Topic: ONKYO AVR

[Lynn]

Nope. Made by Transparent brand (http://www.transparentcable.com/ ) yung sa akin, not transparent yung wire housing.

Its really a thick cable.

ah ok... yun akin normal lang na transparent, pero 12awg yun, as per "naka sulat sa housing ng wire".
ok nb? nagkasya na yun 12awg mo sa 313? try mo twist ng maigi then yun paglagay mo sa slots eh pa-twist din para pasok lahat ng threads...

[ninjababez®]

ah ok... yun akin normal lang na transparent, pero 12awg yun, as per "naka sulat sa housing ng wire".
ok nb? nagkasya na yun 12awg mo sa 313? try mo twist ng maigi then yun paglagay mo sa slots eh pa-twist din para pasok lahat ng threads...

di ba minsan napuputol unti unti yung strands ng speaker wire, di kaya mag short pag pinilit pihitin para lumiit? 

btw kung gusto mo talaga malaking gauge ng speakerwire gamitin, pwede naman itong IXOS OEM type 216 gold plated speaker pins from Narayan

[Lynn]

di ba minsan napuputol unti unti yung strands ng speaker wire, di kaya mag short pag pinilit pihitin para lumiit? 

btw kung gusto mo talaga malaking gauge ng speakerwire gamitin, pwede naman itong IXOS OEM type 216 gold plated speaker pins from Narayan

Yup minsan napuputol yun thread kapag sobra na sa twist, medyo nasanay na ako sa twist eh kaya less yun breakdown ng threads, if may maputol, ingat ako nadapat walang matira na thread loob or ibang threads na naka labas at nakadikit sa chassis. by the way ok yang speaker pins mo, less hassle...

[ninjababez®]

Yup minsan napuputol yun thread kapag sobra na sa twist, medyo nasanay na ako sa twist eh kaya less yun breakdown ng threads, if may maputol, ingat ako nadapat walang matira na thread loob or ibang threads na naka labas at nakadikit sa chassis. by the way ok yang speaker pins mo, less hassle...

oki yan bro click the link
gaganda products ni narayan

[Dollarman]

mga sirs, my current speakers are all rated 8ohms (polk). when i set up the speaker impedance sa 818 it allows me two choices lang. 4 or 6ohms. manual says if im using 8ohms speakers to set it at 6ohms. now pwede kaya kabitin ko ng rear surrounds na 75w 6ohms speakers from an old htib? masisira kaya amp ko if two diff kind of impedance ginagamit at the same time?

[elim]

ok lang bro basta hangang 6 ohms lang and low wattage. kaya ng 818 yan.

[Dollarman]

thanks brader. if ever di kaya may protection circuit ba ang 818 that will warn or shut down the unit?

[elim]

I dont think it does. I'm using mixed loads din with my 5008 LCR 6 ohms, surrounds 8 ohms.

[Dollarman]

I dont think it does. I'm using mixed loads din with my 5008 LCR 6 ohms, surrounds 8 ohms.

nice. at least may peace of mind na walang mangyari hehe

[Villaco]

Patulong naman po mga Gurus. I have this Onkyo 1007 w/ goes on protect mode at high volume starting at -8db. at first i thought it was just my voltage regulator, but when i connected it directly to the wall outlet, ganon pa din na protect mode pa rin.

Settings i've done w/ the AVR.

Auto audessy calibration
SPL calibration at 75db for fronts, center, surrounds & 80db for the 2 subwoofers

Ano po kaya problema dito? Sana matulongan nyo ako. Thank in advance.

[raider125jeigh]

Patulong naman po mga Gurus. I have this Onkyo 1007 w/ goes on protect mode at high volume starting at -8db. at first i thought it was just my voltage regulator, but when i connected it directly to the wall outlet, ganon pa din na protect mode pa rin.

Settings i've done w/ the AVR.

Auto audessy calibration
SPL calibration at 75db for fronts, center, surrounds & 80db for the 2 subwoofers

Ano po kaya problema dito? Sana matulongan nyo ako. Thank in advance.

check mo speaker cables and connection first...bAka may nagdidikit

[Villaco]

check mo speaker cables and connection first...bAka may nagdidikit

Just check my connection now, ok naman sila. Just played S.W.A.T. now even at 15db na protect mo na sya. Ano kaya problema nito?

[raider125jeigh]

Just check my connection now, ok naman sila. Just played S.W.A.T. now even at 15db na protect mo na sya. Ano kaya problema nito?

try mo stereo nagprotect ba? Same vol level? Make sure tama lahat at walang male sa left and right connection... Ilan gamit mong speakers

[Billabong]

What speakers are you using and how many ang naka-connect sa onkyo receiver mo?

Does it happen before or recently mo lang na-encounter?

[Villaco]

What speakers are you using and how many ang naka-connect sa onkyo receiver mo?

Does it happen before or recently mo lang na-encounter?

Dati na po. Ngayon nag play ako ng audio lang ok naman sya at 0dB. D man na protect mode.i tried use my SPL meter kako baka mahina lang source ko, pero napalo sya sa 100dB. Bali ang set-up ko is 6.2 single rear surround lang po. As per instruction sa left back surruond channel ko sya ikinabit.
Naka All Ch Stereo ang mode nya. D man na protect mode.

Ang gamit ko palang speakers ay front=MS carnival 6, center= polk audio csi a6, side surruond= MS carnival 3, rear surround= MS carnival 5.

[Billabong]

Dati na po. Ngayon nag play ako ng audio lang ok naman sya at 0dB. D man na protect mode.i tried use my SPL meter kako baka mahina lang source ko, pero napalo sya sa 100dB. Bali ang set-up ko is 6.2 single rear surround lang po. As per instruction sa left back surruond channel ko sya ikinabit.
Naka All Ch Stereo ang mode nya. D man na protect mode.

Ang gamit ko palang speakers ay front=MS carnival 6, center= polk audio csi a6, side surruond= MS carnival 3, rear surround= MS carnival 5.

Most likely hirap yung receiver mo to power all your speakers kaya nagpo-protect siya during loud passages. Kapag music kasi it's only 2 channel stereo kaya kahit na malakas yung volume kaya pa din ng receiver. Have you tried switching the speaker settings of your Onkyo receiver to 4ohms? Because your MS speakers' impedance dip to 4ohms according to specs.

[AppleMan]

^_Korak si brader hirap si AVR na i-handle yung mga speaker mo kung 4 ohms si speaker...check mo nga settings ng speaker sa AVR kung naka 4 ohms....TIA!

[busabos]

818 users, what's your usual volume level? With my old 606, I dont usually exceed 50 but with the 818 I sometimes have to crank the volume as high as 70, is that normal?

I know that the 818 is way powerful than the 606 but with mine, it doesnt appear to be.

Please help

[ninjababez®]

818 users, what's your usual volume level? With my old 606, I dont usually exceed 50 but with the 818 I sometimes have to crank the volume as high as 70, is that normal?

I know that the 818 is way powerful than the 606 but with mine, it doesnt appear to be.

Please help

di ka lang siguro sanay sa cleaner output ng 818 mo bro. 

[busabos]

Does your 818 come with stickers in front, like the features and specs? Mine doesnt have any and Im concerned that it's not bnew and might be refurb. Can someone validate, thanks!

[obsi]

Maybe why I like the old oinks, nearer to advertised specs.  For example here are apples to apples tests from the same mag.  Close to bottom line 606 vs close to top line 5008.  The all 5 channel and 7 channel output seems to be a wash ;^)

http://www.hometheater.com/content/onkyo-tx-sr606-av-receiver-ht-labs-measures

http://www.hometheater.com/content/onkyo-tx-nr5008-av-receiver-ht-labs-measures

[ninjababez®]

Maybe why I like the old oinks, nearer to advertised specs.  For example here are apples to apples tests from the same mag.  Close to bottom line 606 vs close to top line 5008.  The all 5 channel and 7 channel output seems to be a wash ;^)

http://www.hometheater.com/content/onkyo-tx-sr606-av-receiver-ht-labs-measures

http://www.hometheater.com/content/onkyo-tx-nr5008-av-receiver-ht-labs-measures

thanks for sharing bro!  planning to get the 5008 pa naman

[obsi]

thanks for sharing bro!  planning to get the 5008 pa naman

don't let my comment disuade you, the new models have a lot of features that may be usefull to you.

[raider125jeigh]

805 rocks hihihi.  Fanboi here lol

[Billabong]

thanks for sharing bro!  planning to get the 5008 pa naman

Mag 3009 or 5009 ka na para mas bago. Kung bitin ka pa sa power pwede naman mag-add ng power amp in the future.

[raider125jeigh]

Mag 3009 or 5009 ka na para mas bago. Kung bitin ka pa sa power pwede naman mag-add ng power amp in the future.

yup..wala masyado issue ung 09 series

[elim]

bro ninjababez, If youre planning to get a 3009/3010 i may be able to give you a good deal

[Dollarman]

di ka lang siguro sanay sa cleaner output ng 818 mo bro. 

Or malaki kaya ang room? Mine is at 55 to 60 and its enough for me na

[ninjababez®]

bro ninjababez, If youre planning to get a 3009/3010 i may be able to give you a good deal

thanks bro, item mo talaga ang tinitingnan ko. 
wala nga lang budget ngayon 

[Lynn]

question lang sa mga Onkyo AVR, same din ba sa inyo na super hot sya? kasi may Rotel and HK din ako pero hindi nmn ganun ka hot kapag ginagamit, pero yun Onkyo grabe sa init kaya nilalagyan ko pa ng Fan.