Author Topic: ONKYO AVR (Read 537449 times)

Conan · « **Reply #2040 on:** Mar 02, 2011 at 10:51 PM »

Quote from: epectos on Mar 02, 2011 at 10:36 PM

parang masyado syang bright. gusto ko sana balance. warm kasi ang klipsch reference. bright ang synergy

You'll have to experiment with turning the EQ to Manual and then tweaking each value until the sound matches your preference.

epectos · « **Reply #2041 on:** Mar 02, 2011 at 11:02 PM »

Quote from: Conan on Mar 02, 2011 at 10:51 PM

You'll have to experiment with turning the EQ to Manual and then tweaking each value until the sound matches your preference.

dko nga po alam ung mga frequency sa manual mode. kung anong ibig sabihin.

ninjababez® · « **Reply #2042 on:** Mar 03, 2011 at 02:05 AM »

Quote from: epectos on Mar 02, 2011 at 11:02 PM

dko nga po alam ung mga frequency sa manual mode. kung anong ibig sabihin.

check page 41-43 of your manual, it should give you an idea about cutoff frequency.

quick view online onkyo 608, then lower cutoff manually to 60hz or lower

leomarley · « **Reply #2043 on:** Mar 15, 2011 at 12:27 PM »

noob question here. how do i use the audio return feature of Onkyo 508?

Tempter · « **Reply #2044 on:** Mar 15, 2011 at 01:21 PM »

Quote from: leomarley on Mar 15, 2011 at 12:27 PM

noob question here. how do i use the audio return feature of Onkyo 508?

first, you should have a TV that is capable of ARC...

Conan · « **Reply #2045 on:** Mar 15, 2011 at 03:32 PM »

Quote from: Tempter on Mar 15, 2011 at 01:21 PM

first, you should have a TV that is capable of ARC...

Correct, plus an HDMI cable capable of audio return signal.

leomarley · « **Reply #2046 on:** Mar 18, 2011 at 03:40 PM »

i'm using Panasonic HDTV as my display unit and nakita ko sa manual ng Onkyo na supported and Panasonic Vieralink. do i need to use a HDMI version 1.4 then?

Tempter · « **Reply #2047 on:** Mar 18, 2011 at 04:06 PM »

Quote from: leomarley on Mar 18, 2011 at 03:40 PM

i'm using Panasonic HDTV as my display unit and nakita ko sa manual ng Onkyo na supported and Panasonic Vieralink. do i need to use a HDMI version 1.4 then?

Im not familiar with Vieralink, does this support ARC?

And yes, i believe you'll need HDMI 1.4 cables for that...

Stagea · « **Reply #2048 on:** Mar 18, 2011 at 04:35 PM »

Quote from: leomarley on Mar 18, 2011 at 03:40 PM

i'm using Panasonic HDTV as my display unit and nakita ko sa manual ng Onkyo na supported and Panasonic Vieralink. do i need to use a HDMI version 1.4 then?

Vieralink allows you to control connected Vieralink devices using your TV remote. You can also synchronize power events in some cases, and pass data between devices (channel info, etc.). Aside from Panasonic, many Yamaha and Onkyo models also support this feature.

Conan · « **Reply #2049 on:** Mar 18, 2011 at 07:02 PM »

Quote from: leomarley on Mar 18, 2011 at 03:40 PM

i'm using Panasonic HDTV as my display unit and nakita ko sa manual ng Onkyo na supported and Panasonic Vieralink. do i need to use a HDMI version 1.4 then?

Do you have another Panasonic component that has Vieralink? HDMI 1.4 spec is not needed for the Vieralink to function.

leomarley · « **Reply #2050 on:** Mar 18, 2011 at 09:39 PM »

Quote from: Conan on Mar 18, 2011 at 07:02 PM

HDMI 1.4 spec is not needed for the Vieralink to function.

i know sir but clarify ko lang kasi eto nakalagay sa website ng Onkyo:

Quote

ADVANCED FEATURES
HDMI® (Version 1.4a to Support 3D and Audio Return Channel) with Deep Color™, x.v.Color™, LipSync, Dolby® TrueHD, DTS-HD Master Audio™, DVD-Audio, Super Audio CD, Multichannel PCM, and CEC
Dolby® TrueHD, DTS-HD Master Audio™, Dolby® Digital Plus, DTS-HD High-Resolution Audio™ Decoding
Dolby® Pro Logic® IIz for New Surround Channels
Burr-Brown 192 kHz/24-Bit DACs (PCM1690) for All Channels
Jitter-Cleaning Circuit Technology
Audyssey 2EQ™ for Room Acoustic Correction
Audyssey Dynamic Volume™
Audyssey Dynamic EQ™ for Loudness Correction
Powered Zone 2 and Zone 2 Line-Out for Playback of Separate Source in Another Room
Overlaid On-Screen Display (OSD) via HDMI

Conan · « **Reply #2051 on:** Mar 19, 2011 at 08:22 AM »

Quote from: leomarley on Mar 18, 2011 at 09:39 PM

i know sir but clarify ko lang kasi eto nakalagay sa website ng Onkyo:

Does your TV have audio return function? If you don't then you don't need an HDMI cable with 1.4A spec.

leomarley · « **Reply #2052 on:** Mar 28, 2011 at 01:36 PM »

question about pure audio function of Onkyo TX-SR508. wala ba talaga output sa sub-woofer pag gamit yung function na 'to?

Conan · « **Reply #2053 on:** Mar 28, 2011 at 01:53 PM »

Quote from: leomarley on Mar 28, 2011 at 01:36 PM

question about pure audio function of Onkyo TX-SR508. wala ba talaga output sa sub-woofer pag gamit yung function na 'to?

None, it has to be in "Stereo" mode for the subwoofer to be active.

leomarley · « **Reply #2054 on:** Mar 28, 2011 at 02:37 PM »

Quote from: Conan on Mar 28, 2011 at 01:53 PM

None, it has to be in "Stereo" mode for the subwoofer to be active.

thank you sir!

Onkyo606 · « **Reply #2055 on:** Mar 28, 2011 at 08:03 PM »

Quote from: leomarley on Mar 28, 2011 at 01:36 PM

question about pure audio function of Onkyo TX-SR508. wala ba talaga output sa sub-woofer pag gamit yung function na 'to?

when doing Pure Audio, set your front speaker to full band.

kn89 · « **Reply #2056 on:** Mar 30, 2011 at 11:47 AM »

Quote from: leomarley on Mar 28, 2011 at 02:37 PM

thank you sir!

Actually once you use the pure audio mode it will bypassed unnecessary circuits, even the system menu.
Your av amp will work as an integrated amplifier.

leomarley · « **Reply #2057 on:** Mar 31, 2011 at 12:14 PM »

Also another problem. I connected my speakers via bi-amping and ever since i used this connection, following the instruction and wiring diagram on the user manual, whenever i connect my ipod touch via 3.5mm jack my Onkyo AVR flickers then turns off with a blinking red light and also the speakers make a little "boom" sound. anyone also experience this problem?

Tempter · « **Reply #2058 on:** Mar 31, 2011 at 01:18 PM »

Quote from: leomarley on Mar 31, 2011 at 12:14 PM

Also another problem. I connected my speakers via bi-amping and ever since i used this connection, following the instruction and wiring diagram on the user manual, whenever i connect my ipod touch via 3.5mm jack my Onkyo AVR flickers then turns off with a blinking red light and also the speakers make a little "boom" sound. anyone also experience this problem?

Hindi kaya sa Audyssey mic jack nyo naikakabit sir???

ndy · « **Reply #2059 on:** Mar 31, 2011 at 06:09 PM »

mga sirs magkano pa kaya mabenta onkyo htr500 ko? 5.1dd/dts no remote. 110v. tia.

monreq · « **Reply #2060 on:** Mar 31, 2011 at 08:14 PM »

Hello! My friend's Onkyo TX D797 auto shut off lately and frequently. What are the reasons for these? Pls.give some infos and where to bring this for repair in case the problem can't be solved. Thanks.

Conan · « **Reply #2061 on:** Mar 31, 2011 at 08:38 PM »

Quote from: monreq on Mar 31, 2011 at 08:14 PM

Hello! My friend's Onkyo TX D797 auto shut off lately and frequently. What are the reasons for these? Pls.give some infos and where to bring this for repair in case the problem can't be solved. Thanks.

Toyama is the local distributor of Onkyo:

Toyama Group Center
Distributor
line
Address

5th Floor, Toyama Group Center
22 Timog Avenue, Quezon City 1103 Philippines

Phone
+63-2355-7777

Fax
+63-2352-7388

monreq · « **Reply #2062 on:** Mar 31, 2011 at 09:57 PM »

Quote from: Conan on Mar 31, 2011 at 08:38 PM

Toyama is the local distributor of Onkyo:

Toyama Group Center
Distributor
line
Address

5th Floor, Toyama Group Center
22 Timog Avenue, Quezon City 1103 Philippines

Phone
+63-2355-7777

Fax
+63-2352-7388

Thanks Conan.

leomarley · « **Reply #2063 on:** Apr 01, 2011 at 08:46 AM »

Quote from: Tempter on Mar 31, 2011 at 01:18 PM

Hindi kaya sa Audyssey mic jack nyo naikakabit sir???

hindi sir. i've been using the Aux In line bago ko pa i-bi-amp yung connection sa speaker wala naman problem dati. ever since lang ginamit ko yung bi-amp dun nagkaproblema.

wengkapre · « **Reply #2064 on:** Apr 01, 2011 at 09:02 AM »

Sir monreq, meron din sa Toyama sa west ave., right side from near EDSA

Cosmic79 · « **Reply #2065 on:** Apr 02, 2011 at 10:12 PM »

Quote from: wengkapre on Apr 01, 2011 at 09:02 AM

Sir monreq, meron din sa Toyama sa west ave., right side from near EDSA

The Toyama sa West Ave is a showroom ata. Before kasi I inquired sa Toyoma about their showroom and they gave me the West Ave address, near EDSA

Conan · « **Reply #2066 on:** Apr 02, 2011 at 10:14 PM »

Quote from: Cosmic79 on Apr 02, 2011 at 10:12 PM

The Toyama sa West Ave is a showroom ata. Before kasi I inquired sa Toyoma about their showroom and they gave me the West Ave address, near EDSA

Timog is the new location of Toyama, it's in a very recently finished building.

wengkapre · « **Reply #2067 on:** Apr 04, 2011 at 02:33 PM »

Quote from: Cosmic79 on Apr 02, 2011 at 10:12 PM

The Toyama sa West Ave is a showroom ata. Before kasi I inquired sa Toyoma about their showroom and they gave me the West Ave address, near EDSA

Showroom yung 2nd floor sa Toyama West Ave, ground floor lang yung service center brader

Quote from: Conan on Apr 02, 2011 at 10:14 PM

Timog is the new location of Toyama, it's in a very recently finished building.

Saan banda malapit brader?

Conan · « **Reply #2068 on:** Apr 04, 2011 at 02:45 PM »

Quote from: wengkapre on Apr 04, 2011 at 02:33 PM

Showroom yung 2nd floor sa Toyama West Ave, ground floor lang yung service center brader

Saan banda malapit brader?

Somewhat across from the big Burger King on Timog.

♡ lvcdg23™ ✌ · « **Reply #2069 on:** Apr 05, 2011 at 08:02 AM »

Guys, good am. Tanong ko lang, kasi napansin ko parang sobra mag-init yung TX-SR508 ko. Ang pagkakaalam ko kasi 500 watts ang ratings nya pero sa init na pinoproduce nya parang more than 500 watts

Ganito ba talaga ang operating temperature ng Onkyo AVR's? Thanks