i have a luxman m02 and c02 amps and a pair of ns50 yamaha speakers. what a audio bookshelf speakers can i include with my setup? i'd like to have a nice sounding setup for music. here are the specs of my luxman amps:
Luxman M-02
1. General
System: Transistor Power Amplifier
Colour: 1=Silver, 2=Black: Champagne Gold
Power Amplifier
Speaker Outputs: 2 x 2 Speakers; Phones
Continuous power 8Ω: 130 + 130 (IHF); 400 (Mono) Watts
Frequency Response: 10-100,000 (-0.5 dB) HZ
Input Sensitivity: 1200 mV
Input Impedance: 45 kΩ
Signal to Noise Ratio: >120 (IHF A) db A, short circuited
Harmonic Distortion: >0.02 % at rated output
2. Physical
Dimensions in Inches: 17.8 x 12.5 x 3.2 (w) x (h) x (d)
Dimensions in mm: 453 x 317 x 81 (w) x (h) x (d)
Weight in lbs: 32 lbs
Weight in Kg: 14.5 Kg
Luxman C02
1. General
System: Transistor Pre Amplifier
Colour: 1=Silver, 2=Black: 1
Pre Amplifier
Inputs: 1 Phono (MM+MC); DAD; Line; Tuner; 2 Tape;
Inp. Sensitivity High Level: 125 mV
Inp. Impedance High Level: 150 kΩ
Frequency Response High Level: 10-80,000 (±0.3 dB) HZ
Signal/Noise High Level: > 108 db
Inp. Sensitivity Phono MM: 2.0 mV
Inp. Impedance Phono MM: 50 kΩ
Frequency Response Phono MM: (+MC) 20-20,000 (±0.3 dB)
Signal/Noise Phono MM: > 90 (IHF A) db
Inp. Sensitivity Phono MC: 0.1 mV
Inp. Impedance Phono MC: 0.3/ 0.1/0.04 kΩ
Signal/Noise Phono MC: > 74 (IHF A, 250 μV) db
Outputs: 2 REC OUT; 2 PRE OUT
Harmonic Distortion: <0.005 (Phono MM/AUX); <0.007 (Phono MC) % at rated output
Impedance Pre Out: 0.1 kΩ
Output Voltage Pre Out: 1000 (1800 max.) mV
Equalizer
Tone Controls: Bass; Treble
Frequencies: Bass ±10 dB; Treble ±10 dB
2. Physical
Dimensions in Inches: 17.8 x 12.5 x 3.2 (w) x (h) x (d)
Dimensions in mm: 453 x 317 x 81 (w) x (h) x (d)
Weight in lbs: 15.4 lbs
Weight in Kg: 7 Kg
i'm very new to this hobby so any suggestions will be highly appreciated. please consider my budget too. 7k and below:)