PM »

Quote from: stickfighter on Jul 23, 2014 at 12:18 AM

Nice Master JD!;)

Thanks brader Martin!

My organizational skills are getting further than my art skills...