Topic: RECESSION...

[skylynx888]

UPDATED: MAY 26, 2008
Comments, suggestions are welcome. Thanks           

Konting updates lang po..... 

HT : Onkyo 805 previous - HK335


AUDIO: Cayin MT-12 --> this made my 8.3 sing and dance 

KARAOKE naman  : MAGIC SING / VINTAGE TECHNICS STEREO RECEIVER SA-939 / SONY STEREO SPEAKERS

VINTAGE models na yun stereo receiver at speakers kasi yun singer eh VINTAGE MODEL na din 

 

The GEARS:

RPTV: Philips 55PP9527 Pixel Plus Widescreen
AVR: Harman Kardon HK335 7.1 receiver
DVD Players: Pioneer DV-696AV-s / Pioneer DV-533K
Speakers [7.1]:
  Front: Wharfedale 9.6 Cherry
  Center: Wharfedale 9CS Cherry
  Rear: Wharfedale 9DFS
  Surround back: Wharfedale 8.3 Black
Subwoofer: DQ-12
AV Rack: Sigma Rack
Interconnects:
 Monster Component Video Cable 3.0m
 Monster Cable Home Series Fiber Optic Cable 1.2m
 Monster THX 400 Subwoofer Cable 3.0m
Speaker Wires:
  Gauge 12 for front and center / Gauge 14 for surrounds 
   Banana Plugs
Acoustic Treatment: Do-It-Yourself
Center Speaker Stand: Do-It-Yourself

14 months after discovering PINOYDVD,I've learned a lot    , SPENT A LOT   ..NOW I'M BROKE  :'( :'( , d bale MASAYA naman !     
 

Still Dreaming for a good Power Amplifier and Subwoofer upgrade

[/b]
 [/color][/size]

Previous Setup

TV : S-A-M-E
Receiver: Yamaha RX-V440 [sold]
DVD player: Pioneer dv533k/ Philips DVP642k
Speakers[6.1]:
 Front: Wharfedale 8.3 black
 Center: Wharfedale 8CM [sold]
 Surrounds/Rear Center: Wharfedale WH2 Set [sold]
Subwoofer: DQ-12
[/color]

 

[MAtZTER]

Ahah! eto nah!!!

Kala ko ba eh dadaan ka sa manila & you will PM me?

Hope this diagram helps:

[jojitv]

Grabe na toh!!! May outbreak na nga dito sa PDVD. Hehehe. Good luck on your setup sir. 

[skylynx888]

Ahah! eto nah!!!
Kala ko ba eh dadaan ka sa manila & you will PM me?

thanks LORD Matz! Naging busy kc the last time i was there, but  I'll be in Manila again by the 1st week of September, inform kita, may mga upgrades pang dapat gawin 



THANKS bro jojitv, incurable na ang SARS :'(

[jojitv]

THANKS bro jojitv, incurable na ang SARS

Buti sakin, contained for now. Wala kasi pera. hahaha 

[Zitr0]

Congrats on your future set up bro.

Honestly, my hands are up high to you because you know were to start. acoustics muna!

Pro one sugestion/advise lng po sir, since you are still in the process of building it, try building your room around the speakers, and not the other way around. so be sure what speakers first you'll be getting para mamaximize ung construction ng room and hindi yung maglalast adjustments when the room is already fix.

just a thought. 

just my 2 cents po. no offense and with respect!

peace.

[skylynx888]

Congrats on your future set up bro.

Honestly, my hands are up high to you because you know were to start. acoustics muna!

Pro one sugestion/advise lng po sir, since you are still in the process of building it, try building your room around the speakers, and not the other way around. so be sure what speakers first you'll be getting para mamaximize ung construction ng room and hindi yung maglalast adjustments when the room is already fix.

  Thank you bro for your suggestion, actually na demo ko na partialy yun room last sunday [hinde na kc makatiis ], so far satisfied naman ako, i will just be transfering my gears from my bedroom, there might be some gears upgrade , but at the moment HT room muna, hinde kaya pagsabayin

[deo]

Grabe na toh!!! May outbreak na nga dito sa PDVD. Hehehe. Good luck on your setup sir. 

Ung SARS mo kasi nag rreside lang sa utak,..mas mahirap un., para kang adik na nag hahanap ng pang bili ng droga. Baka malaman ko na lang, nag lalabas ka na ng mga office supplies dto ah!?

[deo]

Ahah! eto nah!!!

Hope this diagram helps:

Mukang eto na ang susunod na IMATZ theater..aabangan ko to. 

[classicman]

skylynx888, this is one hell of a great HT in the making, by the looks of it mukhang malaki ito ......good luck & congrats in advance

[skylynx888]

Boss Deo, pag nanalo na ako sa lotto, pwedeng pwede ang iMatz theater!!!!!! pati IMAX theater isama ko na!!!

Atty classicman, model ko nga HT room mo,  will just  be using my old gears for now ,  nagpapahanap pa kasi ako ng  gamot sa SARS  , baka meron dito sa amin, tapos benta ko na lang dito sa mga members to fund my upgrades! mwahahahahahahahaha!!!!!!! [/font]

[Full HD 3D]

Ahah! eto nah!!!

Kala ko ba eh dadaan ka sa manila & you will PM me?

Hope this diagram helps:

On this drawing,which figure do we use on what part of the wall,Front,side or back?Thanks!

[skylynx888]

boss ernie, what i did for my sidewalls, backwall are similar to the mid/high absorber in the diagram.

[mheloy]

On this drawing,which figure do we use on what part of the wall,Front,side or back?Thanks!

Sir matz,

so kahit 1 inch pwede pa din... balak ko kasi 2"... as long as may air gap in between the walls and fabric...
hmmm... mas  tipid ito...

[skylynx888]

Sir matz,
so kahit 1 inch pwede pa din... balak ko kasi 2"... as long as may air gap in between the walls and fabric...
hmmm... mas  tipid ito...

actually sir 2" yun ginamit kong insulator.


100th

[mheloy]

actually sir 2" yun ginamit kong insulator.

may space ka pa ba in between wall and absorber just like dun sa pic ni mat?
BTW saan and how much nabili ito sir?

Thanks

[skylynx888]

bro mheloy, yep may space po sya between the absorber and the wall, tapos  space ulit between the absorber and plywood. I got my 2" fiberglass insulator [Owens Corning] from Cebu, it was referred to me by Classicman, then i had it shipped dito sa Zamboanga

15meters in 1 roll, width is 1.2meters.

[mheloy]

bro mheloy, yep may space po sya between the absorber and the wall, tapos  space ulit between the absorber and plywood. I got my 2" fiberglass insulator [Owens Corning] from Cebu, it was referred to me by Classicman, then i had it shipped dito sa Zamboanga

15meters in 1 roll, width is 1.2meters.

3k mo din nakuha? dito sa manila nag inquire ako.. 5.7k yung 32kg na 2" 1.2 mx 15m
yung owens dito na same size per 16kg ang density 2.8k na...

Thanks

[skylynx888]

bought it 2 weeks ago, I got it at P1700.00 (mas magaling yata ako tumawad kaysa kay Classicman, hehehehe)

[mheloy]

ayos ah... sobrang mura... 

[classicman]

bought it 2 weeks ago, I got it at P1700.00 (mas magaling yata ako tumawad kaysa kay Classicman, hehehehe)

obvious ba, hehehe .......or baka naman gauge 16 lang ang density ng nakuha mo at hindi 32

[mheloy]

bro mheloy, yep may space po sya between the absorber and the wall, tapos  space ulit between the absorber and plywood. I got my 2" fiberglass insulator [Owens Corning] from Cebu, it was referred to me by Classicman, then i had it shipped dito sa Zamboanga

15meters in 1 roll, width is 1.2meters.

Pwede ba ito? yung wall-> absorber -> plywood.... akala dapat instead of plywood, fabric na dapat?
hindi ba reflective yung plywood?

Thanks

[skylynx888]

obvious ba, hehehe .......or baka naman gauge 16 lang ang density ng nakuha mo at hindi 32

no offense bro ha , gauge 32 din sya

[classicman]

no offense bro ha , gauge 32 din sya

of course, no offense taken ........hihingi lang ako ng refund kay Flor

[classicman]

Pwede ba ito? yung wall-> absorber -> plywood.... akala dapat instead of plywood, fabric na dapat?
hindi ba reflective yung plywood?

Thanks

bro, mas effective nga ang fabric na front panel as sound absorber, pero IMO dapat there should be a balanced combo of aborbers & reflectors sa HT room mo, otherwise baka maging "acoustically dead" sya........here's a link to good discussions on acoustic treatment:

http://www.avsforum.com/avs-vb/showthread.php?t=255432

http://www.ethanwiner.com/acoustics.html

 

[skylynx888]

thanks for the help classicman, ngdemo ako partially with the current structure, satisfied na din ang ears ko, but i will still be covering it with fabric ones natapos na lahat ng construction, hinde ko pa kc na order, need funds pa :'(

[classicman]

thanks for the help classicman, ngdemo ako partially with the current structure, satisfied na din ang ears ko, but i will still be covering it with fabric ones natapos na lahat ng construction, hinde ko pa kc na order, need funds pa :'(

you're welcome bro .......musta mo nalang ako kay panyero, kapatid na pulang leon pala sya

[Full HD 3D]

3k mo din nakuha? dito sa manila nag inquire ako.. 5.7k yung 32kg na 2" 1.2 mx 15m
yung owens dito na same size per 16kg ang density 2.8k na...

Thanks

Where can we purchase Owen Corning in Manila?Thanks for the Info. Mga Sir.

[mheloy]

Where can we purchase Owen Corning in Manila?Thanks for the Info. Mga Sir.

I saw one sa Ortigas Home Depot

6384039
16 kg 1.2 x 15m 1" P1434
16 kg 1.2 x 15m 2" P2858
baka may 32kg sila

[deo]

Stage 2 pic naman jan!