Topic: A-AUDIO Speaker Creations!!!

[frontANDcenter]

@macdon

Thanks sir... I know..im excited. Haha. Really excited! 

[frontANDcenter]

Thanks Sir Anthony for the cool prize!! Ngayon lang ako nanalo sa raffle, grand prize pa. It took a while for everything to completely register.haha..Thank you sir!! More power to you! you're the BEST! Merry Christmas!

[juanch]

Thanks Sir Anthony for the cool prize!! Ngayon lang ako nanalo sa raffle, grand prize pa. It took a while for everything to completely register.haha..Thank you sir!! More power to you! you're the BEST! Merry Christmas!

Congrats Dan. who would have thought. Merry Christmas! 

[vips8888]

6th prize..... (BS 5" tablette speakers) - Vips8888



Thanks so much guys .... Merry talaga xmas natin, congrats also to all the winners!!

Sir Anthony galing ng promo mo.....

Thanks
Vips8888

[frontANDcenter]

Congrats Dan. who would have thought. Merry Christmas! 

Thanks sir! Who would have thought indeed!!! Now i need to figure out what to do with em huge speakers! Those PSB 8"woofers may be too much to blend with my setup! But ill definitely think of something. Ill call them my "lucky speakers"!haha.. Merry Christmas!!

[nsp]

hi sir anthony and other masters.
i'm in the process of setting up my very first ht. after months of auditioning and lurking at pdvd, i finally pulled the trigger on the display and video source. next up will be receiver and 5.1 speaker set.
for the receiver, i am considering the pioneer vsx520 or onkyo txsr308 or onkyo hts3300 htib. .
for the speakers, the a-audio is very high on my list.

can you recommend a 5.1 speaker set for me. here are my requirements:
- should be a complete set. i am a newbie on this and i think i do not have the capability yet to mix and match the tonal characteristics of different speakers. baka kapag bumili ako per piece, di maging complementary yung sounds nila. sayang naman.
- budget is 15k. give or take a couple of k
- usage is 60% movie and 40% music
- i am after clarity and accuracy and not power. family ko lang ang gagamit so di kailangan marinig ng kapitbahay.
- audition/purchase is after christmas.

thanks.

[ninjababez®]

Anthony Thanks in advance .. napaka-daling kausap nitong taong ito 

[diy_master]

yahoo!!! panalo rin ako 5th prize, maraming thanks po St. Anthony. Hope and pray mas maraming blessings din ang babalik sa iyo!!!

Salamat din, Sir!

[diy_master]

Anthony Thanks in advance .. napaka-daling kausap nitong taong ito 

Welcome, Sir!

[diy_master]

 

[CMac]

^Harbeth clone soon? 

[macdon]

Patay na.........tupayb nalang ang Herbeth 

[ninjababez®]

Patay na.........tupayb nalang ang Herbeth 

good news ba ito bro?
im not familiar with the brand .. pang sony htib lang kasi alam ko e 

[simonzaide]

naku po !! mukhang may bago nanaman tayong pagiipunan

[wengkapre]

naku po !! mukhang may bago nanaman tayong pagiipunan

Patay na.........tupayb nalang ang Herbeth 

@simonzaide
@macdon...tupayb nga lang sana po sana, baka wanpayb nga lang e kasi isa't kalahating dangkal lang ni Anthony

[macdon]

@simonzaide
@macdon...tupayb nga lang sana po sana, baka wanpayb nga lang e kasi isa't kalahating dangkal lang ni Anthony

Baka naman tupayb ang isang piraso

[dok]

dahil sa wala pa din akong napili (at pambili) kung genesis, D1 or D2... nagbasa nalang ako ng review ni harberth bautista.

Harbeth HL-P3: $1199/pair
Harbeth was founded by Dudley Harwood and his wife Elizabeth—hence "Har" and "Beth"—and made its name in 1977 with a Spendor BC-1–sized monitor speaker that used a seminal polypropylene-cone woofer developed by Harwood. The company never really grew as a business to match the quality of its products, and was bought by ex-NEC engineer Alan Shaw in 1987. Alan obviously had the magic touch—in one year Harbeth's gross income grew from $165,000 the last year it was run by Harwood to $1.5 million—and the company is a major exporter to the Far East.

The HL-P3 was introduced in 1991 but has only recently been available in the US. Its cabinet, made from 12mm MDF rather than plywood, is the same size as an LS3/5a's, the main differences being that the veneered, 18mm-thick baffle is not set in, and the grille is a single sheet of black cellular foam. The drive-units are a 19mm aluminum-dome tweeter from SEAS and a 110mm polypropylene-cone woofer constructed on a diecast chassis. Unlike the LS3/5a, which throws out a stray field that confuses airplane compasses, the HL-P3's units are magnetically shielded to allow the speakers to be used close to a TV set or monitor. (Five HL-P3s plus a subwoofer would make a very high quality Home Theater system.) As in the LS3/5a, the woofer is mounted from behind the baffle, which might be thought to introduce some dispersion anomalies; in fact, it was done to smooth out the off-axis behavior.

The drive-units are crossed over at 3.5kHz with a 21-element crossover, featuring 18dB/octave electrical slopes. The low-pass and high-pass sections are completely separate and are brought out to separate pairs of terminals on the rear panel to allow bi-wiring. Much use was made of computer modeling in the speaker's design. The HL-P3 is intended to be used on high-quality stands away from room boundaries.

[dok]

close-up of P3ESR crossover network

[macdon]

In last month's hifi show in Mandarin, there were two Harbeth speakers:

the small Harbeth is the P3ESR.........100k
the bigger Harbeth is the Compact 7ES3..........150k

Once you hear a Harbeth, you'll never forget it for the rest of your life

[diy_master]

hi sir anthony and other masters.
i'm in the process of setting up my very first ht. after months of auditioning and lurking at pdvd, i finally pulled the trigger on the display and video source. next up will be receiver and 5.1 speaker set.
for the receiver, i am considering the pioneer vsx520 or onkyo txsr308 or onkyo hts3300 htib. .
for the speakers, the a-audio is very high on my list.

can you recommend a 5.1 speaker set for me. here are my requirements:
- should be a complete set. i am a newbie on this and i think i do not have the capability yet to mix and match the tonal characteristics of different speakers. baka kapag bumili ako per piece, di maging complementary yung sounds nila. sayang naman.
- budget is 15k. give or take a couple of k
- usage is 60% movie and 40% music
- i am after clarity and accuracy and not power. family ko lang ang gagamit so di kailangan marinig ng kapitbahay.
- audition/purchase is after christmas.

thanks.

Sir, sent you pm!

[juanch]

Came from Anthony's lair this afternoon and got to see the Harbeth speaker 

Too bad it didn't have a pair. Can't wait to hear this new project. 

[zekiber2]

ano ba mga nagpapa inspire kay master anthony? parang need nya laging mainspire hehe tayong lahat magbenefit ^^,

[DonMiguel85]

Came from Anthony's lair this afternoon and got to see the Harbeth speaker 

Too bad it didn't have a pair. Can't wait to hear this new project. 

Obsessed! It's not healthy na! 

[ninjababez®]

hi bro, nakuha mo yung PM ko regarding velo tweets on my new genesis center?
may extra pa kasi ako dito sa exodus eh 

[bpc_dnd2]

i would be transferring to a condominium by march next year.  The thing is, the sala is very small.  What fronts can i use for this kind of setup? thanks.

[Nelson de Leon]

Obsessed! It's not healthy na! 

I'd prefer to use addicted rather than obsessed. 

[JoeyGS]

Antony should be able to give you which of his speaker creations can be placed against the wall without distorting the frequencies, especially the bass frequencies.

i would be transferring to a condominium by march next year.  The thing is, the sala is very small.  What fronts can i use for this kind of setup? thanks.

[Nelson de Leon]

Antony should be able to give you which of his speaker creations can be placed against the wall without distorting the frequencies, especially the bass frequencies.

Yap. Front firing preferably.

[diy_master]

hi bro, nakuha mo yung PM ko regarding velo tweets on my new genesis center?
may extra pa kasi ako dito sa exodus eh 

pm sent. Sir!

[diy_master]

i would be transferring to a condominium by march next year.  The thing is, the sala is very small.  What fronts can i use for this kind of setup? thanks.

Genesis FS. Sir!