Topic: Help needed po

[bonelopez]

pag nag play po kasi ko ng mga movies na PAL ang Source, black&white po ang playback
hindi ko naman po makita sa settings ng DVD kung san aayusin don, ang player po namin ay
Pioneer DV-300-S
tapos ang tv po namin ay 13yrs old na Sony Trinitron
help naman po

 

[dbdbd]

tv po namin ay 13yrs old na Sony Trinitron

Try to check you're TV. Malamang hindi sya multi system. Kailangan mo kasi tv dapat multi system para maging colored ang viewing mo.

[mattia]

pag nag play po kasi ko ng mga movies na PAL ang Source, black&white po ang playback
hindi ko naman po makita sa settings ng DVD kung san aayusin don, ang player po namin ay
Pioneer DV-300-S
tapos ang tv po namin ay 13yrs old na Sony Trinitron
help naman po

 

In your DVD player, go to Video Settings then set to PAL.  Usually it's set to NTSC or Multi.

Pero dapat your TV set should be MULTI din para mag play ang PAL.  If not, ala ka magagawa diyan.

[d4nu65+3R]

kung black and white ang picture na lumalabas sa tv, most probably multi system tv mo dahil from my experience, walang picture na makikta when you view movies from a pal source. so most probably nasa player mo ang key.  follow the directions sa above post and you're ok.

[barrister]

The video system of your TV is NTSC, so video input should also be NTSC.  If video input is PAL, you will usually get a hazy black & white picture that rolls vertically. 

Your DVD player is capable of NTSC or PAL and can convert video sources from NTSC to PAL and vice-versa.

System selections of your DVD player are NTSC, PAL and AUTO.  The default setting is AUTO, which means that an NTSC source will be output as NTSC, and a PAL source will be output as PAL.

You have to change the DVD player's system setting to NTSC.  Your manual has instructions for changing the system setting. 

You will have to use the player's buttons, not the buttons on the remote.  Start with standby mode, press and hold forward button, then press power button to turn on.  Changes will cycle through PAL, NTSC and AUTO.   

When the DVD player is set to NTSC, it will always output in NTSC.  An NTSC source will be output in NTSC, but a PAL source will first be converted to NTSC by the player internally, then output to the TV in NTSC.

[bonelopez]

The video system of your TV is NTSC, so video input should also be NTSC.  If video input is PAL, you will usually get a hazy black & white picture that rolls vertically. 

Your DVD player is capable of NTSC or PAL and can convert video sources from NTSC to PAL and vice-versa.

System selections of your DVD player are NTSC, PAL and AUTO.  The default setting is AUTO, which means that an NTSC source will be output as NTSC, and a PAL source will be output as PAL.

You have to change the DVD player's system setting to NTSC.  Your manual has instructions for changing the system setting. 

You will have to use the player's buttons, not the buttons on the remote.  Start with standby mode, press and hold forward button, then press power button to turn on.  Changes will cycle through PAL, NTSC and AUTO.

When the DVD player is set to NTSC, it will always output in NTSC.  An NTSC source will be output in NTSC, but a PAL source will first be converted to NTSC by the player internally, then output to the TV in NTSC.

thanks po, ok na po, colored na po ngayon yung mga movies

salamat Sir. Barrister

[audiojunkie]

Most DVD players have lot of settings  from Video to Audio, so take time to navigate and play around with other audio settings that might enhance the music output to your own taste.... 

[rysanti]

same problem.. was able to solve this before but lately when i turned on my dv 383 it turned b&w, adjusted to PAL/NTSC/Auto but to no avail, still b&w screen. TV is a sony wega w/c is a multi system. What do you think the problem is??? help!

[bonelopez]

sir. same problem po ulit pero ibang model naman po ng pioneer to (Pioneer XV-GX3)
pinagawa ko po sa friend ko yung "hold power then forward button" ayaw po gumana...
pano po kaya ang configuration nito?

[bonelopez]

^ up help po please sana may maka figure out po sa inyo... nag download na rin po kasi ko ng mga manuals nitong pionere na to wala po sa instruction kung pano i chage sa NTSC or PAL

[barrister]

sir. same problem po ulit pero ibang model naman po ng pioneer to (Pioneer XV-GX3)
pinagawa ko po sa friend ko yung "hold power then forward button" ayaw po gumana...
pano po kaya ang configuration nito?

"Hold power then forward"?  Di ba "Hold forward then power"?

Here's a manual for XV-GX3:

http://safemanuals.com/user-guide-instructions-owner-manual/PIONEER/XV-GX3%20@@%20S-GX3V-_E

Page 33 says:
1 If necessary, switch into standby. This is necessary if you want to access the System Setup menu options in standby below.
2 Press SYSTEM SETUP (SHIFT+HOME MENU).
3 Use (cursor left/right) to choose the setting then press ENTER.

Page 34 says:
• After selecting TV SYS in step 3 above, press ENTER to change the TV system.