Finally decided to start setting up . Sorry for the quality of the pics phone cam lang
The KRP 500 is not as thin as the Led LCD's but better than the older gen
Undergoing BurnIn
From AVS Forum
Recommended 150 Hour Break-In settings for Pioneer 101FD/111FD/141FD/151FD (ONLY to be used with Evangelo2's Break-in DVD or Thumbdrive Files!!!!!!!!)
*****Note: This procedure is designed to be performed only during the first 150 hours of the display's lifespan.
This procedure is designed to ensure the reference settings listed below provide maximum satisfaction. This procedure is NOT designed nor recommended to be used solely as Image Retention and/or Burn-in prevention.*****
~ 370 watts .......
Temporary setup . Still under the 150 Hour B/I .
From Avs forum ... What is good about the Krp500
http://www.avsforum.com/avs-vb/showthread.php?p=16610558#post16610558I can probably only tell the difference between the black bars and the bezel because I know the black bars are there.
You are not seeing things. The 500M and snobby brother (PRO-101FD) share a revised version of original 9G PDP module. These revised PDP models add additional Kuro tech that we would have seen on the 10G Kuros. The difference between the 500M and 111FD I have is almost as dramatic as the difference between the 8G Kuros and "Rev A" 9G Kuros.
Parang 3rd Gen Kuro na pala ito
I just did a short comparison w/ my other flat panel and what I saw was the details in the black scene are not washed out , on my other display it was only black on this one you see the graduation of the black and see the details , also I saw dark brown shirt on the KRP , but on a different display it was a different shade of black ....
Maybe this is just calibration . But I did not expect nor was looking to see these details but it was very obvious . I will try to see if I can take a proper picture to show it .